On Fri, 2022-07-01 at 14:33 +0800, Rex-BC Chen wrote: > On Fri, 2022-07-01 at 11:15 +0800, xinlei.lee@xxxxxxxxxxxx wrote: > > From: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx> > > > > Dpi output needs to adjust the output format to dual edge for > > MT8186. > > > > Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx> > > Signed-off-by: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx> > > --- > > drivers/gpu/drm/mediatek/mtk_dpi.c | 21 +++++++++++++++++++++ > > drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 5 +++++ > > 2 files changed, 26 insertions(+) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c > > b/drivers/gpu/drm/mediatek/mtk_dpi.c > > index e61cd67b978f..82a5209a1dd8 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c > > @@ -15,6 +15,7 @@ > > #include <linux/pinctrl/consumer.h> > > #include <linux/platform_device.h> > > #include <linux/types.h> > > +#include <linux/soc/mediatek/mtk-mmsys.h> > > > > Please reorder this. > > > #include <video/videomode.h> > > > > @@ -28,6 +29,7 @@ > > #include "mtk_disp_drv.h" > > #include "mtk_dpi_regs.h" > > #include "mtk_drm_ddp_comp.h" > > +#include "mtk_drm_drv.h" > > > > enum mtk_dpi_out_bit_num { > > MTK_DPI_OUT_BIT_NUM_8BITS, > > @@ -85,6 +87,7 @@ struct mtk_dpi { > > struct pinctrl_state *pins_dpi; > > u32 output_fmt; > > int refcount; > > + struct device *mmsys_dev; > > }; > > > > static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b) > > @@ -125,6 +128,7 @@ struct mtk_dpi_conf { > > bool edge_sel_en; > > const u32 *output_fmts; > > u32 num_output_fmts; > > + bool rgb888_dual_enable; > > }; > > > > static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, > > u32 mask) > > @@ -393,6 +397,9 @@ static void mtk_dpi_dual_edge(struct mtk_dpi > > *dpi) > > mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, > > dpi->output_fmt == > > MEDIA_BUS_FMT_RGB888_2X12_LE ? > > EDGE_SEL : 0, EDGE_SEL); > > + if (dpi->conf->rgb888_dual_enable) > > + mtk_mmsys_ddp_dpi_confing(dpi->mmsys_dev, > > DPI_RGB888_DDR_CON, > > + DPI_FORMAT_MASK, NULL); > > } else { > > mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, > > 0); > > } > > @@ -705,8 +712,10 @@ static int mtk_dpi_bind(struct device *dev, > > struct device *master, void *data) > > { > > struct mtk_dpi *dpi = dev_get_drvdata(dev); > > struct drm_device *drm_dev = data; > > + struct mtk_drm_private *priv = drm_dev->dev_private; > > int ret; > > > > + dpi->mmsys_dev = priv->mmsys_dev; > > ret = drm_simple_encoder_init(drm_dev, &dpi->encoder, > > DRM_MODE_ENCODER_TMDS); > > if (ret) { > > @@ -823,6 +832,15 @@ static const struct mtk_dpi_conf mt8192_conf = > > { > > .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts), > > }; > > > > +static const struct mtk_dpi_conf mt8186_conf = { > > + .cal_factor = mt8183_calculate_factor, > > + .reg_h_fre_con = 0xe0, > > + .max_clock_khz = 150000, > > + .output_fmts = mt8183_output_fmts, > > + .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts), > > + .rgb888_dual_enable = true, > > +}; > > + > > please put this between 8183 and 8192. > > > static int mtk_dpi_probe(struct platform_device *pdev) > > { > > struct device *dev = &pdev->dev; > > @@ -945,6 +963,9 @@ static const struct of_device_id > > mtk_dpi_of_ids[] > > = { > > { .compatible = "mediatek,mt8192-dpi", > > .data = &mt8192_conf, > > }, > > + { .compatible = "mediatek,mt8186-dpi", > > + .data = &mt8186_conf, > > + }, > > ditto > > > { }, > > }; > > MODULE_DEVICE_TABLE(of, mtk_dpi_of_ids); > > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h > > b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h > > index 3a02fabe1662..24d4cdf3696b 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h > > +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h > > @@ -217,4 +217,9 @@ > > > > #define EDGE_SEL_EN BIT(5) > > #define H_FRE_2N BIT(25) > > + > > +#define DPI_FORMAT_MASK 0x1 > > +#define DPI_RGB888_DDR_CON BIT(0) > > +#define DPI_RGB565_SDR_CON BIT(1) > > + > > #endif /* __MTK_DPI_REGS_H */ > > Hi Rex: Thanks for your review. I will sort them in the next version. Best Regards! xinlei