Hi, Nancy: On Mon, 2022-06-20 at 17:19 +0800, Nancy.Lin wrote: > Add merge new advance config API. The original merge API is > mtk_ddp_comp_funcs function prototype. The API interface parameters > cannot be modified, so add a new config API for extension. This is > the preparation for ovl_adaptor merge control. Applied to mediatek-drm-next [1], thanks. [1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next Regards, CK > > Signed-off-by: Nancy.Lin <nancy.lin@xxxxxxxxxxxx> > Reviewed-by: Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx> > Reviewed-by: AngeloGioacchino Del Regno < > angelogioacchino.delregno@xxxxxxxxxxxxx> > Tested-by: AngeloGioacchino Del Regno < > angelogioacchino.delregno@xxxxxxxxxxxxx> > Tested-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx> > --- > drivers/gpu/drm/mediatek/mtk_disp_drv.h | 3 ++ > drivers/gpu/drm/mediatek/mtk_disp_merge.c | 52 ++++++++++++++++++++- > -- > 2 files changed, 48 insertions(+), 7 deletions(-) > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h > b/drivers/gpu/drm/mediatek/mtk_disp_drv.h > index 2cd1c660ace3..e847e90f436d 100644 > --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h > +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h > @@ -63,6 +63,9 @@ void mtk_merge_config(struct device *dev, unsigned > int width, > unsigned int bpc, struct cmdq_pkt *cmdq_pkt); > void mtk_merge_start(struct device *dev); > void mtk_merge_stop(struct device *dev); > +void mtk_merge_advance_config(struct device *dev, unsigned int l_w, > unsigned int r_w, > + unsigned int h, unsigned int vrefresh, > unsigned int bpc, > + struct cmdq_pkt *cmdq_pkt); > > void mtk_ovl_bgclr_in_on(struct device *dev); > void mtk_ovl_bgclr_in_off(struct device *dev); > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_merge.c > b/drivers/gpu/drm/mediatek/mtk_disp_merge.c > index 45face638153..40da0555416d 100644 > --- a/drivers/gpu/drm/mediatek/mtk_disp_merge.c > +++ b/drivers/gpu/drm/mediatek/mtk_disp_merge.c > @@ -17,6 +17,7 @@ > #define DISP_REG_MERGE_CTRL 0x000 > #define MERGE_EN 1 > #define DISP_REG_MERGE_CFG_0 0x010 > +#define DISP_REG_MERGE_CFG_1 0x014 > #define DISP_REG_MERGE_CFG_4 0x020 > #define DISP_REG_MERGE_CFG_10 0x038 > /* no swap */ > @@ -25,9 +26,12 @@ > #define DISP_REG_MERGE_CFG_12 0x040 > #define CFG_10_10_1PI_2PO_BUF_MODE 6 > #define CFG_10_10_2PI_2PO_BUF_MODE 8 > +#define CFG_11_10_1PI_2PO_MERGE 18 > #define FLD_CFG_MERGE_MODE GENMASK(4, 0) > #define DISP_REG_MERGE_CFG_24 0x070 > #define DISP_REG_MERGE_CFG_25 0x074 > +#define DISP_REG_MERGE_CFG_26 0x078 > +#define DISP_REG_MERGE_CFG_27 0x07c > #define DISP_REG_MERGE_CFG_36 0x0a0 > #define ULTRA_EN BIT(0) > #define PREULTRA_EN BIT(4) > @@ -98,12 +102,19 @@ static void mtk_merge_fifo_setting(struct > mtk_disp_merge *priv, > void mtk_merge_config(struct device *dev, unsigned int w, > unsigned int h, unsigned int vrefresh, > unsigned int bpc, struct cmdq_pkt *cmdq_pkt) > +{ > + mtk_merge_advance_config(dev, w, 0, h, vrefresh, bpc, > cmdq_pkt); > +} > + > +void mtk_merge_advance_config(struct device *dev, unsigned int l_w, > unsigned int r_w, > + unsigned int h, unsigned int vrefresh, > unsigned int bpc, > + struct cmdq_pkt *cmdq_pkt) > { > struct mtk_disp_merge *priv = dev_get_drvdata(dev); > unsigned int mode = CFG_10_10_1PI_2PO_BUF_MODE; > > - if (!h || !w) { > - dev_err(dev, "%s: input width(%d) or height(%d) is > invalid\n", __func__, w, h); > + if (!h || !l_w) { > + dev_err(dev, "%s: input width(%d) or height(%d) is > invalid\n", __func__, l_w, h); > return; > } > > @@ -112,14 +123,41 @@ void mtk_merge_config(struct device *dev, > unsigned int w, > mode = CFG_10_10_2PI_2PO_BUF_MODE; > } > > - mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv- > >regs, > + if (r_w) > + mode = CFG_11_10_1PI_2PO_MERGE; > + > + mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, priv- > >regs, > DISP_REG_MERGE_CFG_0); > - mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv- > >regs, > + mtk_ddp_write(cmdq_pkt, h << 16 | r_w, &priv->cmdq_reg, priv- > >regs, > + DISP_REG_MERGE_CFG_1); > + mtk_ddp_write(cmdq_pkt, h << 16 | (l_w + r_w), &priv->cmdq_reg, > priv->regs, > DISP_REG_MERGE_CFG_4); > - mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv- > >regs, > + /* > + * DISP_REG_MERGE_CFG_24 is merge SRAM0 w/h > + * DISP_REG_MERGE_CFG_25 is merge SRAM1 w/h. > + * If r_w > 0, the merge is in merge mode (input0 and input1 > merge together), > + * the input0 goes to SRAM0, and input1 goes to SRAM1. > + * If r_w = 0, the merge is in buffer mode, the input goes > through SRAM0 and > + * then to SRAM1. Both SRAM0 and SRAM1 are set to the same > size. > + */ > + mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, priv- > >regs, > DISP_REG_MERGE_CFG_24); > - mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv- > >regs, > - DISP_REG_MERGE_CFG_25); > + if (r_w) > + mtk_ddp_write(cmdq_pkt, h << 16 | r_w, &priv->cmdq_reg, > priv->regs, > + DISP_REG_MERGE_CFG_25); > + else > + mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, > priv->regs, > + DISP_REG_MERGE_CFG_25); > + > + /* > + * DISP_REG_MERGE_CFG_26 and DISP_REG_MERGE_CFG_27 is only used > in LR merge. > + * Only take effect when the merge is setting to merge mode. > + */ > + mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, priv- > >regs, > + DISP_REG_MERGE_CFG_26); > + mtk_ddp_write(cmdq_pkt, h << 16 | r_w, &priv->cmdq_reg, priv- > >regs, > + DISP_REG_MERGE_CFG_27); > + > mtk_ddp_write_mask(cmdq_pkt, SWAP_MODE, &priv->cmdq_reg, priv- > >regs, > DISP_REG_MERGE_CFG_10, FLD_SWAP_MODE); > mtk_ddp_write_mask(cmdq_pkt, mode, &priv->cmdq_reg, priv->regs,