On 12/07/2022 22:02, Konrad Dybcio wrote: > Add bindings for the display panel used on some Sony Xperia XZ2 and XZ2 > Compact smartphones. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> > --- > .../display/panel/sony,td4353-jdi.yaml | 84 +++++++++++++++++++ > 1 file changed, 84 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml > new file mode 100644 > index 000000000000..d75abc72ad1b > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml > @@ -0,0 +1,84 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/sony,td4353-jdi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Sony TD4353 JDI 5 / 5.7" 2160x1080 MIPI-DSI Panel > + > +maintainers: > + - Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx> > + > +description: | > + The Sony TD4353 JDI is a 5 (XZ2c) / 5.7 (XZ2) inch 2160x1080 > + MIPI-DSI panel, used in Xperia XZ2 and XZ2 Compact smartphones. > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + enum: > + - sony,td4353-jdi-akari > + - sony,td4353-jdi-apollo Shouldn't the properties of panel like width and height be specified by dedicated properties, instead of customizing compatible? The device is "td4353-jdi", the same in both cases, isn't it? > + > + reg: true > + > + backlight: true > + > + vddio-supply: > + description: VDDIO 1.8V supply > + > + vsp-supply: > + description: Positive 5.5V supply > + > + vsn-supply: > + description: Negative 5.5V supply > + > + preset-gpios: > + description: Display panel reset pin > + > + treset-gpios: > + description: Touch panel reset pin > + > + port: true > + > +required: > + - compatible > + - reg > + - vddio-supply > + - vsp-supply > + - vsn-supply > + - preset-gpios > + - treset-gpios > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel: panel@0 { > + compatible = "sony,td4353-jdi-akari"; > + reg = <0>; > + > + backlight = <&pmi8998_wled>; > + vddio-supply = <&vreg_l14a_1p8>; > + vsp-supply = <&lab>; > + vsn-supply = <&ibb>; > + preset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; > + treset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; > + > + port { > + panel_in: endpoint { Inconsistent indentation. > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + }; > + }; > +... Best regards, Krzysztof