Add early console support for generic linear framebuffer devices. This driver supports probing from cmdline early parameters or from the device-tree using information in simple-framebuffer node. The EFI functionality should be retained in whole. The driver was disabled on ARM because of a bug in early_ioremap implementation on ARM. Signed-off-by: Markuss Broks <markuss.broks@xxxxxxxxx> --- .../admin-guide/kernel-parameters.txt | 12 +- MAINTAINERS | 5 + drivers/firmware/efi/Kconfig | 6 +- drivers/firmware/efi/Makefile | 1 - drivers/firmware/efi/earlycon.c | 246 -------------- drivers/video/fbdev/Kconfig | 11 + drivers/video/fbdev/Makefile | 1 + drivers/video/fbdev/earlycon.c | 301 ++++++++++++++++++ 8 files changed, 327 insertions(+), 256 deletions(-) delete mode 100644 drivers/firmware/efi/earlycon.c create mode 100644 drivers/video/fbdev/earlycon.c diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 8090130b544b0701237a7b657a29c83c000a60f4..22a8625bb342f95e731fcc3a24390fca2c0f194c 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1281,12 +1281,9 @@ specified address. The serial port must already be setup and configured. Options are not yet supported. - efifb,[options] + efifb Start an early, unaccelerated console on the EFI - memory mapped framebuffer (if available). On cache - coherent non-x86 systems that use system memory for - the framebuffer, pass the 'ram' option so that it is - mapped with the correct attributes. + memory mapped framebuffer (if available). linflex,<addr> Use early console provided by Freescale LINFlexD UART @@ -1294,6 +1291,11 @@ address must be provided, and the serial port must already be setup and configured. + simplefb,<addr>,<width>,<height>,<bpp> + Use early console with simple framebuffer that is + pre-initialized by firmware. A valid base address, + width, height and pixel size must be provided. + earlyprintk= [X86,SH,ARM,M68k,S390] earlyprintk=vga earlyprintk=sclp diff --git a/MAINTAINERS b/MAINTAINERS index 1fc9ead83d2aa3e60ccc4cfa8ee16df09ef579bf..140dee7f6920197a895d310afdde67a0de474522 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7033,6 +7033,11 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/ T: git git://linuxtv.org/anttip/media_tree.git F: drivers/media/tuners/e4000* +EARLY CONSOLE FRAMEBUFFER DRIVER +M: Markuss Broks <markuss.broks@xxxxxxxxx> +S: Maintained +F: drivers/video/fbdev/earlycon.c + EARTH_PT1 MEDIA DRIVER M: Akihiro Tsukada <tskd08@xxxxxxxxx> L: linux-media@xxxxxxxxxxxxxxx diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig index 7aa4717cdcac46f91dd202f868c463388eb02735..56241b2e19383d70387f07114a27bb4f33ac7857 100644 --- a/drivers/firmware/efi/Kconfig +++ b/drivers/firmware/efi/Kconfig @@ -259,10 +259,8 @@ config EFI_DISABLE_PCI_DMA may be used to override this option. config EFI_EARLYCON - def_bool y - depends on SERIAL_EARLYCON && !ARM && !IA64 - select FONT_SUPPORT - select ARCH_USE_MEMREMAP_PROT + bool "EFI early console support" + depends on FB_EARLYCON && !IA64 config EFI_CUSTOM_SSDT_OVERLAYS bool "Load custom ACPI SSDT overlay from an EFI variable" diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile index c02ff25dd47707090a2ab86ee4f330e467f878f5..64eea61fbb43d76ec2d5416d467dfbb9aa21bda0 100644 --- a/drivers/firmware/efi/Makefile +++ b/drivers/firmware/efi/Makefile @@ -44,6 +44,5 @@ obj-$(CONFIG_ARM64) += $(arm-obj-y) riscv-obj-$(CONFIG_EFI) := efi-init.o riscv-runtime.o obj-$(CONFIG_RISCV) += $(riscv-obj-y) obj-$(CONFIG_EFI_CAPSULE_LOADER) += capsule-loader.o -obj-$(CONFIG_EFI_EARLYCON) += earlycon.o obj-$(CONFIG_UEFI_CPER_ARM) += cper-arm.o obj-$(CONFIG_UEFI_CPER_X86) += cper-x86.o diff --git a/drivers/firmware/efi/earlycon.c b/drivers/firmware/efi/earlycon.c deleted file mode 100644 index a52236e11e5f73ddea5bb1f42ca2ca7c42425dab..0000000000000000000000000000000000000000 --- a/drivers/firmware/efi/earlycon.c +++ /dev/null @@ -1,246 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2013 Intel Corporation; author Matt Fleming - */ - -#include <linux/console.h> -#include <linux/efi.h> -#include <linux/font.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/serial_core.h> -#include <linux/screen_info.h> - -#include <asm/early_ioremap.h> - -static const struct console *earlycon_console __initdata; -static const struct font_desc *font; -static u32 efi_x, efi_y; -static u64 fb_base; -static bool fb_wb; -static void *efi_fb; - -/* - * EFI earlycon needs to use early_memremap() to map the framebuffer. - * But early_memremap() is not usable for 'earlycon=efifb keep_bootcon', - * memremap() should be used instead. memremap() will be available after - * paging_init() which is earlier than initcall callbacks. Thus adding this - * early initcall function early_efi_map_fb() to map the whole EFI framebuffer. - */ -static int __init efi_earlycon_remap_fb(void) -{ - /* bail if there is no bootconsole or it has been disabled already */ - if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED)) - return 0; - - efi_fb = memremap(fb_base, screen_info.lfb_size, - fb_wb ? MEMREMAP_WB : MEMREMAP_WC); - - return efi_fb ? 0 : -ENOMEM; -} -early_initcall(efi_earlycon_remap_fb); - -static int __init efi_earlycon_unmap_fb(void) -{ - /* unmap the bootconsole fb unless keep_bootcon has left it enabled */ - if (efi_fb && !(earlycon_console->flags & CON_ENABLED)) - memunmap(efi_fb); - return 0; -} -late_initcall(efi_earlycon_unmap_fb); - -static __ref void *efi_earlycon_map(unsigned long start, unsigned long len) -{ - pgprot_t fb_prot; - - if (efi_fb) - return efi_fb + start; - - fb_prot = fb_wb ? PAGE_KERNEL : pgprot_writecombine(PAGE_KERNEL); - return early_memremap_prot(fb_base + start, len, pgprot_val(fb_prot)); -} - -static __ref void efi_earlycon_unmap(void *addr, unsigned long len) -{ - if (efi_fb) - return; - - early_memunmap(addr, len); -} - -static void efi_earlycon_clear_scanline(unsigned int y) -{ - unsigned long *dst; - u16 len; - - len = screen_info.lfb_linelength; - dst = efi_earlycon_map(y*len, len); - if (!dst) - return; - - memset(dst, 0, len); - efi_earlycon_unmap(dst, len); -} - -static void efi_earlycon_scroll_up(void) -{ - unsigned long *dst, *src; - u16 len; - u32 i, height; - - len = screen_info.lfb_linelength; - height = screen_info.lfb_height; - - for (i = 0; i < height - font->height; i++) { - dst = efi_earlycon_map(i*len, len); - if (!dst) - return; - - src = efi_earlycon_map((i + font->height) * len, len); - if (!src) { - efi_earlycon_unmap(dst, len); - return; - } - - memmove(dst, src, len); - - efi_earlycon_unmap(src, len); - efi_earlycon_unmap(dst, len); - } -} - -static void efi_earlycon_write_char(u32 *dst, unsigned char c, unsigned int h) -{ - const u32 color_black = 0x00000000; - const u32 color_white = 0x00ffffff; - const u8 *src; - int m, n, bytes; - u8 x; - - bytes = BITS_TO_BYTES(font->width); - src = font->data + c * font->height * bytes + h * bytes; - - for (m = 0; m < font->width; m++) { - n = m % 8; - x = *(src + m / 8); - if ((x >> (7 - n)) & 1) - *dst = color_white; - else - *dst = color_black; - dst++; - } -} - -static void -efi_earlycon_write(struct console *con, const char *str, unsigned int num) -{ - struct screen_info *si; - unsigned int len; - const char *s; - void *dst; - - si = &screen_info; - len = si->lfb_linelength; - - while (num) { - unsigned int linemax; - unsigned int h, count = 0; - - for (s = str; *s && *s != '\n'; s++) { - if (count == num) - break; - count++; - } - - linemax = (si->lfb_width - efi_x) / font->width; - if (count > linemax) - count = linemax; - - for (h = 0; h < font->height; h++) { - unsigned int n, x; - - dst = efi_earlycon_map((efi_y + h) * len, len); - if (!dst) - return; - - s = str; - n = count; - x = efi_x; - - while (n-- > 0) { - efi_earlycon_write_char(dst + x*4, *s, h); - x += font->width; - s++; - } - - efi_earlycon_unmap(dst, len); - } - - num -= count; - efi_x += count * font->width; - str += count; - - if (num > 0 && *s == '\n') { - efi_x = 0; - efi_y += font->height; - str++; - num--; - } - - if (efi_x + font->width > si->lfb_width) { - efi_x = 0; - efi_y += font->height; - } - - if (efi_y + font->height > si->lfb_height) { - u32 i; - - efi_y -= font->height; - efi_earlycon_scroll_up(); - - for (i = 0; i < font->height; i++) - efi_earlycon_clear_scanline(efi_y + i); - } - } -} - -static int __init efi_earlycon_setup(struct earlycon_device *device, - const char *opt) -{ - struct screen_info *si; - u16 xres, yres; - u32 i; - - if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI) - return -ENODEV; - - fb_base = screen_info.lfb_base; - if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE) - fb_base |= (u64)screen_info.ext_lfb_base << 32; - - fb_wb = opt && !strcmp(opt, "ram"); - - si = &screen_info; - xres = si->lfb_width; - yres = si->lfb_height; - - /* - * efi_earlycon_write_char() implicitly assumes a framebuffer with - * 32 bits per pixel. - */ - if (si->lfb_depth != 32) - return -ENODEV; - - font = get_default_font(xres, yres, -1, -1); - if (!font) - return -ENODEV; - - efi_y = rounddown(yres, font->height) - font->height; - for (i = 0; i < (yres - efi_y) / font->height; i++) - efi_earlycon_scroll_up(); - - device->con->write = efi_earlycon_write; - earlycon_console = device->con; - return 0; -} -EARLYCON_DECLARE(efifb, efi_earlycon_setup); diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index f2a6b81e45c41334db71cca35f4fa5a827f728fe..2bb3f7a9e6e0f8ad2e9042d8c602b1cdec30755c 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -627,6 +627,17 @@ config FB_VESA You will get a boot time penguin logo at no additional cost. Please read <file:Documentation/fb/vesafb.rst>. If unsure, say Y. +config FB_EARLYCON + bool "Generic framebuffer early console" + depends on FB && SERIAL_EARLYCON && !ARM + select FONT_SUPPORT + select ARCH_USE_MEMREMAP_PROT + help + Say Y here if you want early console support for firmware established + linear framebuffer. Unless you are using EFI framebuffer, you need to + specify framebuffer geometry and address in device-tree or in kernel + command line. + config FB_EFI bool "EFI-based Framebuffer Support" depends on (FB = y) && !IA64 && EFI diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile index 7795c4126706fd7bb832d94da5d14b0060849d1f..07406ab45a3f306a07d008a9f0a401347aeaa695 100644 --- a/drivers/video/fbdev/Makefile +++ b/drivers/video/fbdev/Makefile @@ -129,6 +129,7 @@ obj-$(CONFIG_FB_MX3) += mx3fb.o obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o obj-$(CONFIG_FB_SSD1307) += ssd1307fb.o obj-$(CONFIG_FB_SIMPLE) += simplefb.o +obj-$(CONFIG_FB_EARLYCON) += earlycon.o # the test framebuffer is last obj-$(CONFIG_FB_VIRTUAL) += vfb.o diff --git a/drivers/video/fbdev/earlycon.c b/drivers/video/fbdev/earlycon.c new file mode 100644 index 0000000000000000000000000000000000000000..5f6f4b228a50f23c1c77cf7ba5d50ff833efdd46 --- /dev/null +++ b/drivers/video/fbdev/earlycon.c @@ -0,0 +1,301 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2013 Intel Corporation; author Matt Fleming + * Copyright (C) 2022 Markuss Broks <markuss.broks@xxxxxxxxx> + */ + +#include <asm/early_ioremap.h> +#include <linux/console.h> +#include <linux/efi.h> +#include <linux/font.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/serial_core.h> +#include <linux/screen_info.h> + +struct fb_earlycon { + u32 x, y, curr_x, curr_y, depth, stride; + size_t size; + phys_addr_t phys_base; + void __iomem *virt_base; +}; + +static const struct console *earlycon_console __initconst; +static struct fb_earlycon info; +static const struct font_desc *font; + +static int __init simplefb_earlycon_remap_fb(void) +{ + int is_ram; + /* bail if there is no bootconsole or it has been disabled already */ + if (!earlycon_console || !(earlycon_console->flags & CON_ENABLED)) + return 0; + + is_ram = region_intersects(info.phys_base, info.size, + IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE); + is_ram = is_ram == REGION_INTERSECTS; + + info.virt_base = memremap(info.phys_base, info.size, + is_ram ? MEMREMAP_WB : MEMREMAP_WC); + + return info.virt_base ? 0 : -ENOMEM; +} +early_initcall(simplefb_earlycon_remap_fb); + +static int __init simplefb_earlycon_unmap_fb(void) +{ + /* unmap the bootconsole fb unless keep_bootcon has left it enabled */ + if (info.virt_base && !(earlycon_console->flags & CON_ENABLED)) + memunmap(info.virt_base); + return 0; +} +late_initcall(simplefb_earlycon_unmap_fb); + +static __ref void *simplefb_earlycon_map(unsigned long start, unsigned long len) +{ + pgprot_t fb_prot; + + if (info.virt_base) + return info.virt_base + start; + + fb_prot = PAGE_KERNEL; + return early_memremap_prot(info.phys_base + start, len, pgprot_val(fb_prot)); +} + +static __ref void simplefb_earlycon_unmap(void *addr, unsigned long len) +{ + if (info.virt_base) + return; + + early_memunmap(addr, len); +} + +static void simplefb_earlycon_clear_scanline(unsigned int y) +{ + unsigned long *dst; + u16 len; + + len = info.stride; + dst = simplefb_earlycon_map(y * len, len); + if (!dst) + return; + + memset(dst, 0, len); + simplefb_earlycon_unmap(dst, len); +} + +static void simplefb_earlycon_scroll_up(void) +{ + unsigned long *dst, *src; + u16 len; + u32 i, height; + + len = info.stride; + height = info.y; + + for (i = 0; i < height - font->height; i++) { + dst = simplefb_earlycon_map(i * len, len); + if (!dst) + return; + + src = simplefb_earlycon_map((i + font->height) * len, len); + if (!src) { + simplefb_earlycon_unmap(dst, len); + return; + } + + memmove(dst, src, len); + + simplefb_earlycon_unmap(src, len); + simplefb_earlycon_unmap(dst, len); + } +} + +static void simplefb_earlycon_write_char(u8 *dst, unsigned char c, unsigned int h) +{ + const u8 *src; + int m, n, bytes; + u8 x; + + bytes = BITS_TO_BYTES(font->width); + src = font->data + c * font->height * bytes + h * bytes; + + for (m = 0; m < font->width; m++) { + n = m % 8; + x = *(src + m / 8); + if ((x >> (7 - n)) & 1) + memset(dst, 0xff, (info.depth / 8)); + else + memset(dst, 0, (info.depth / 8)); + dst += (info.depth / 8); + } +} + +static void +simplefb_earlycon_write(struct console *con, const char *str, unsigned int num) +{ + unsigned int len; + const char *s; + void *dst; + + len = info.stride; + + while (num) { + unsigned int linemax; + unsigned int h, count = 0; + + for (s = str; *s && *s != '\n'; s++) { + if (count == num) + break; + count++; + } + + linemax = (info.x - info.curr_x) / font->width; + if (count > linemax) + count = linemax; + + for (h = 0; h < font->height; h++) { + unsigned int n, x; + + dst = simplefb_earlycon_map((info.curr_y + h) * len, len); + if (!dst) + return; + + s = str; + n = count; + x = info.curr_x; + + while (n-- > 0) { + simplefb_earlycon_write_char(dst + (x * 4), *s, h); + x += font->width; + s++; + } + + simplefb_earlycon_unmap(dst, len); + } + + num -= count; + info.curr_x += count * font->width; + str += count; + + if (num > 0 && *s == '\n') { + info.curr_x = 0; + info.curr_y += font->height; + str++; + num--; + } + + if (info.curr_x + font->width > info.x) { + info.curr_x = 0; + info.curr_y += font->height; + } + + if (info.curr_y + font->height > info.y) { + u32 i; + + info.curr_y -= font->height; + simplefb_earlycon_scroll_up(); + + for (i = 0; i < font->height; i++) + simplefb_earlycon_clear_scanline(info.curr_y + i); + } + } +} + +static int __init simplefb_earlycon_setup_common(struct earlycon_device *device, + const char *opt) +{ + int i; + + info.stride = info.x * 4; + info.size = info.x * info.y * (info.depth / 8); + + font = get_default_font(info.x, info.y, -1, -1); + if (!font) + return -ENODEV; + + info.curr_y = rounddown(info.y, font->height) - font->height; + for (i = 0; i < (info.y - info.curr_y) / font->height; i++) + simplefb_earlycon_scroll_up(); + + device->con->write = simplefb_earlycon_write; + earlycon_console = device->con; + return 0; +} + +static int __init simplefb_earlycon_setup(struct earlycon_device *device, + const char *opt) +{ + struct uart_port *port = &device->port; + int ret; + + if (!port->mapbase) + return -ENODEV; + + info.phys_base = port->mapbase; + + ret = sscanf(device->options, "%u,%u,%u", &info.x, &info.y, &info.depth); + if (ret != 3) + return -ENODEV; + + return simplefb_earlycon_setup_common(device, opt); +} + +EARLYCON_DECLARE(simplefb, simplefb_earlycon_setup); + +#ifdef CONFIG_EFI_EARLYCON +static int __init simplefb_earlycon_setup_efi(struct earlycon_device *device, + const char *opt) +{ + if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI) + return -ENODEV; + + info.phys_base = screen_info.lfb_base; + if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE) + info.phys_base |= (u64)screen_info.ext_lfb_base << 32; + + info.x = screen_info.lfb_width; + info.y = screen_info.lfb_height; + info.depth = screen_info.lfb_depth; + + return simplefb_earlycon_setup_common(device, opt); +} + +EARLYCON_DECLARE(efifb, simplefb_earlycon_setup_efi); +#endif + +#ifdef CONFIG_OF_EARLY_FLATTREE +static int __init simplefb_earlycon_setup_of(struct earlycon_device *device, + const char *opt) +{ + struct uart_port *port = &device->port; + const __be32 *val; + + if (!port->mapbase) + return -ENODEV; + + info.phys_base = port->mapbase; + + val = of_get_flat_dt_prop(device->node, "width", NULL); + if (!val) + return -ENODEV; + info.x = be32_to_cpu(*val); + + val = of_get_flat_dt_prop(device->node, "height", NULL); + if (!val) + return -ENODEV; + info.y = be32_to_cpu(*val); + + val = of_get_flat_dt_prop(device->node, "stride", NULL); + if (!val) + return -ENODEV; + info.depth = (be32_to_cpu(*val) / info.x) * 8; + + return simplefb_earlycon_setup_common(device, opt); +} + +OF_EARLYCON_DECLARE(simplefb, "simple-framebuffer", simplefb_earlycon_setup_of); +#endif -- 2.37.0
