Re: [PATCH 0/5] clk/qcom: Support gdsc collapse polling using 'reset' inteface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 2, 2022 at 12:02 AM Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On 30/07/2022 12:17, Akhil P Oommen wrote:
> >
> > Some clients like adreno gpu driver would like to ensure that its gdsc
> > is collapsed at hardware during a gpu reset sequence. This is because it
> > has a votable gdsc which could be ON due to a vote from another subsystem
> > like tz, hyp etc or due to an internal hardware signal.
>
> If this is votable, do we have any guarantee that the gdsc will collapse
> at all? How can we proceed if it did not collapse?

Other potential votes should be transient.  But I guess we eventually
need to timeout and give up.  At which point we are no worse off than
before.

But hmm, we aren't using RBBM_SW_RESET_CMD for sw reset like we have
on previous generations?  That does seem a bit odd.  Looks like kgsl
does use it.

BR,
-R

> > To allow
> > this, gpucc driver can expose an interface to the client driver using
> > reset framework. Using this the client driver can trigger a polling within
> > the gdsc driver.
>
> Trigger the polling made me think initially that we will actually
> trigger something in the HW. Instead the client uses reset framework to
> poll for the gdsc to be reset.
>
> >
> > This series is rebased on top of linus's master branch.
> >
> > Related discussion: https://patchwork.freedesktop.org/patch/493144/
> >
> >
> > Akhil P Oommen (5):
> >    dt-bindings: clk: qcom: Support gpu cx gdsc reset
> >    clk: qcom: Allow custom reset ops
> >    clk: qcom: gpucc-sc7280: Add cx collapse reset support
> >    clk: qcom: gdsc: Add a reset op to poll gdsc collapse
> >    arm64: dts: qcom: sc7280: Add Reset support for gpu
> >
> >   arch/arm64/boot/dts/qcom/sc7280.dtsi          |  3 +++
> >   drivers/clk/qcom/gdsc.c                       | 23 +++++++++++++++++++----
> >   drivers/clk/qcom/gdsc.h                       |  7 +++++++
> >   drivers/clk/qcom/gpucc-sc7280.c               |  6 ++++++
> >   drivers/clk/qcom/reset.c                      |  6 ++++++
> >   drivers/clk/qcom/reset.h                      |  2 ++
> >   include/dt-bindings/clock/qcom,gpucc-sc7280.h |  3 +++
> >   7 files changed, 46 insertions(+), 4 deletions(-)
> >
>
>
> --
> With best wishes
> Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux