On 24/06/2022 20:19, Marek Vasut wrote:
The DSI lane count can be accessed via the dsi device pointer,
make use of that. No functional change.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Maxime Ripard <maxime@xxxxxxxxxx>
Cc: Robert Foss <robert.foss@xxxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/tc358767.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index e4dd4f05f94b3..44f32bf483c51 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -288,7 +288,6 @@ struct tc_data {
struct drm_connector connector;
struct mipi_dsi_device *dsi;
- u8 dsi_lanes;
/* link settings */
struct tc_edp_link link;
@@ -1261,7 +1260,7 @@ static int tc_dsi_rx_enable(struct tc_data *tc)
regmap_write(tc->regmap, PPI_TX_RX_TA, TTA_GET | TTA_SURE);
regmap_write(tc->regmap, PPI_LPTXTIMECNT, LPX_PERIOD);
- value = ((LANEENABLE_L0EN << tc->dsi_lanes) - LANEENABLE_L0EN) |
+ value = ((LANEENABLE_L0EN << tc->dsi->lanes) - LANEENABLE_L0EN) |
LANEENABLE_CLEN;
regmap_write(tc->regmap, PPI_LANEENABLE, value);
regmap_write(tc->regmap, DSI_LANEENABLE, value);
@@ -1909,8 +1908,7 @@ static int tc_mipi_dsi_host_attach(struct tc_data *tc)
tc->dsi = dsi;
- tc->dsi_lanes = dsi_lanes;
- dsi->lanes = tc->dsi_lanes;
+ dsi->lanes = dsi_lanes;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
