Re: [PATCH v2 02/15] dt-bindings: power: supply: Add Mediatek MT6370 Charger

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/06/2022 03:19, ChiaEn Wu wrote:
> Hi Krzysztof,
> 
> Thanks for your helpful comments! I have so some questions want to ask
> you below.
> 
> Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> 於 2022年6月17日 週五 清晨5:05寫道:
>>
>> On 13/06/2022 04:11, ChiaEn Wu wrote:
>>> From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
>>>
>>> Add Mediatek MT6370 Charger binding documentation.
>>>
>>> Signed-off-by: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
>>> ---
>>>  .../power/supply/mediatek,mt6370-charger.yaml | 60 +++++++++++++++++++
>>>  1 file changed, 60 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
>>> new file mode 100644
>>> index 000000000000..b63553ebb15b
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
>>> @@ -0,0 +1,60 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Mediatek MT6370 Battery Charger
>>> +
>>> +maintainers:
>>> +  - ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
>>> +
>>> +description: |
>>> +  This module is part of the MT6370 MFD device.
>>> +  Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
>>> +
>>> +properties:
>>> +  compatible:
>>> +    const: mediatek,mt6370-charger
>>> +
>>> +  interrupts:
>>> +    description: |
>>> +      Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ
>>> +      "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D"
>>> +      are required.
>>> +    items:
>>> +      - description: BC1.2 done irq
>>> +      - description: usb plug in irq
>>> +      - description: mivr irq
>>> +
>>> +  interrupt-names:
>>> +    items:
>>> +      - const: attach_i
>>> +      - const: uvp_d_evt
>>> +      - const: mivr
>>> +
>>> +  io-channels:
>>> +    description: |
>>> +      Use ADC channel to read vbus, ibus, ibat, etc., info. Ibus ADC channel
>>> +      is required.
>>
>> Add io-channel-names and describe each item - what type of ADC it is
>> expected to be.
>>
> 
> I'm afraid I might not be understanding what you mean.
> I will try to add some text in "description" and "io-channel-names", like below
> ----------------------------------
> io-channels:
>   description: |
>     Use ADC channel to read VBUS, IBUS, IBAT, etc., info. Ibus ADC channel
>     is required. It can be seen in
> include/dt-bindings/iio/adc/mediatek,mt6370_adc.h
>   minItems: 1
>   maxItems: 9
> 
> io-channel-names:
>   items:
>     - const: vbusdiv5
>     - const: vbusdiv2

Almost. The best would be something like this:
Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
so also "items" with description under "io-channels". You need to skip
maxItems in such case (keep minItems).

>     - ...
> ----------------------------------
> Did these modifications meet your expectations?
> 
>>> +    minItems: 1
>>> +    maxItems: 9
>>> +
>>> +  usb-otg-vbus-regulator:
>>> +    type: object
>>> +    description: OTG boost regulator.
>>> +    $ref: /schemas/regulator/regulator.yaml#
>>
>> unevaluatedProperties: false
> 
> I will add this in the next patch.
> 
>>
>>> +
>>> +    properties:
>>> +      enable-gpio:
>>
>> "gpios", so:
>> enable-gpios
> 
> If this otg regulator only uses one GPIO Pin, do I still need to
> change to "gpios"?

Yes, because "gpios" is the preferred suffix. This is requirement for
all such properties. enable-gpios are also documented here:
Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml


> If so, I will refine it along with the regulator "enable-gpio" in MFD
> dt-binding.

Yes, there it should be "enable-gpios" as well.




Best regards,
Krzysztof



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux