From: allen chen <allen.chen@xxxxxxxxxx>
Change power sequence to meet it6505 data sheet requirement when boot on.
Signed-off-by: Pin-Yen Lin <treapking@xxxxxxxxxxxx>
Signed-off-by: Allen Chen <allen.chen@xxxxxxxxxx>
Reviewed-by: Robert Foss <robert.foss@xxxxxxxxxx>
---
drivers/gpu/drm/bridge/ite-it6505.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 2d119e3016b3..aa5e0aa1af85 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -3029,7 +3029,7 @@ static int it6505_init_pdata(struct it6505 *it6505)
return PTR_ERR(pdata->ovdd);
}
- pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(pdata->gpiod_reset)) {
dev_err(dev, "gpiod_reset gpio not found");
return PTR_ERR(pdata->gpiod_reset);
--
2.25.1
