Re: [PATCH v2 27/29] ACPI: video: Drop Clevo/TUXEDO NL5xRU and NL5xNU acpi_backlight=native quirks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 7/12/22 21:39, Hans de Goede wrote:
acpi_backlight=native is the default for these, but as the comment
explains the quirk was still necessary because even briefly registering
the acpi_video0 backlight; and then unregistering it once the native
driver showed up, was leading to issues.

After the "ACPI: video: Make backlight class device registration
a separate step" patch from earlier in this patch-series, we no
longer briefly register the acpi_video0 backlight on systems where
the native driver should be used.

So this is no longer an issue an the quirks are no longer needed.

Cc: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Tested and can confirm: The quirks are no longer needed with this Patchset.

Tested-by: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>

Kind Regards,

Werner Sembach

---
  drivers/acpi/video_detect.c | 75 -------------------------------------
  1 file changed, 75 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 2a4d376a703e..4b9395d1bda7 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -599,81 +599,6 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
  		DMI_MATCH(DMI_BOARD_NAME, "N250P"),
  		},
  	},
-	/*
-	 * Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a
-	 * working native and video interface. However the default detection
-	 * mechanism first registers the video interface before unregistering
-	 * it again and switching to the native interface during boot. This
-	 * results in a dangling SBIOS request for backlight change for some
-	 * reason, causing the backlight to switch to ~2% once per boot on the
-	 * first power cord connect or disconnect event. Setting the native
-	 * interface explicitly circumvents this buggy behaviour, by avoiding
-	 * the unregistering process.
-	 */
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xRU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xNU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TUXEDO"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xNU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "SchenkerTechnologiesGmbH"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
-		},
-	},
-	{
-	.callback = video_detect_force_native,
-	.ident = "Clevo NL5xNU",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
-		DMI_MATCH(DMI_BOARD_NAME, "NL5xNU"),
-		},
-	},
/*
  	 * Desktops which falsely report a backlight and which our heuristics



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux