Re: [PATCH v26 07/10] soc: mediatek: mmsys: add mmsys for support 64 reset bits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 19/08/2022 08:10, Nancy.Lin wrote:
Add mmsys for support 64 reset bits. It is a preparation for MT8195
vdosys1 HW reset. MT8195 vdosys1 has more than 32 reset bits.

1. Add the number of reset bits in mmsys private data
2. move the whole "reset register code section" behind the
"get mmsys->data" code section for getting the num_resets in mmsys->data.

Signed-off-by: Nancy.Lin <nancy.lin@xxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>
Tested-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
---
  drivers/soc/mediatek/mtk-mmsys.c | 40 +++++++++++++++++++++-----------
  drivers/soc/mediatek/mtk-mmsys.h |  1 +
  2 files changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 999be064103b..20ae751ad8a7 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -20,6 +20,8 @@
  #include "mt8195-mmsys.h"
  #include "mt8365-mmsys.h"
+#define MMSYS_SW_RESET_PER_REG 32
+
  static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
  	.clk_driver = "clk-mt2701-mm",
  	.routes = mmsys_default_routing_table,
@@ -86,6 +88,7 @@ static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
  	.routes = mmsys_default_routing_table,
  	.num_routes = ARRAY_SIZE(mmsys_default_routing_table),
  	.sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
+	.num_resets = 32,
  };
static const struct mtk_mmsys_match_data mt8173_mmsys_match_data = {
@@ -100,6 +103,7 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
  	.routes = mmsys_mt8183_routing_table,
  	.num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
  	.sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
+	.num_resets = 32,
  };
static const struct mtk_mmsys_match_data mt8183_mmsys_match_data = {
@@ -114,6 +118,7 @@ static const struct mtk_mmsys_driver_data mt8186_mmsys_driver_data = {
  	.routes = mmsys_mt8186_routing_table,
  	.num_routes = ARRAY_SIZE(mmsys_mt8186_routing_table),
  	.sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
+	.num_resets = 32,
  };
static const struct mtk_mmsys_match_data mt8186_mmsys_match_data = {
@@ -128,6 +133,7 @@ static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data = {
  	.routes = mmsys_mt8192_routing_table,
  	.num_routes = ARRAY_SIZE(mmsys_mt8192_routing_table),
  	.sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
+	.num_resets = 32,

You didn't reply to Nicolas regarding the reset numbers. I actually agree with him that we will need the num_resets declared for all devices. Why do you think this is not the case?

Regards,
Matthias


  };
static const struct mtk_mmsys_match_data mt8192_mmsys_match_data = {
@@ -288,13 +294,19 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
  {
  	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
  	unsigned long flags;
+	u32 offset;
+	u32 reg;
+
+	offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32);
+	id = id % MMSYS_SW_RESET_PER_REG;
+	reg = mmsys->data->sw0_rst_offset + offset;
spin_lock_irqsave(&mmsys->lock, flags); if (assert)
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0, NULL);
+		mtk_mmsys_update_bits(mmsys, reg, BIT(id), 0, NULL);
  	else
-		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id), NULL);
+		mtk_mmsys_update_bits(mmsys, reg, BIT(id), BIT(id), NULL);
spin_unlock_irqrestore(&mmsys->lock, flags); @@ -351,18 +363,6 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
  		return ret;
  	}
- spin_lock_init(&mmsys->lock);
-
-	mmsys->rcdev.owner = THIS_MODULE;
-	mmsys->rcdev.nr_resets = 32;
-	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
-	mmsys->rcdev.of_node = pdev->dev.of_node;
-	ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
-	if (ret) {
-		dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
-		return ret;
-	}
-
  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  	if (!res) {
  		dev_err(dev, "Couldn't get mmsys resource\n");
@@ -384,6 +384,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
  		mmsys->data = match_data->drv_data[0];
  	}
+ spin_lock_init(&mmsys->lock);
+
+	mmsys->rcdev.owner = THIS_MODULE;
+	mmsys->rcdev.nr_resets = mmsys->data->num_resets;
+	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
+	mmsys->rcdev.of_node = pdev->dev.of_node;
+	ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
+		return ret;
+	}
+
  #if IS_REACHABLE(CONFIG_MTK_CMDQ)
  	ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
  	if (ret)
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index f01ba206481d..20a271b80b3b 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -92,6 +92,7 @@ struct mtk_mmsys_driver_data {
  	const struct mtk_mmsys_routes *routes;
  	const unsigned int num_routes;
  	const u16 sw0_rst_offset;
+	const u32 num_resets;
  };
struct mtk_mmsys_match_data {



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux