To: jbaron@xxxxxxxxxx>,gregkh@xxxxxxxxxxxxxxxxxx
CC: intel-gfx@xxxxxxxxxxxxxxxxxxxxx,nouveau@xxxxxxxxxxxxxxxxxxxxx,dri-devel@xxxxxxxxxxxxxxxxxxxxx
Add 'typed' "class FOO" support to dynamic-debug, where 'typed' means
either DISJOINT (like drm debug categories), or VERBOSE (like nouveau
debug-levels). Use it in DRM modules: core, helpers, and in drivers
i915, amdgpu, nouveau.
If a module is using class'd prdbgs (pr_debug_class, dev_dbg_class, or
adapted drm_dbg_<category>) or similar in its code, it can "opt in" to
allow dyndbg to manipulate those class'd prdebugs, by declaring in a
c-file:
DYNAMIC_DEBUG_CLASSMAP_TYPE(drm_debug_classes,
DD_CLASS_TYPE_DISJOINT, 0,
"DRM_UT_CORE",
"DRM_UT_DRIVER",
"DRM_UT_KMS",
"DRM_UT_PRIME",
"DRM_UT_ATOMIC",
"DRM_UT_VBL",
"DRM_UT_STATE",
"DRM_UT_LEASE",
"DRM_UT_DP",
"DRM_UT_DRMRES");
// todo: stringify __va_args inside the macro
By doing this, a module tells dyndbg that it:
- is using class-ids [0..N] in prdbg callsites
0..N is also the numeric values of DRM_UT_CORE..DRM_UT_DRMRES
- wants to refer to them by class-names [0..N]
- is mapping those names to those class-ids
- expects users to enable them via >control or >parameter/knob
Then, a user can enable the prdbgs by their class:
:#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control
With another 3-line bitmap param declaration, wrapping that
drm_debug_classes var in a module-param-cb:
:#> echo 0x1 > /sys/module/drm/parameters/debug
and optionally:
:#> echo +DRM_UT_CORE,-DRM_UT_KMS \
> /sys/module/drm/parameters/debug_cats
DYNAMIC_DEBUG gets:
new .class_id:5 field in struct _ddebug (callsite record)
big enough to represent drm_debug_category (after squeezing)
defaults to 31 for all existing prdbgs
classmaps (as declared in macro above) are in their own section,
and are loaded by kernel/module, and handled by add_module,
which attaches classmaps to their module's ddebug table.
ddebug_change() handles class FOO queries by validating theyre known
by each module in the loop, if unknown, the whole module is skipped,
so no changes are possible w/o a good classname.
Without class FOO in a query/command, only id=31 can be changed. This
protects new class'd prdbgs from changes by old user queries.
With this support, the module opt-in approach means that:
- modules declare classnames they like, meaningful names, DRM_UT_*
these are numbered [0..N]
- modules call pr_debug_class(N, "fmt..",...)
or drm_dbg(CAT, "fmt..",...) - same form.
- class-id space, while limited:0-30, is private to each module
- "class FOO" is only way to enable a class'd prdbg
- unrelated modules use 0..N separately, for different purposes.
- modules "share" classnames by separate decls (uses of macro)
all drm modules reuse the above declaration.
then they respond together to a >control
4 CLASS_TYPES are defined; they split behavior on 2 factors:
1. independent bits vs related:(X<Y) bits [0-N]
2. input form: number/hex vs CSV-list: [+-]CLASS_NAMES
DD_CLASS_TYPE_DISJOINT independent bits, 0x1f input is clearest
DD_CLASS_TYPE_VERBOSE (x<y), input is level, not bitvec
DD_CLASS_TYPE_SYMBOLIC DISJOINT with csv-list of +-CLASS_NAMEs
DD_CLASS_TYPE_LEVELS VERBOSE with csv-list of +-CLASS_NAMEs
Splitting up behavior this way is safe, and flexible:
- no bitmap-vs-level > sysknob ambiguity
as was case when both were accepted on same knob
- narrower interfaces
uint is uint
- can defer SYMBOLIC handling, but keep the enums.
it has no users ...
- can later add 2 more ENUMS allowing both inputs
in separate VERBOSE & DISJOINT choices
then authors choice if they want to accept mixed input
- can enumerate "wierd" relations if needed
DISJOINT|VERBOSE should cover everything I can forsee
but theres room for DD_CLASS_TYPE_STOCHASTIC (over the garage)
NB: DISJOINT v RELATED cover the space; there is no semi-related. The
relation could differ from (x<y), but atm I can't think of another
that makes any sensible distinction from VERBOSE.
Quick review of debug logging:
DRM is biggest use-case: 23 macros, issuing 10 exclusive categories of
messages, from ~5100 callsites, across core (drm, _*helpers), and 3+
drivers (Im working amdgpu, i915, more recently nouveau). These mostly
flow to drm_debug_enabled(category) for a print/no decision.
nouveau has minimum direct use of the DRM.debug macros, but does use
pr_debug (in VMM iirc), and drm_debug_enabled() in ~50 places via
macros, and another ~50 iirc due to NOUVEAU_DEBUG_MMU=y
What nouveau has most of is log-levels: there are ~800 uses of them;
nvkm_(fatal|error|warn|info|debug|trace|spam), they all flow thru
nvkm_printk_. Even excluding some levels as "always-on" and not
appropriate for dyndbg's extra resources and complexity, theres ~450
callsites.
A reported smattering of raw/adhoc debug code. all but unknown to me.
Like any debug logging, they're mostly off, and should have close to
0-off-cost. This is what dyndbg (with/on jump-label) was made for.
Bottom line: in order to unify more potential (drm,etc) use-cases,
dyndbg needs to support both debug classification schemes:
RELATED/VERBOSE and INDEPENDENT/DISJOINT.
This is rev3. rev2 is here:
https://lore.kernel.org/lkml/20220516225640.3102269-1-jim.cromie@xxxxxxxxx/
summary of diffs:
- rebased on 5.19-rc6 to pick up kernel/module changes
- tracfs bits now use __vstring, __vstr_assign, from S.Rostedt
- 4 class-map-types - as outlined above
now supports VERBOSE semantics, WIP nouveau integration.
v2 became the DISJOINT use case
Lots of API-ish surface area here *RFC*
- class-maps now in section("__dyndbg_classes")
class FOO queries are available at earlyboot / module-load
drop (un)?register_classes()
- test-dynamic-debug module
tests the 4 CLASS-TYPES
good place to bikeshed / paintshop the API
- nouveau - start poking - WIP
NV_PRINT -> dev_dbg (creates 632 prdbgs, but not class'd)
VERBOSE classes declared to see how they "fit", unused yet.
Summary:
- plenty of new stuff here.
- plenty of new API surface area.
- exposes CLASSNAMES to user, via control, >symbolic-sysknob
More on VERBOSE:
dyndbg's class scheme is names-based, so even for VERBOSE with
numeric input, there must be a "V0" name; a name with which to turn
off "V1". And don't do 'pr_dbg_class(0,..)'.
VERBOSE is an overlay on DISJOINT; the callback reads the input as a
level, and computes and applies the bitmap to enforce it. Yes it
wastes "V0" bit. That might matter if an author wanted many separate
verbose-knobs with a few levels each, but that seems fairly unlikely.
More importantly, it means that relative verbosity is not enforced at
the >control input; IOW this is allowed:
:#> echo class V1 -p > /proc/dynamic_debug/control
:#> echo class V3 +p > /proc/dynamic_debug/control
2nd line doesn't undo 1st, as it would if changed via sysfs-knob:
:#> echo 3 > /sys/module/drm/parameters/debug
ISTM this is fine, the "relative" meaning is added at the interface,
where it presents to a user. Doing otherwise means surgery to
ddebug_change, which seems unnecessary given an option.
CLASS NAMESPACE and DRM
The class namespace is flat and wide, so "V1" is a poor choice, other
than for demonstration (as in test_dynamic_debug module). If every
module had a "V1", turning them all on would issue lots of unrelated
noise.
Instead, class DRM_UT_CORE has a name with a specific sub-system wide
(ie multi-module) meaning, and can (and should) be responded to by all
cooperating modules.
For DRM, this means 4-5 duplicate uses of DEFINE_DYNDBG_CLASSMAP, from
multiple drivers' "*_{drm,dev,main}.c" files; all of them agreeing on
the classnames, map-type and base. Though repetitive, it is simple,
and consistent with the "static struct foo = {INIT_expr}" pattern used
in the macro. Initializing an extern sounded like a maze w/o cheese.
For core, drm_print.c has an additional task; it defines and
initializes the bitmap sysknob that converts bits to a query:
static struct ddebug_classes_bitmap_param drm_debug_bitmap = {
.bits = &__drm_debug,
.flags = "p",
.map = &drm_debug_classes,
};
module_param_cb(debug, ¶m_ops_dyndbg_classes,
&drm_debug_bitmap, 0600);
then the callback converts bit-toggles on input into something like:
:#> echo class DRM_UT_KMS +p > control
which enables all drm_dbg_kms() callsites in all modules that declared
that classname as known.
NB: classmaps and classes_bitmap_params are different structs. this
allows the former to be shared by 2 of latter, each toggling 'p' & 'T'
flags, to control output to syslog or tracelog independently.
NOUVEAU and multiple VERBOSE knobs ?
One thing nouveau has that I havent yet grokked is 2|3 independent
verbose levels, in {,cli,sub}->debug (see subdev.h). But Ive coded
them as 2 more macro invocations; using bases 10, 15 to avoid/respect
the 0-9 mapping of DRM.debug categories to those class-ids.
With this, the drm subsystem uses 20/31 of its class-id range, perhaps
63 is better, despite the cumbersome 0x-64bit interface. Note that
the sysfs-knobs do not expose the base/offset (its an inward-facing
.class_id offset); each sysfs-knob gets its own 0..N bitmap, the base
maps it to the 0..30 subrange allocated (manually, via the base arg to
macro) for this class-map.
anyway, heres how `modprobe nouveau` goes with dynamic_debug.verbose=3
[86512.693954] dyndbg: class[0]: module:nouveau base:15 len:5 ty:1
[86512.693958] dyndbg: 15: 0 NV_SUBDEV_DBG_OFF # aka V0
[86512.693959] dyndbg: 16: 1 NV_SUBDEV_DBG_INFO
[86512.693960] dyndbg: 17: 2 NV_SUBDEV_DBG_DEBUG
[86512.693960] dyndbg: 18: 3 NV_SUBDEV_DBG_TRACE
[86512.693960] dyndbg: 19: 4 NV_SUBDEV_DBG_SPAM
[86512.693961] dyndbg: class[1]: module:nouveau base:10 len:5 ty:1
[86512.693961] dyndbg: 10: 0 NV_CLI_DBG_OFF
[86512.693962] dyndbg: 11: 1 NV_CLI_DBG_INFO
[86512.693962] dyndbg: 12: 2 NV_CLI_DBG_DEBUG
[86512.693963] dyndbg: 13: 3 NV_CLI_DBG_TRACE
[86512.693963] dyndbg: 14: 4 NV_CLI_DBG_SPAM
[86512.693963] dyndbg: class[2]: module:nouveau base:0 len:10 ty:0
[86512.693964] dyndbg: 0: 0 DRM_UT_CORE
[86512.693964] dyndbg: 1: 1 DRM_UT_DRIVER
[86512.693965] dyndbg: 2: 2 DRM_UT_KMS
[86512.693965] dyndbg: 3: 3 DRM_UT_PRIME
[86512.693965] dyndbg: 4: 4 DRM_UT_ATOMIC
[86512.693966] dyndbg: 5: 5 DRM_UT_VBL
[86512.693966] dyndbg: 6: 6 DRM_UT_STATE
[86512.693966] dyndbg: 7: 7 DRM_UT_LEASE
[86512.693967] dyndbg: 8: 8 DRM_UT_DP
[86512.693967] dyndbg: 9: 9 DRM_UT_DRMRES
[86512.693968] dyndbg: module:nouveau attached 3 classes
[86512.693968] dyndbg: 632 debug prints in module nouveau
They are not yet wired by class; the nv-printks are using dev_dbg for
now, so they can be enabled with standard selections (module, func,
etc).
DYNDBG API
I added __pr_debug_cls to make things testable, I wanted to keep it
private/un-api, because drm already has drm_dbg_<cat>(cat, fmt..), and
that seemed a pretty good model to follow: enums with strong names for
class_id constants, and same names for classes.
ie: __pr_debug_cls(DRM_UT_KMS, "Whats the Matter with KMS: %s\n", reason);
But now nouveau probably wants/needs it, perhaps others too.
pr_dbg_cls / dev_dbg_cls ? class or debug spelled out ?
MORE TESTING with DRM & TRACEFS
Most dev & testing has been on virtme, with test-dynamic-debug module
doing an api-validation-demonstration. The test module proves
multiple sysknobs, but cannot prove real multi-module sharing of the
class-name space. The DRM.debug adaptation must (and does) do that.
Now Im running on real gpu/drm hw; on both an amdgpu desktop, and this
amdgpu+nouveau laptop. Its stable enough to type on, browse, build
more kernels, etc.
:#> uname -r
5.18.0-f2-00038-g61d300083196
:#> wc /proc/dynamic_debug/control
11554 95556 1442827 /proc/dynamic_debug/control
:#> lsmod | grep drm
drm_buddy 20480 1 i915
drm_ttm_helper 16384 2 amdgpu,nouveau
ttm 86016 4 amdgpu,drm_ttm_helper,i915,nouveau
drm_dp_helper 184320 3 amdgpu,i915,nouveau
drm_kms_helper 208896 6 drm_dp_helper,amdgpu,i915,nouveau
drm 655360 16 gpu_sched,drm_dp_helper,drm_kms_helper,drm_buddy,amdgpu,drm_ttm_helper,i915,ttm,nouveau
cec 49152 2 drm_dp_helper,i915
I've never turned on DRM.debug in frustration (or curiousity until
recently); I dunno what normal traffic looks like. So I wrote a
script to toggle each category: on/off for 1 sec, so I could 'more'
thru the output to see the partitioned streams.
Different runs (of '10' sec of active tracing) produce between 330-3500
lines of logging, depending upon mousing/screen activity. Heres a bit
of a many-window-select run: `wc trace` gives "size" of the category's stream.
:#> trc_classes
12 /sys/kernel/tracing/trace
doing class DRM_UT_CORE +/- T 1394 13941 141614 /sys/kernel/tracing/trace
doing class DRM_UT_DRIVER +/- T 1396 13959 141816 /sys/kernel/tracing/trace
doing class DRM_UT_KMS +/- T 1482 14521 148246 /sys/kernel/tracing/trace
doing class DRM_UT_PRIME +/- T 1484 14539 148446 /sys/kernel/tracing/trace
doing class DRM_UT_ATOMIC +/- T 2984 31658 396064 /sys/kernel/tracing/trace
doing class DRM_UT_VBL +/- T 3411 37321 449848 /sys/kernel/tracing/trace
doing class DRM_UT_STATE +/- T 3413 37339 450048 /sys/kernel/tracing/trace
doing class DRM_UT_LEASE +/- T 3415 37357 450248 /sys/kernel/tracing/trace
doing class DRM_UT_DP +/- T 3417 37375 450442 /sys/kernel/tracing/trace
doing class DRM_UT_DRMRES +/- T 3419 37393 450644 /sys/kernel/tracing/trace
and some mid-run output from a quiet run, with less repetition.
bash-96790 [006] ..... 410237.432255: tracing_mark_write: doing class DRM_UT_DRIVER +T
bash-96790 [006] ..... 410238.610319: tracing_mark_write: doing class DRM_UT_DRIVER -T
bash-96790 [006] ..... 410239.776285: tracing_mark_write: doing class DRM_UT_KMS +T
gnome-shell-2101 [003] ..... 410239.923029: drm_debug: [FB:98]
kworker/u32:10-367584 [010] ..... 410239.924627: drm_debug: Allow idle optimizations (MALL): 0
kworker/u32:0-364714 [008] ..... 410239.935126: drm_debug: Allow idle optimizations (MALL): 1
gnome-shell-2101 [003] ..... 410240.527186: drm_debug: [FB:100]
kworker/u32:0-364714 [008] ..... 410240.528686: drm_debug: Allow idle optimizations (MALL): 0
kworker/u32:10-367584 [010] ..... 410240.539378: drm_debug: Allow idle optimizations (MALL): 1
bash-96790 [006] ..... 410240.957921: tracing_mark_write: doing class DRM_UT_KMS -T
bash-96790 [006] ..... 410242.199120: tracing_mark_write: doing class DRM_UT_PRIME +T
bash-96790 [006] ..... 410243.301988: tracing_mark_write: doing class DRM_UT_PRIME -T
bash-96790 [006] ..... 410244.416400: tracing_mark_write: doing class DRM_UT_ATOMIC +T
gnome-shell-2101 [003] ..... 410244.653372: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] Allocated atomic state 000000001f1e6cb6
gnome-shell-2101 [003] ..... 410244.653381: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] Added [PLANE:55:plane-3] 00000000785ae904 state to 000000001f1e6cb6
gnome-shell-2101 [003] ..... 410244.653384: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] Added [CRTC:67:crtc-0] 00000000b06ca618 state to 000000001f1e6cb6
gnome-shell-2101 [003] ..... 410244.653389: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] Set [FB:98] for [PLANE:55:plane-3] state 00000000785ae904
gnome-shell-2101 [003] ..... 410244.653392: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] checking 000000001f1e6cb6
gnome-shell-2101 [003] ..... 410244.653407: drm_devdbg: cat:4, (0xffff8f26c173de00:0000:06:00.0)[UNSAFE-MEMORY] committing 000000001f1e6cb6 nonblocking
kworker/u32:0-364714 [010] ..... 410244.653729: drm_debug: amdgpu_crtc id:0 crtc_state_flags: enable:1, active:1, planes_changed:1, mode_changed:0,active_changed:0,connectors_changed:0
kworker/u32:0-364714 [010] ..... 410244.654642: drm_debug: plane: id=3 dcc_en=0
a few things to note in the trace output:
. the event-name: drm_(debug|devdbg) is not very informative
. drm_devdbg fmt has cat:%d, it could be the classname, but that should
replace event-name, not supplement it. this pertains to drm_debug too.
. drm_devdbg has lots of (dev-info), that could be optional on a new flag(s)
If anyone wants to repeat the above with the patchset, the .rc file follows:
events_3() {
local a=$1
local b=$2
local c=$3
echo $a > /sys/kernel/tracing/events/dyndbg/enable
# avoid drm_vblank*, its noisy
echo $b > /sys/kernel/tracing/events/drm/drm_debug/enable
echo $c > /sys/kernel/tracing/events/drm/drm_devdbg/enable
}
flags_class() {
local flgs=$1;
local cls=$2;
echo class $cls $flgs > /proc/dynamic_debug/control
}
# turn on each DRM_UT_* for 1 second each.
# kinda shows relative traffic of each category
# separated into blocks to get flavor of each
drm_classes() {
local flgs=$1
[ -z $flgs ] && flgs="p"
#echo > /sys/kernel/tracing/trace
#wc /sys/kernel/tracing/trace
for cls in DRM_UT_CORE DRM_UT_DRIVER DRM_UT_KMS DRM_UT_PRIME DRM_UT_ATOMIC \
DRM_UT_VBL DRM_UT_STATE DRM_UT_LEASE DRM_UT_DP \
DRM_UT_DRMRES;
do
echo -n doing class $cls " "
echo doing class $cls +$flgs
sleep .1
flags_class +$flgs $cls
sleep 1
echo doing class $cls -$flgs
sleep .1
flags_class -$flgs $cls
sleep 1
#wc /sys/kernel/tracing/trace
done
}
# like above but with T flag, and markers, trace/enable
trc_classes() {
local flgs=$1
[ -z $flgs ] && flgs="T"
echo > /sys/kernel/tracing/trace
wc -l /sys/kernel/tracing/trace
events_3 1 1 1
for cls in DRM_UT_CORE DRM_UT_DRIVER DRM_UT_KMS DRM_UT_PRIME \
DRM_UT_ATOMIC \
DRM_UT_VBL DRM_UT_STATE DRM_UT_LEASE DRM_UT_DP \
DRM_UT_DRMRES;
do
echo -n doing class $cls +/- $flgs " "
echo doing class $cls +$flgs > /sys/kernel/tracing/trace_marker
sleep .1
flags_class +$flgs $cls
sleep 1
echo doing class $cls -$flgs > /sys/kernel/tracing/trace_marker
sleep .1
flags_class -$flgs $cls
sleep 1
wc /sys/kernel/tracing/trace
done
events_3 0 0 0
}
I ignored a few checkpatch warns, preferring source's spacing conventions.
Jim Cromie (40):
1st, a group of "cleanups"
dyndbg: fix static_branch manipulation
dyndbg: fix module.dyndbg handling
dyndbg: show both old and new in change-info
dyndbg: reverse module walk in cat control
dyndbg: reverse module.callsite walk in cat control
dyndbg: use ESCAPE_SPACE for cat control
dyndbg: let query-modname override actual module name
dyndbg: add test_dynamic_debug module
dyndbg: drop EXPORTed dynamic_debug_exec_queries
class FOO support
dyndbg: add class_id to pr_debug callsites
dyndbg: add __pr_debug_cls for testing
dyndbg: add DECLARE_DYNDBG_CLASSMAP
kernel/module: add __dyndbg_classes section
dyndbg: add ddebug_attach_module_classes
dyndbg: validate class FOO by checking with module
dyndbg: add drm.debug style bitmap support
dyndbg: test DECLARE_DYNDBG_CLASSMAP, sysfs nodes
doc-dyndbg: describe "class CLASS_NAME" query support
doc-dyndbg: edit dynamic-debug-howto for brevity, audience
drm.debug adaptation
drm_print: condense enum drm_debug_category
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: interpose drm_*dbg with forwarding macros
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print: include dyndbg header indirectly
drm_print: refine drm_debug_enabled for jump-label
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: add _ddebug descriptor to drm_*dbg prototypes
nouveau: change nvkm_debug/trace to use dev_dbg POC
Steven Rostedt (Google) (1):
tracing/events: Add __vstring() and __assign_vstr() helper macros
new tracefs events:
dyndbg: add _DPRINTK_FLAGS_ENABLED
dyndbg: add _DPRINTK_FLAGS_TRACE
dyndbg: add write-events-to-tracefs code
dyndbg: add 2 trace-events: drm_{,dev}debug
dyndbg: add 2 more trace-events: pr_debug, dev_dbg
dyndbg/drm: POC add tracebits sysfs-knob
nouveau-VERBOSE integration: WIP/exploratory.
nouveau: adapt NV_DEBUG, NV_ATOMIC to use DRM.debug
nouveau-dyndbg: alter DEBUG, TRACE, SPAM levels to use dyndbg
nouveau-dbg: add 2 verbose-classmaps for CLI, SUBDEV
nouveau-dbg: fixup lost prdbgs
nouveau-dyndbg: wip subdev refine, breaks on use
.../admin-guide/dynamic-debug-howto.rst | 252 ++++----
MAINTAINERS | 2 +
drivers/gpu/drm/Kconfig | 12 +
drivers/gpu/drm/Makefile | 2 +
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 14 +
drivers/gpu/drm/display/drm_dp_helper.c | 13 +
drivers/gpu/drm/drm_crtc_helper.c | 13 +
drivers/gpu/drm/drm_print.c | 83 ++-
drivers/gpu/drm/i915/i915_params.c | 12 +
.../gpu/drm/nouveau/include/nvkm/core/debug.h | 16 +
.../drm/nouveau/include/nvkm/core/subdev.h | 17 +-
drivers/gpu/drm/nouveau/nouveau_drm.c | 20 +
drivers/gpu/drm/nouveau/nouveau_drv.h | 16 +-
drivers/gpu/drm/nouveau/nvkm/core/subdev.c | 23 +
include/asm-generic/vmlinux.lds.h | 3 +
include/drm/drm_print.h | 85 ++-
include/linux/dynamic_debug.h | 179 +++++-
include/linux/trace_events.h | 18 +
include/trace/events/drm.h | 54 ++
include/trace/events/dyndbg.h | 74 +++
include/trace/stages/stage1_struct_define.h | 3 +
include/trace/stages/stage2_data_offsets.h | 3 +
include/trace/stages/stage4_event_fields.h | 3 +
include/trace/stages/stage5_get_offsets.h | 4 +
include/trace/stages/stage6_event_callback.h | 7 +
kernel/module/internal.h | 2 +
kernel/module/main.c | 10 +-
lib/Kconfig.debug | 10 +
lib/Makefile | 1 +
lib/dynamic_debug.c | 540 +++++++++++++++---
lib/test_dynamic_debug.c | 165 ++++++
31 files changed, 1374 insertions(+), 282 deletions(-)
create mode 100644 include/trace/events/drm.h
create mode 100644 include/trace/events/dyndbg.h
create mode 100644 lib/test_dynamic_debug.c
--
2.36.1
