Re: [PATCH v2 2/4] drm/etnaviv: add loadavg accounting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Fr., 24. Juni 2022 um 11:38 Uhr schrieb Lucas Stach <l.stach@xxxxxxxxxxxxxx>:
>
> Am Dienstag, dem 21.06.2022 um 09:20 +0200 schrieb Christian Gmeiner:
> > The GPU has an idle state register where each bit represents the idle
> > state of a sub-GPU component like FE or TX. Sample this register
> > every 10ms and calculate a simple moving average over the sub-GPU
> > component idle states with a total observation time frame of 1s.
> >
> > This provides us with a percentage based load of each sub-GPU
> > component.
> >
> > Signed-off-by: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/etnaviv/etnaviv_drv.c | 14 ++++++
> >  drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 64 ++++++++++++++++++++++++++-
> >  drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 37 ++++++++++++++++
> >  3 files changed, 114 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/etnaviv/etnaviv_drv.c b/drivers/gpu/drm/etnaviv/etnaviv_drv.c
> > index 1d2b4fb4bcf8..d5c6115e56bd 100644
> > --- a/drivers/gpu/drm/etnaviv/etnaviv_drv.c
> > +++ b/drivers/gpu/drm/etnaviv/etnaviv_drv.c
> > @@ -46,6 +46,19 @@ static void load_gpu(struct drm_device *dev)
> >       }
> >  }
> >
> > +static void unload_gpu(struct drm_device *dev)
> > +{
> > +     struct etnaviv_drm_private *priv = dev->dev_private;
> > +     unsigned int i;
> > +
> > +     for (i = 0; i < ETNA_MAX_PIPES; i++) {
> > +             struct etnaviv_gpu *g = priv->gpu[i];
> > +
> > +             if (g)
> > +                     etnaviv_gpu_shutdown(g);
> > +     }
> > +}
> > +
> >  static int etnaviv_open(struct drm_device *dev, struct drm_file *file)
> >  {
> >       struct etnaviv_drm_private *priv = dev->dev_private;
> > @@ -557,6 +570,7 @@ static void etnaviv_unbind(struct device *dev)
> >       struct drm_device *drm = dev_get_drvdata(dev);
> >       struct etnaviv_drm_private *priv = drm->dev_private;
> >
> > +     unload_gpu(drm);
> >       drm_dev_unregister(drm);
> >
> >       component_unbind_all(dev, drm);
> > diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> > index 37018bc55810..202002ae75ee 100644
> > --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> > +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> > @@ -27,6 +27,8 @@
> >  #include "state_hi.xml.h"
> >  #include "cmdstream.xml.h"
> >
> > +static const ktime_t loadavg_polling_frequency = 10 * NSEC_PER_MSEC;
> > +
> Feeling like a nitpicker, but the thing defined here isn't a frequency,
> but a time delta/interval.
>

Will rename it in the next version of the patch series.

>
> >  static const struct platform_device_id gpu_ids[] = {
> >       { .name = "etnaviv-gpu,2d" },
> >       { },
> > @@ -745,6 +747,32 @@ static void etnaviv_gpu_hw_init(struct etnaviv_gpu *gpu)
> >       gpu_write(gpu, VIVS_HI_INTR_ENBL, ~0U);
> >  }
> >
> > +static enum hrtimer_restart etnaviv_loadavg_function(struct hrtimer *t)
> > +{
> > +     struct etnaviv_gpu *gpu = container_of(t, struct etnaviv_gpu, loadavg_timer);
> > +     const u32 idle = gpu_read(gpu, VIVS_HI_IDLE_STATE);
> > +     int i;
> > +
> > +     gpu->loadavg_last_sample_time = ktime_get();
> > +
> > +     for (i = 0; i < ARRAY_SIZE(etna_idle_module_names); i++)
> > +             if ((idle & etna_idle_module_names[i].bit))
> > +                     sma_loadavg_add(&gpu->loadavg_value[i], 0);
> > +             else
> > +                     sma_loadavg_add(&gpu->loadavg_value[i], 100);
> > +
> > +     spin_lock(&gpu->loadavg_spinlock);
> > +
> > +     for (i = 0; i < ARRAY_SIZE(etna_idle_module_names); i++)
> > +             gpu->loadavg_percentage[i] = sma_loadavg_read(&gpu->loadavg_value[i]);
> > +
> > +     spin_unlock(&gpu->loadavg_spinlock);
>
> After pondering this for a bit, I don't think we need this spinlock.
> The percentage is a single value per engine, so they are already single
> write atomic. The worst thing that can happen without this spinlock is
> that on read of the loadavg some engines already have the value of
> sample period n+1 integrated, while another set is still at n, which I
> don't think we care much about, as those load values are already quite
> coarse.
>

Okay.. will remove the spinlock.

> > +
> > +     hrtimer_forward_now(t, loadavg_polling_frequency);
> > +
> > +     return HRTIMER_RESTART;
> > +}
> > +
> >  int etnaviv_gpu_init(struct etnaviv_gpu *gpu)
> >  {
> >       struct etnaviv_drm_private *priv = gpu->drm->dev_private;
> > @@ -839,6 +867,11 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu)
> >       for (i = 0; i < ARRAY_SIZE(gpu->event); i++)
> >               complete(&gpu->event_free);
> >
> > +     /* Setup loadavg timer */
> > +     hrtimer_init(&gpu->loadavg_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS_SOFT);
> > +     gpu->loadavg_timer.function = etnaviv_loadavg_function;
> > +     hrtimer_start(&gpu->loadavg_timer, loadavg_polling_frequency, HRTIMER_MODE_ABS_SOFT);
> > +
> >       /* Now program the hardware */
> >       mutex_lock(&gpu->lock);
> >       etnaviv_gpu_hw_init(gpu);
> > @@ -859,6 +892,11 @@ int etnaviv_gpu_init(struct etnaviv_gpu *gpu)
> >       return ret;
> >  }
> >
> > +void etnaviv_gpu_shutdown(struct etnaviv_gpu *gpu)
> > +{
> > +     hrtimer_cancel(&gpu->loadavg_timer);
> > +}
> > +
> >  #ifdef CONFIG_DEBUG_FS
> >  struct dma_debug {
> >       u32 address[2];
> > @@ -1585,6 +1623,8 @@ int etnaviv_gpu_wait_idle(struct etnaviv_gpu *gpu, unsigned int timeout_ms)
> >  static int etnaviv_gpu_hw_suspend(struct etnaviv_gpu *gpu)
> >  {
> >       if (gpu->initialized && gpu->fe_running) {
> > +             hrtimer_cancel(&gpu->loadavg_timer);
> > +
> This isn't symmetric. Here you only cancel the timer when FE was
> running, but in the resume function you unconditionally start the
> timer.
>
>
> Moving the timer start into etnaviv_gpu_start_fe() seems to be a good
> idea. Sampling the idle state of a GPU with the FE not running doesn't
> make much sense in the first place, as it will unsurprisingly be fully
> idle. Doing this would also allow you to drop the
> etnaviv_gpu_shutdown() and unload_gpu() functions, as the timer doesn't
> need to be started when initializing the GPU.
>

Will try that.

>
> >               /* Replace the last WAIT with END */
> >               mutex_lock(&gpu->lock);
> >               etnaviv_buffer_end(gpu);
> > @@ -1608,7 +1648,8 @@ static int etnaviv_gpu_hw_suspend(struct etnaviv_gpu *gpu)
> >  #ifdef CONFIG_PM
> >  static int etnaviv_gpu_hw_resume(struct etnaviv_gpu *gpu)
> >  {
> > -     int ret;
> > +     s64 missing_samples;
> > +     int ret, i, j;
> >
> >       ret = mutex_lock_killable(&gpu->lock);
> >       if (ret)
> > @@ -1617,7 +1658,27 @@ static int etnaviv_gpu_hw_resume(struct etnaviv_gpu *gpu)
> >       etnaviv_gpu_update_clock(gpu);
> >       etnaviv_gpu_hw_init(gpu);
> >
> > +     /* Update loadavg based on delta of suspend and resume ktime.
> > +      *
> > +      * Our SMA algorithm uses a fixed size of 100 items to be able
> > +      * to calculate the mean over one second as we sample every 10ms.
> > +      */
> > +     missing_samples = div_s64(ktime_ms_delta(ktime_get(), gpu->loadavg_last_sample_time), 10);
>
> In the timer function you use the loadavg_polling_frequency const for
> this value. It would be good to be consistent here. Probably just
> #define the polling interval and use this both here and in the timer
> function.
>

Okay.

> > +     missing_samples = min(missing_samples, (s64)100);
> > +
> > +     spin_lock_bh(&gpu->loadavg_spinlock);
> > +
> > +     for (i = 0; i < ARRAY_SIZE(etna_idle_module_names); i++) {
> > +             struct sma_loadavg *loadavg = &gpu->loadavg_value[i];
> > +
> > +             for (j = 0; j < missing_samples; j++)
> > +                     sma_loadavg_add(loadavg, 0);
> > +     }
> > +
> > +     spin_unlock_bh(&gpu->loadavg_spinlock);
> > +
> >       mutex_unlock(&gpu->lock);
> > +     hrtimer_start(&gpu->loadavg_timer, loadavg_polling_frequency, HRTIMER_MODE_ABS_SOFT);
> >
> >       return 0;
> >  }
> > @@ -1787,6 +1848,7 @@ static int etnaviv_gpu_platform_probe(struct platform_device *pdev)
> >       gpu->dev = &pdev->dev;
> >       mutex_init(&gpu->lock);
> >       mutex_init(&gpu->fence_lock);
> > +     spin_lock_init(&gpu->loadavg_spinlock);
> >
> >       /* Map registers: */
> >       gpu->mmio = devm_platform_ioremap_resource(pdev, 0);
> > diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
> > index 85eddd492774..881f071f640e 100644
> > --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
> > +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
> > @@ -10,6 +10,8 @@
> >  #include "etnaviv_gem.h"
> >  #include "etnaviv_mmu.h"
> >  #include "etnaviv_drv.h"
> > +#include "etnaviv_sma.h"
> > +#include "state_hi.xml.h"
> >
> >  struct etnaviv_gem_submit;
> >  struct etnaviv_vram_mapping;
> > @@ -91,6 +93,33 @@ struct clk;
> >
> >  #define ETNA_NR_EVENTS 30
> >
> > +DECLARE_SMA(loadavg, 100)
> > +
> > +static const struct {
> > +    const char *name;
> > +    u32 bit;
> > +} etna_idle_module_names[] = {
>
> Drop the _names prefix. This isn't just enumerating names, but also the
> bit positions in the state register.
>

Okay.

-- 
greets
--
Christian Gmeiner, MSc

https://christian-gmeiner.info/privacypolicy



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux