Re: [PATCH v2 4/7] regulator: core: Allow specifying an initial load w/ the bulk API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Douglas

On Wed, 17 Aug 2022 at 22:26, Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Tue, Aug 16, 2022 at 5:58 AM Yongqin Liu <yongqin.liu@xxxxxxxxxx> wrote:
> >
> > HI, Douglas
> >
> > With this change, I get one kernel panic with my hikey960
> > android-mainline based Android build,
> > if it's reverted, then the build could boot to the home screen successfully.
> > From the log information I shared here, not sure if you have any idea
> > what I could do to have the hikey960
> > build work with this change,
> >
> > The kernel panic is something like this, for details, please check the
> > log here: http://ix.io/47Lq
> >
> > [   10.738042][  T193] adv7511 1-0039: error 0000000000000000: Failed
> > to get supply 'v1p2'
> > [   10.748457][  T194] apexd: Found pre-installed APEX
> > /system/apex/com.android.os.statsd.apex
> > [   10.752908][   T67] Unable to handle kernel read from unreadable
> > memory at virtual address 000000000000004c
> > [   10.753116][    T8] Unable to handle kernel read from unreadable
> > memory at virtual address 0000000000000078
> > [   10.753130][    T8] Mem abort info:
> > [   10.753135][    T8]   ESR = 0x0000000096000005
> > [   10.753142][    T8]   EC = 0x25: DABT (current EL), IL = 32 bits
> > [   10.753152][    T8]   SET = 0, FnV = 0
> > [   10.753159][    T8]   EA = 0, S1PTW = 0
> > [   10.753166][    T8]   FSC = 0x05: level 1 translation fault
> > [   10.753174][    T8] Data abort info:
> > [   10.753179][    T8]   ISV = 0, ISS = 0x00000005
> > [   10.753184][    T8]   CM = 0, WnR = 0
> > [   10.753192][    T8] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000003098000
> > [   10.753204][    T8] [0000000000000078] pgd=0000000000000000,
> > p4d=0000000000000000, pud=0000000000000000
> > [   10.753232][    T8] Internal error: Oops: 96000005 [#1] PREEMPT SMP
> > [   10.753245][    T8] Modules linked in: adv7511(E+) tcpci_rt1711h(E)
> > hci_uart(E) btqca(E) btbcm(E) cpufreq_dt(E) hi3660_i2s(E)
> > hisi_hikey_usb(E) hi6421_pmic_core(E) syscon_reboot_mode(E)
> > reboot_mode(E) hi3660_mailbox(E) dw_mmc_k3(E) hisi_thermal(E)
> > dw_mmc_pltfm(E) dw_mmc(E) kirin_drm(E) snd_soc_simple_card(E)
> > snd_soc_simple_card_utils(E) spi_pl022(E) kirin_dsi(E)
> > phy_hi3660_usb3(E) i2c_designware_platform(E) drm_cma_helper(E)
> > i2c_designware_core(E) mali_kbase(OE) k3dma(E) cma_heap(E)
> > system_heap(E)
> > [   10.753436][    T8] CPU: 2 PID: 8 Comm: kworker/u16:0 Tainted: G
> >        OE      5.19.0-mainline-03487-g86d047950300-dirty #1
> > [   10.753454][    T8] Hardware name: HiKey960 (DT)
> > [   10.753463][    T8] Workqueue: events_unbound async_run_entry_fn
> > [   10.753497][    T8] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT
> > -SSBS BTYPE=--)
> > [   10.753516][    T8] pc : regulator_bulk_enable_async+0x3c/0x98
> > [   10.753540][    T8] lr : async_run_entry_fn+0x30/0xf8
> > [   10.753559][    T8] sp : ffffffc009ed3d20
> > [   10.753567][    T8] x29: ffffffc009ed3d40 x28: 0000000000000402
> > x27: ffffff801ad99828
> > [   10.753592][    T8] x26: ffffff803217b010 x25: 0000000000000002
> > x24: ffffff8003385da8
> > [   10.753617][    T8] x23: ffffff8003385da0 x22: ffffff801ad94805
> > x21: ffffff8003385da0
> > [   10.753642][    T8] x20: 0000000000000000 x19: ffffff8003143d20
> > x18: ffffffc008075028
> > [   10.753667][    T8] x17: 000000040044ffff x16: 0000000000000001
> > x15: 0000000000000010
> > [   10.753691][    T8] x14: 0000000000000000 x13: 0000000000000f58
> > x12: 0000000082355555
> > [   10.753715][    T8] x11: 00006acfbfa2f400 x10: 0000000000000016 x9
> > : 00ffffffffffffff
> > [   10.753740][    T8] x8 : da9ecda1b63b0500 x7 : 0000000000008080 x6
> > : 0000000000000000
> > [   10.753764][    T8] x5 : 0000000000000001 x4 : 0000646e756f626e x3
> > : ffffff801ad99828
> > [   10.753788][    T8] x2 : ffffff8003385da8 x1 : ffffffc009ed3d20 x0
> > : ffffff8003143d20
> > [   10.753812][    T8] Call trace:
> > [   10.753818][    T8]  regulator_bulk_enable_async+0x3c/0x98
> > [   10.753839][    T8]  async_run_entry_fn+0x30/0xf8
> > [   10.753859][    T8]  process_one_work+0x1d0/0x404
> > [   10.753879][    T8]  worker_thread+0x25c/0x43c
> > [   10.753897][    T8]  kthread+0xf0/0x2c0
> > [   10.753912][    T8]  ret_from_fork+0x10/0x20
> > [   10.753940][    T8] Code: f81f83a8 f9400814 a900ffff f90003ff (f9403e95)
> > [   10.753950][    T8] ---[ end trace 0000000000000000 ]---
> > [   10.760621][  T194] apexd: Found pre-installed APEX
> > /system/apex/com.android.permission.capex
> > [   10.767672][   T67] Mem abort info:
> > [   10.779658][  T194] apexd: Found pre-installed APEX
> > /system/apex/com.android.art.capex
> > [   10.783690][   T67]   ESR = 0x0000000096000005
> > [   10.792424][  T194] apexd: Found pre-installed APEX
> > /system/apex/com.android.scheduling.capex
> > [   10.794713][    T8] Kernel panic - not syncing: Oops: Fatal exception
> > [   10.794723][    T8] SMP: stopping secondary CPUs
> > [   10.798141][    T8] Kernel Offset: 0x70000 from 0xffffffc008000000
> > [   10.798150][    T8] PHYS_OFFSET: 0x0
> > [   10.798156][    T8] CPU features: 0x0000,00649020,00001086
> > [   10.798167][    T8] Memory Limit: none
>
> Are you fixed by the patch ("regulator: core: Fix missing error return
> from regulator_bulk_get()") [1]
>
> [1] https://lore.kernel.org/r/20220809142738.1.I91625242f137c707bb345c51c80c5ecee02eeff3@changeid

Thanks for the check!
I tested the above patch with the android-mainline based kernel,
and it fixes the regulator_bulk_enable_async kernel panic reported here.

-- 
Best Regards,
Yongqin Liu
---------------------------------------------------------------
#mailing list
linaro-android@xxxxxxxxxxxxxxxx
http://lists.linaro.org/mailman/listinfo/linaro-android



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux