Hi Adam, sorry for the delay. On 22-08-02, Adam Ford wrote: ... > > > I think that the most important one is the blanking calc. Can you try to > > > revert "drm/bridge: adv7511: Repair bus_flags and bus_format" and check > > > if you can get a output still? Also something to try would be to disable > > > the internal timing generator by specifying > > > 'adi,disable-timing-generator'. Also if you have an oscilloscope for > > I did some reading about the internal timing generator. It appears > that it's required when video formats use fractional bytes, and it's > preconfigured to run at 720p by default, but registers 28h through 37h > configure it for other video modes. I thought this timing generator can detect the sync timing automatically. Also I saw some mail discussions where this timing generator can trigger missbehaviours. Since we send the sync packages from the dsi-host to the ADV, I think it should be possible for the ADV to reconstruct the sync signals without the need of the internal timing generator. > Are you thinking the imx8mm DSI generator would do it better? You mean the porches we are sending? Regards, Marco