On 14:43-20130301, Ville Syrjälä wrote: > On Thu, Feb 28, 2013 at 05:13:09PM -0600, Nishanth Menon wrote: [..] > > @@ -982,14 +982,14 @@ EXPORT_SYMBOL(drm_edid_is_valid); > > > > #define DDC_SEGMENT_ADDR 0x30 > > /** > > - * Get EDID information via I2C. > > - * > > - * \param adapter : i2c device adaptor > > - * \param buf : EDID data buffer to be filled > > - * \param len : EDID data buffer length > > - * \return 0 on success or -1 on failure. > > + * drm_do_probe_ddc_edid() - Get EDID information via I2C. > > + * @adapter: i2c device adaptor > > nit: adapter vs. adaptor Thanks for catching it. > > > + * @buf: EDID data buffer to be filled > > + * @block: EDID block to get > > + * @len: EDID data buffer length > > * > > * Try to fetch EDID information by calling i2c driver function. > > + * Return 0 on success or -1 on failure. > > */ > > static int > > drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf, > > @@ -1128,10 +1128,10 @@ out: > > } > > > > /** > > - * Probe DDC presence. > > + * drm_probe_ddc() - Probe DDC presence > > + * @adapter: i2c device adaptor > > * > > - * \param adapter : i2c device adaptor > > - * \return 1 on success > > + * returns 1 on success > > */ > > bool > > drm_probe_ddc(struct i2c_adapter *adapter) > > @@ -1455,8 +1455,10 @@ bad_std_timing(u8 a, u8 b) > > > > /** > > * drm_mode_std - convert standard mode info (width, height, refresh) into mode > > + * @connector: connector corresponding to the HDMI/DP sink > > EDID isn't limited to HDMI/DP. > [..] > > > > /** > > * drm_rgb_quant_range_selectable - is RGB quantization range selectable? > > + * @edid: EDID data > > nit: Different description for the same thing between this and the previous > hunk. agreed. How about just EDID data? -- Regards, Nishanth Menon _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
