On 18/07/2022 18:24, Adrián Larumbe wrote: > Each Panfrost job has its own job slot and MMU address space set of > registers, which are selected with a job-specific index. > > Turn the shift and stride used for selection of the right register set base > into a define rather than using magic numbers. > > Signed-off-by: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx> > --- > drivers/gpu/drm/panfrost/panfrost_regs.h | 42 ++++++++++++++---------- > 1 file changed, 24 insertions(+), 18 deletions(-) > > diff --git a/drivers/gpu/drm/panfrost/panfrost_regs.h b/drivers/gpu/drm/panfrost/panfrost_regs.h > index accb4fa3adb8..3574c0513129 100644 > --- a/drivers/gpu/drm/panfrost/panfrost_regs.h > +++ b/drivers/gpu/drm/panfrost/panfrost_regs.h > @@ -226,23 +226,25 @@ > #define JOB_INT_MASK_DONE(j) BIT(j) > > #define JS_BASE 0x1800 > -#define JS_HEAD_LO(n) (JS_BASE + ((n) * 0x80) + 0x00) > -#define JS_HEAD_HI(n) (JS_BASE + ((n) * 0x80) + 0x04) > -#define JS_TAIL_LO(n) (JS_BASE + ((n) * 0x80) + 0x08) > -#define JS_TAIL_HI(n) (JS_BASE + ((n) * 0x80) + 0x0c) > -#define JS_AFFINITY_LO(n) (JS_BASE + ((n) * 0x80) + 0x10) > -#define JS_AFFINITY_HI(n) (JS_BASE + ((n) * 0x80) + 0x14) > -#define JS_CONFIG(n) (JS_BASE + ((n) * 0x80) + 0x18) > -#define JS_XAFFINITY(n) (JS_BASE + ((n) * 0x80) + 0x1c) > -#define JS_COMMAND(n) (JS_BASE + ((n) * 0x80) + 0x20) > -#define JS_STATUS(n) (JS_BASE + ((n) * 0x80) + 0x24) > -#define JS_HEAD_NEXT_LO(n) (JS_BASE + ((n) * 0x80) + 0x40) > -#define JS_HEAD_NEXT_HI(n) (JS_BASE + ((n) * 0x80) + 0x44) > -#define JS_AFFINITY_NEXT_LO(n) (JS_BASE + ((n) * 0x80) + 0x50) > -#define JS_AFFINITY_NEXT_HI(n) (JS_BASE + ((n) * 0x80) + 0x54) > -#define JS_CONFIG_NEXT(n) (JS_BASE + ((n) * 0x80) + 0x58) > -#define JS_COMMAND_NEXT(n) (JS_BASE + ((n) * 0x80) + 0x60) > -#define JS_FLUSH_ID_NEXT(n) (JS_BASE + ((n) * 0x80) + 0x70) > +#define JS_SLOT_STRIDE 0x80 > + > +#define JS_HEAD_LO(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x00) > +#define JS_HEAD_HI(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x04) > +#define JS_TAIL_LO(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x08) > +#define JS_TAIL_HI(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x0c) > +#define JS_AFFINITY_LO(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x10) > +#define JS_AFFINITY_HI(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x14) > +#define JS_CONFIG(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x18) > +#define JS_XAFFINITY(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x1c) > +#define JS_COMMAND(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x20) > +#define JS_STATUS(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x24) > +#define JS_HEAD_NEXT_LO(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x40) > +#define JS_HEAD_NEXT_HI(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x44) > +#define JS_AFFINITY_NEXT_LO(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x50) > +#define JS_AFFINITY_NEXT_HI(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x54) > +#define JS_CONFIG_NEXT(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x58) > +#define JS_COMMAND_NEXT(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x60) > +#define JS_FLUSH_ID_NEXT(n) (JS_BASE + ((n) * JS_SLOT_STRIDE) + 0x70) > > /* Possible values of JS_CONFIG and JS_CONFIG_NEXT registers */ > #define JS_CONFIG_START_FLUSH_CLEAN BIT(8) > @@ -281,7 +283,9 @@ > #define AS_COMMAND_FLUSH_MEM 0x05 /* Wait for memory accesses to complete, flush all the L1s cache then > flush all L2 caches then issue a flush region command to all MMUs */ > > -#define MMU_AS(as) (0x2400 + ((as) << 6)) > +#define MMU_BASE 0x2400 > +#define MMU_AS_SHIFT 0x06 > +#define MMU_AS(as) (MMU_BASE + ((as) << MMU_AS_SHIFT)) > > #define AS_TRANSTAB_LO(as) (MMU_AS(as) + 0x00) /* (RW) Translation Table Base Address for address space n, low word */ > #define AS_TRANSTAB_HI(as) (MMU_AS(as) + 0x04) /* (RW) Translation Table Base Address for address space n, high word */ > @@ -300,6 +304,8 @@ > #define AS_FAULTEXTRA_LO(as) (MMU_AS(as) + 0x38) /* (RO) Secondary fault address for address space n, low word */ > #define AS_FAULTEXTRA_HI(as) (MMU_AS(as) + 0x3C) /* (RO) Secondary fault address for address space n, high word */ > > +#define MMU_AS_STRIDE 0x40 /* Increase when adding new AS registers */ This comment doesn't make much sense - you can't go adding more registers. First it's hardware that defines this, and secondly if hardware did add more registers and change the stride then we'd still need compatibility with the old hardware. So most likely we'd need a new driver for the new hardware. So just drop the comment. I'm not really sure why we have both _STRIDE and _SHIFT for the MMU_AS (and only _STRIDE for JS_SLOT), but I've no objections to having both. However rather than having another magic number we can calculate the stride: #define MMU_AS_STRIDE (1 << MMU_AS_SHIFT) With that change: Reviewed-by: Steven Price <steven.price@xxxxxxx> > + > /* > * Begin LPAE MMU TRANSTAB register values > */
