Some basic cleanups for kernel-doc errors or missing documentation parameters. Warnings generated by ./scripts/kernel-doc drivers/gpu/drm/drm_edid.c >Kerr Warning(drivers/gpu/drm/drm_edid.c:997): No description found for parameter 'adapter' Warning(drivers/gpu/drm/drm_edid.c:997): No description found for parameter 'buf' Warning(drivers/gpu/drm/drm_edid.c:997): No description found for parameter 'block' Warning(drivers/gpu/drm/drm_edid.c:997): No description found for parameter 'len' Warning(drivers/gpu/drm/drm_edid.c:1138): No description found for parameter 'adapter' Warning(drivers/gpu/drm/drm_edid.c:1467): No description found for parameter 'connector' Warning(drivers/gpu/drm/drm_edid.c:1467): No description found for parameter 'edid' Warning(drivers/gpu/drm/drm_edid.c:1467): No description found for parameter 'revision' Warning(drivers/gpu/drm/drm_edid.c:1467): Excess function parameter 'timing_level' description in 'drm_mode_std' Warning(drivers/gpu/drm/drm_edid.c:2010): No description found for parameter 'connector' Warning(drivers/gpu/drm/drm_edid.c:2072): No description found for parameter 'connector' Warning(drivers/gpu/drm/drm_edid.c:2237): No description found for parameter 'edid' Warning(drivers/gpu/drm/drm_edid.c:2616): No description found for parameter 'edid' Warning(drivers/gpu/drm/drm_edid.c:2658): No description found for parameter 'edid' Cc: David Airlie <airlied@xxxxxxxx> Cc: Dave Airlie <airlied@xxxxxxxxxx> Cc: Adam Jackson <ajax@xxxxxxxxxx> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx Signed-off-by: Nishanth Menon <nm@xxxxxx> --- V2: review comments incorporated V1: http://marc.info/?t=136214115900005&r=1&w=2 It does seem the drm_edid.c could do with more documentation cleanup, but I have stayed with the bare minimum. the above error is based off: master de1a226 Merge tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux from: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git defconfig used: omap2plus_defconfig Disclaimer: I am no drm expert, and I tried to use my best judgement about what the meaning of the parameters might be, hope it helps. drivers/gpu/drm/drm_edid.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index c194f4e..bd864b5 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -982,14 +982,14 @@ EXPORT_SYMBOL(drm_edid_is_valid); #define DDC_SEGMENT_ADDR 0x30 /** - * Get EDID information via I2C. - * - * \param adapter : i2c device adaptor - * \param buf : EDID data buffer to be filled - * \param len : EDID data buffer length - * \return 0 on success or -1 on failure. + * drm_do_probe_ddc_edid() - Get EDID information via I2C. + * @adapter: i2c device adapter + * @buf: EDID data buffer to be filled + * @block: EDID block to get + * @len: EDID data buffer length * * Try to fetch EDID information by calling i2c driver function. + * Return 0 on success or -1 on failure. */ static int drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf, @@ -1128,10 +1128,10 @@ out: } /** - * Probe DDC presence. + * drm_probe_ddc() - Probe DDC presence + * @adapter: i2c device adapter * - * \param adapter : i2c device adaptor - * \return 1 on success + * returns 1 on success */ bool drm_probe_ddc(struct i2c_adapter *adapter) @@ -1455,8 +1455,10 @@ bad_std_timing(u8 a, u8 b) /** * drm_mode_std - convert standard mode info (width, height, refresh) into mode + * @connector: attached connector + * @edid: EDID data * @t: standard timing params - * @timing_level: standard timing level + * @revision: EDID revision * * Take the standard timing params (in this case width, aspect, and refresh) * and convert them into a real mode using CVT/GTF/DMT. @@ -2000,6 +2002,7 @@ do_established_modes(struct detailed_timing *timing, void *c) /** * add_established_modes - get est. modes from EDID and add them + * @connector: attached connector * @edid: EDID block to scan * * Each EDID block contains a bitmap of the supported "established modes" list @@ -2062,6 +2065,7 @@ do_standard_modes(struct detailed_timing *timing, void *c) /** * add_standard_modes - get std. modes from EDID and add them + * @connector: attached connector * @edid: EDID block to scan * * Standard modes can be calculated using the appropriate standard (DMT, @@ -2192,7 +2196,7 @@ do_detailed_mode(struct detailed_timing *timing, void *c) } } -/* +/** * add_detailed_modes - Add modes from detailed timings * @connector: attached connector * @edid: EDID block to scan @@ -2231,7 +2235,8 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid, #define EDID_CEA_VCDB_QS (1 << 6) /** - * Search EDID for CEA extension block. + * drm_find_cea_extension() - Search EDID for CEA extension block. + * @edid: EDID data */ u8 *drm_find_cea_extension(struct edid *edid) { @@ -2604,6 +2609,7 @@ EXPORT_SYMBOL(drm_detect_hdmi_monitor); /** * drm_detect_monitor_audio - check monitor audio capability + * @edid: EDID data * * Monitor should have CEA extension block. * If monitor has 'basic audio', but no CEA audio blocks, it's 'basic @@ -2649,6 +2655,7 @@ EXPORT_SYMBOL(drm_detect_monitor_audio); /** * drm_rgb_quant_range_selectable - is RGB quantization range selectable? + * @edid: EDID data * * Check whether the monitor reports the RGB quantization range selection * as supported. The AVI infoframe can then be used to inform the monitor -- 1.7.9.5 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
