Hi Maxime, W dniu 25.08.2022 o 17:55, Maxime Ripard pisze: > Hi Mateusz, > > On Mon, Aug 22, 2022 at 10:57:26AM +0200, Mateusz Kwiatkowski wrote: >> Hi Maxime, >> >> I tried testing and reviewing your changes properly over the last weekend, but >> ultimately ran into this ("flip_done timed out" etc.) issue and was unable to >> mitigate it, at least so far. This seems to pop up every time I try to change >> modes in any way (either change the TV norm, or just try doing >> "xrandr --output Composite-1 --off" followed by bringing it back on; it also >> means that the Pi goes unusable when the DE's screen saving routine kicks in). >> >> I'm using a Pi 4, and it works with the rpi-5.13.y branch >> https://github.com/raspberrypi/linux, but seemingly nothing newer. >> I specifically tried rpi-5.14.y, rpi-5.15.y and rpi-5.19.y - rpi-5.15.y, >> which is the current main branch in Raspberry Pi OS, seems to be broken since >> forever; at least since my patches (originally written for 5.10) landed there. >> >> I'll try identifying the issue further, possibly later today, and maybe check >> the rpi-6.0.y branch as well. > > I've tried it this, and I can't reproduce it here. But I'm curious, how > did you apply this series? rpi-5.13.y is probably full of conflicts > everywhere? I applied your patches onto rpi-5.15.y. There were conflicts, but they seemed relatively minor. I'm not sure if I did a good job at resolving them - I ran into various problems trying to test your changes, but I chose not to criticize you before making sure that it's really due to your changes, or without some remarks more constructive than "doesn't work" ;-) I can push my rebase onto some Github fork if you're interested. I was able to work around some of those problems, and also saw that some of them were already mentioned by other reviewers (such as the generic modes not matching due to the aspect ratio setting). Ultimately I got stuck on this bug, so I put testing this series on hold in favor of debugging the bigger issue. So far unfortunately no luck with it. I did not try rebasing your changes onto 5.13 or older. > Maxime Best regards, Mateusz Kwiatkowski