The dsi_phy_driver_probe() function has a "goto fail" for no reason. Change it to just always return directly when it sees an error. Make this simpler by leveraging dev_err_probe() which is designed to make code like this shorter / simpler. NOTE: as part of this, we now pass through error codes directly from msm_ioremap_size() rather than translating to -ENOMEM. This changed mostly because it's much more convenient when using dev_err_probe() and also it's usually encouraged not to hide error codes like the old code was doing unless there is a good reason. I can't see any reason why we'd need to return -ENOMEM instead of -EINVAL from the probe function. Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> Reviewed-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> --- Changes in v4: - Mention error code change in commit message. Changes in v3: - ("Improve dsi_phy_driver_probe() probe error handling") new for v3. drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 74 ++++++++++----------------- 1 file changed, 27 insertions(+), 47 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index 0a00f9b73fc5..57cd525de7a1 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -621,12 +621,9 @@ static int dsi_phy_driver_probe(struct platform_device *pdev) phy->pdev = pdev; phy->id = dsi_phy_get_id(phy); - if (phy->id < 0) { - ret = phy->id; - DRM_DEV_ERROR(dev, "%s: couldn't identify PHY index, %d\n", - __func__, ret); - goto fail; - } + if (phy->id < 0) + return dev_err_probe(dev, phy->id, + "Couldn't identify PHY index\n"); phy->regulator_ldo_mode = of_property_read_bool(dev->of_node, "qcom,dsi-phy-regulator-ldo-mode"); @@ -634,88 +631,71 @@ static int dsi_phy_driver_probe(struct platform_device *pdev) phy->cphy_mode = (phy_type == PHY_TYPE_CPHY); phy->base = msm_ioremap_size(pdev, "dsi_phy", &phy->base_size); - if (IS_ERR(phy->base)) { - DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__); - ret = -ENOMEM; - goto fail; - } + if (IS_ERR(phy->base)) + return dev_err_probe(dev, PTR_ERR(phy->base), + "Failed to map phy base\n"); phy->pll_base = msm_ioremap_size(pdev, "dsi_pll", &phy->pll_size); - if (IS_ERR(phy->pll_base)) { - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__); - ret = -ENOMEM; - goto fail; - } + if (IS_ERR(phy->pll_base)) + return dev_err_probe(dev, PTR_ERR(phy->pll_base), + "Failed to map pll base\n"); if (phy->cfg->has_phy_lane) { phy->lane_base = msm_ioremap_size(pdev, "dsi_phy_lane", &phy->lane_size); - if (IS_ERR(phy->lane_base)) { - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy lane base\n", __func__); - ret = -ENOMEM; - goto fail; - } + if (IS_ERR(phy->lane_base)) + return dev_err_probe(dev, PTR_ERR(phy->lane_base), + "Failed to map phy lane base\n"); } if (phy->cfg->has_phy_regulator) { phy->reg_base = msm_ioremap_size(pdev, "dsi_phy_regulator", &phy->reg_size); - if (IS_ERR(phy->reg_base)) { - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy regulator base\n", __func__); - ret = -ENOMEM; - goto fail; - } + if (IS_ERR(phy->reg_base)) + return dev_err_probe(dev, PTR_ERR(phy->reg_base), + "Failed to map phy regulator base\n"); } if (phy->cfg->ops.parse_dt_properties) { ret = phy->cfg->ops.parse_dt_properties(phy); if (ret) - goto fail; + return ret; } ret = devm_regulator_bulk_get_const(dev, phy->cfg->num_regulators, phy->cfg->regulator_data, &phy->supplies); if (ret) - goto fail; + return ret; phy->ahb_clk = msm_clk_get(pdev, "iface"); - if (IS_ERR(phy->ahb_clk)) { - DRM_DEV_ERROR(dev, "%s: Unable to get ahb clk\n", __func__); - ret = PTR_ERR(phy->ahb_clk); - goto fail; - } + if (IS_ERR(phy->ahb_clk)) + return dev_err_probe(dev, PTR_ERR(phy->ahb_clk), + "Unable to get ahb clk\n"); /* PLL init will call into clk_register which requires * register access, so we need to enable power and ahb clock. */ ret = dsi_phy_enable_resource(phy); if (ret) - goto fail; + return ret; if (phy->cfg->ops.pll_init) { ret = phy->cfg->ops.pll_init(phy); - if (ret) { - DRM_DEV_INFO(dev, - "%s: pll init failed: %d, need separate pll clk driver\n", - __func__, ret); - goto fail; - } + if (ret) + return dev_err_probe(dev, ret, + "PLL init failed; need separate clk driver\n"); } ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, phy->provided_clocks); - if (ret) { - DRM_DEV_ERROR(dev, "%s: failed to register clk provider: %d\n", __func__, ret); - goto fail; - } + if (ret) + return dev_err_probe(dev, ret, + "Failed to register clk provider\n"); dsi_phy_disable_resource(phy); platform_set_drvdata(pdev, phy); return 0; - -fail: - return ret; } static struct platform_driver dsi_phy_platform_driver = { -- 2.37.1.455.g008518b4e5-goog