Hi Matthias,
Thanks for the review.
On Fri, 2022-07-08 at 17:42 +0200, Matthias Brugger wrote:
>
> On 22/06/2022 15:08, Nancy.Lin wrote:
> > Add mmsys for support 64 reset bits. It is a preparation for MT8195
> > vdosys1 HW reset. MT8195 vdosys1 has more than 32 reset bits.
> >
> > 1. Add the number of reset bits in mmsys private data
> > 2. move the whole "reset register code section" behind the
> > "get mmsys->data" code section for getting the num_resets in mmsys-
> > >data.
> >
> > Signed-off-by: Nancy.Lin <nancy.lin@xxxxxxxxxxxx>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@xxxxxxxxxxxxx>
> > Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx>
> > Tested-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
> > ---
> > drivers/soc/mediatek/mtk-mmsys.c | 35 ++++++++++++++++++++-------
> > -----
> > drivers/soc/mediatek/mtk-mmsys.h | 1 +
> > 2 files changed, 23 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-mmsys.c
> > b/drivers/soc/mediatek/mtk-mmsys.c
> > index 16be77d5acac..47b72ae72cc2 100644
> > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > @@ -20,6 +20,8 @@
> > #include "mt8195-mmsys.h"
> > #include "mt8365-mmsys.h"
> >
> > +#define MMSYS_SW_RESET_PER_REG 32
> > +
> > static const struct mtk_mmsys_driver_data
> > mt2701_mmsys_driver_data = {
> > .clk_driver = "clk-mt2701-mm",
> > .routes = mmsys_default_routing_table,
> > @@ -86,6 +88,7 @@ static const struct mtk_mmsys_driver_data
> > mt8173_mmsys_driver_data = {
> > .routes = mmsys_default_routing_table,
> > .num_routes = ARRAY_SIZE(mmsys_default_routing_table),
> > .sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> > + .num_resets = 32,
> > };
> >
> > static const struct mtk_mmsys_match_data mt8173_mmsys_match_data
> > = {
> > @@ -100,6 +103,7 @@ static const struct mtk_mmsys_driver_data
> > mt8183_mmsys_driver_data = {
> > .routes = mmsys_mt8183_routing_table,
> > .num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
> > .sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> > + .num_resets = 32,
> > };
> >
> > static const struct mtk_mmsys_match_data mt8183_mmsys_match_data
> > = {
> > @@ -114,6 +118,7 @@ static const struct mtk_mmsys_driver_data
> > mt8186_mmsys_driver_data = {
> > .routes = mmsys_mt8186_routing_table,
> > .num_routes = ARRAY_SIZE(mmsys_mt8186_routing_table),
> > .sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
> > + .num_resets = 32,
> > };
> >
> > static const struct mtk_mmsys_match_data mt8186_mmsys_match_data
> > = {
> > @@ -288,10 +293,14 @@ static int mtk_mmsys_reset_update(struct
> > reset_controller_dev *rcdev, unsigned l
> > {
> > struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys,
> > rcdev);
> > unsigned long flags;
> > + u32 offset;
> > +
> > + offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32);
> > + id = id % MMSYS_SW_RESET_PER_REG;
> >
> > spin_lock_irqsave(&mmsys->lock, flags);
> >
> > - mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset,
> > BIT(id),
> > + mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset +
> > offset, BIT(id),
> > assert ? 0 : BIT(id), NULL);
>
> reg = mmsys->data->sw0_rst_offset + offset;
> mtk_mmsys_update_bits(mmsys, reg, BIT(id),
> assert ? 0 : BIT(id), NULL);
>
> Other then that, patch looks good.
> By the way setting val depending on assert in the function call gets
> (for me)
> hard to read, as I said earlier.
>
> Regards,
> Matthias
>
OK, I will add reg variable and modify it as you said in [1].
[1]
https://patchwork.kernel.org/project/linux-mediatek/patch/20220622130824.29143-5-nancy.lin@xxxxxxxxxxxx/
BRs,
Nancy
> >
> > spin_unlock_irqrestore(&mmsys->lock, flags);
> > @@ -349,18 +358,6 @@ static int mtk_mmsys_probe(struct
> > platform_device *pdev)
> > return ret;
> > }
> >
> > - spin_lock_init(&mmsys->lock);
> > -
> > - mmsys->rcdev.owner = THIS_MODULE;
> > - mmsys->rcdev.nr_resets = 32;
> > - mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> > - mmsys->rcdev.of_node = pdev->dev.of_node;
> > - ret = devm_reset_controller_register(&pdev->dev, &mmsys-
> > >rcdev);
> > - if (ret) {
> > - dev_err(&pdev->dev, "Couldn't register mmsys reset
> > controller: %d\n", ret);
> > - return ret;
> > - }
> > -
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > if (!res) {
> > dev_err(dev, "Couldn't get mmsys resource\n");
> > @@ -382,6 +379,18 @@ static int mtk_mmsys_probe(struct
> > platform_device *pdev)
> > mmsys->data = match_data->drv_data[0];
> > }
> >
> > + spin_lock_init(&mmsys->lock);
> > +
> > + mmsys->rcdev.owner = THIS_MODULE;
> > + mmsys->rcdev.nr_resets = mmsys->data->num_resets;
> > + mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> > + mmsys->rcdev.of_node = pdev->dev.of_node;
> > + ret = devm_reset_controller_register(&pdev->dev, &mmsys-
> > >rcdev);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Couldn't register mmsys reset
> > controller: %d\n", ret);
> > + return ret;
> > + }
> > +
> > #if IS_REACHABLE(CONFIG_MTK_CMDQ)
> > ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
> > if (ret)
> > diff --git a/drivers/soc/mediatek/mtk-mmsys.h
> > b/drivers/soc/mediatek/mtk-mmsys.h
> > index f01ba206481d..20a271b80b3b 100644
> > --- a/drivers/soc/mediatek/mtk-mmsys.h
> > +++ b/drivers/soc/mediatek/mtk-mmsys.h
> > @@ -92,6 +92,7 @@ struct mtk_mmsys_driver_data {
> > const struct mtk_mmsys_routes *routes;
> > const unsigned int num_routes;
> > const u16 sw0_rst_offset;
> > + const u32 num_resets;
> > };
> >
> > struct mtk_mmsys_match_data {
