On Fri, Jun 17, 2022 at 10:37:07PM +0100, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
>
> ilitek,ili9341.txt was replaced by ilitek,ili9341.yaml but the txt
panel/ilitek,ili9341.yaml
> binding was not deleted. Do so.
>
> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
> .../bindings/display/ilitek,ili9341.txt | 27 -------------------
> 1 file changed, 27 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt
>
> diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> deleted file mode 100644
> index 169b32e4ee4e..000000000000
> --- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -Ilitek ILI9341 display panels
> -
> -This binding is for display panels using an Ilitek ILI9341 controller in SPI
> -mode.
> -
> -Required properties:
> -- compatible: "adafruit,yx240qv29", "ilitek,ili9341"
"adafruit,yx240qv29" is not in the schema.
> -- dc-gpios: D/C pin
> -- reset-gpios: Reset pin
Neither is this. It is in panel-common.yaml, but 'unevaluatedProperties'
needs to be used instead to allow it. Or add 'reset-gpios: true'.
> -
> -The node for this driver must be a child node of a SPI controller, hence
> -all mandatory properties described in ../spi/spi-bus.txt must be specified.
> -
> -Optional properties:
> -- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
> -- backlight: phandle of the backlight device attached to the panel
> -
> -Example:
> - display@0{
> - compatible = "adafruit,yx240qv29", "ilitek,ili9341";
> - reg = <0>;
> - spi-max-frequency = <32000000>;
> - dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> - reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
> - rotation = <270>;
> - backlight = <&backlight>;
> - };
> --
> 2.36.1
>
>
