The spi-cpha and spi-cpol properties are device specific and should be
accepted only if device really needs them. Explicitly list them in
device bindings in preparation of their removal from generic
spi-peripheral-props.yaml schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/display/panel/lgphilips,lb035q02.yaml | 10 ++++++++++
.../bindings/display/panel/samsung,ld9040.yaml | 10 ++++++++++
.../bindings/display/panel/samsung,lms380kf01.yaml | 12 +++++++++---
.../bindings/display/panel/samsung,lms397kf04.yaml | 12 +++++++++---
.../bindings/display/panel/samsung,s6d27a1.yaml | 12 +++++++++---
.../bindings/display/panel/sitronix,st7789v.yaml | 10 ++++++++++
.../devicetree/bindings/display/panel/tpo,td.yaml | 10 ++++++++++
7 files changed, 67 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
index 5e4e0e552c2f..0bd7bbad5b94 100644
--- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
@@ -21,6 +21,16 @@ properties:
enable-gpios: true
port: true
+ spi-cpha:
+ type: boolean
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ type: boolean
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
+
required:
- compatible
- enable-gpios
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
index d525165d6d63..ee6a61549916 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -42,6 +42,16 @@ properties:
panel-height-mm:
description: physical panel height [mm]
+ spi-cpha:
+ type: boolean
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ type: boolean
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
index 251f0c7115aa..7f010cb4aa20 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
@@ -43,9 +43,15 @@ properties:
backlight: true
- spi-cpha: true
-
- spi-cpol: true
+ spi-cpha:
+ type: boolean
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ type: boolean
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
spi-max-frequency:
maximum: 1200000
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
index cd62968426fb..794da8b45896 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
@@ -33,9 +33,15 @@ properties:
backlight: true
- spi-cpha: true
-
- spi-cpol: true
+ spi-cpha:
+ type: boolean
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ type: boolean
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
spi-max-frequency:
description: inherited as a SPI client node, the datasheet specifies
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
index 26e3c820a2f7..468111b1a1b4 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
@@ -41,9 +41,15 @@ properties:
backlight: true
- spi-cpha: true
-
- spi-cpol: true
+ spi-cpha:
+ type: boolean
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ type: boolean
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
spi-max-frequency:
maximum: 1200000
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
index 9e1d707c2ace..0eea7de51689 100644
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
@@ -23,6 +23,16 @@ properties:
backlight: true
port: true
+ spi-cpha:
+ type: boolean
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ type: boolean
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
+
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
index f902a9d74141..9b0e8659d6bd 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
@@ -28,6 +28,16 @@ properties:
backlight: true
port: true
+ spi-cpha:
+ type: boolean
+ description:
+ The device requires shifted clock phase (CPHA) mode.
+
+ spi-cpol:
+ type: boolean
+ description:
+ The device requires inverse clock polarity (CPOL) mode.
+
required:
- compatible
- port
--
2.34.1
