Hi Tomi, Thank you for the patch. On Mon, Aug 22, 2022 at 05:34:01PM +0300, Tomi Valkeinen wrote: > From: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx> > > rcar_mipi_dsi_startup() writes correct values to VCLKSET, but as it uses > or-operation to add the new values to the current value in the register, > it should first make sure the fields are cleared. > > Do this by using rcar_mipi_dsi_write() to write the VCLKSET_CKEN bit to > VCLKSET before the rest of the VCLKSET configuration. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@xxxxxxxxxxxxxxxx> > --- > drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c | 7 ++++--- > 1 file changed, 4 insertions(+), 3 deletions(-) > > diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > index 06250f2f3499..b60a6d4a5d46 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c > @@ -412,9 +412,10 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, > return ret; > } > > - /* Enable DOT clock */ > - vclkset = VCLKSET_CKEN; > - rcar_mipi_dsi_set(dsi, VCLKSET, vclkset); > + /* Clear VCLKSET and enable DOT clock */ > + rcar_mipi_dsi_write(dsi, VCLKSET, VCLKSET_CKEN); > + > + vclkset = 0; > > if (dsi_format == 24) > vclkset |= VCLKSET_BPP_24; You can replace one more set() with a write(): diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c index 06250f2f3499..2744ea23e6f6 100644 --- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c +++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c @@ -414,7 +414,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, /* Enable DOT clock */ vclkset = VCLKSET_CKEN; - rcar_mipi_dsi_set(dsi, VCLKSET, vclkset); + rcar_mipi_dsi_write(dsi, VCLKSET, vclkset); if (dsi_format == 24) vclkset |= VCLKSET_BPP_24; @@ -429,7 +429,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi, vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div) | VCLKSET_LANE(dsi->lanes - 1); - rcar_mipi_dsi_set(dsi, VCLKSET, vclkset); + rcar_mipi_dsi_write(dsi, VCLKSET, vclkset); /* After setting VCLKSET register, enable VCLKEN */ rcar_mipi_dsi_set(dsi, VCLKEN, VCLKEN_CKEN); I'll apply patches 1/5 to 4/5 to my tree already. -- Regards, Laurent Pinchart