On 27/07/2022 06:50, Bo-Chen Chen wrote: > From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> > > This controller is present on several mediatek hardware. Currently > mt8195 and mt8395 have this controller without a functional difference, > so only one compatible field is added. > > The controller can have two forms, as a normal display port and as an > embedded display port. > > Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> > Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx> > --- > .../display/mediatek/mediatek,dp.yaml | 117 ++++++++++++++++++ > 1 file changed, 117 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml > new file mode 100644 > index 000000000000..fd68c6c08df3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml > @@ -0,0 +1,117 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek Display Port Controller > + > +maintainers: > + - Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx> > + - Jitao shi <jitao.shi@xxxxxxxxxxxx> > + > +description: | > + Device tree bindings for the MediaTek display port TX (DP) and > + embedded display port TX (eDP) controller present on some MediaTek SoCs. Drop entire sentence and just describe the hardware. > + We just need to enable the power domain of DP. The clock of DP is > + generated by itself and we are not using other PLL to generate clocks. > + MediaTek DP and eDP are different hardwares and there are some features > + which are not supported for eDP. For example, audio is not supported for > + eDP. Therefore, we need to use two different compatibles to describe them. > + > +properties: > + compatible: > + enum: > + - mediatek,mt8195-dp-tx > + - mediatek,mt8195-edp-tx > + > + reg: > + maxItems: 1 > + > + nvmem-cells: > + maxItems: 1 > + description: efuse data for display port calibration > + > + nvmem-cell-names: > + const: dp_calibration_data > + > + power-domains: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + properties: > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: Input endpoint of the controller, usually dp_intf > + > + port@1: > + $ref: /schemas/graph.yaml#/$defs/port-base > + unevaluatedProperties: false > + description: Output endpoint of the controller > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + properties: > + data-lanes: > + description: | > + number of lanes supported by the hardware. > + The possible values: > + 0 - For 1 lane enabled in IP. > + 0 1 - For 2 lanes enabled in IP. > + 0 1 2 3 - For 4 lanes enabled in IP. > + minItems: 1 > + maxItems: 4 > + required: > + - data-lanes > + > + required: > + - port@0 > + - port@1 > + > + max-linkrate-mhz: > + enum: [ 1620, 2700, 5400, 8100 ] > + description: maximum link rate supported by the hardware. > + > +required: > + - compatible > + - reg > + - interrupts > + - ports > + - max-linkrate-mhz > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/mt8195-power.h> > + dp_tx@1c600000 { No underscores in node names, so just "dp". Best regards, Krzysztof
