Re: [PATCH v2 7/7] drm/bridge: anx7625: Add typec_mux_set callback function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi AngeloGioacchino,


On Tue, Jun 14, 2022 at 4:15 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno@xxxxxxxxxxxxx> wrote:
>
> Il 09/06/22 20:09, Prashant Malani ha scritto:
> > From: Pin-Yen Lin <treapking@xxxxxxxxxxxx>
> >
> > Add the callback function when the driver receives state
> > changes of the Type-C port. The callback function configures the
> > crosspoint switch of the anx7625 bridge chip, which can change the
> > output pins of the signals according to the port state.
> >
> > Signed-off-by: Pin-Yen Lin <treapking@xxxxxxxxxxxx>
> > Signed-off-by: Prashant Malani <pmalani@xxxxxxxxxxxx>
> > ---
> >
> > Changes since v2:
> > - No changes.
> >
> >   drivers/gpu/drm/bridge/analogix/anx7625.c | 58 +++++++++++++++++++++++
> >   drivers/gpu/drm/bridge/analogix/anx7625.h | 13 +++++
> >   2 files changed, 71 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index d41a21103bd3..2c308d12fab2 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -15,6 +15,7 @@
> >   #include <linux/regulator/consumer.h>
> >   #include <linux/slab.h>
> >   #include <linux/types.h>
> > +#include <linux/usb/typec_dp.h>
> >   #include <linux/usb/typec_mux.h>
> >   #include <linux/workqueue.h>
> >
> > @@ -2582,9 +2583,66 @@ static void anx7625_runtime_disable(void *data)
> >       pm_runtime_disable(data);
> >   }
> >
> > +static void anx7625_set_crosspoint_switch(struct anx7625_data *ctx,
> > +                                       enum typec_orientation orientation)
> > +{
> > +     if (orientation == TYPEC_ORIENTATION_NORMAL) {
> > +             anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> > +                               SW_SEL1_SSRX_RX1 | SW_SEL1_DPTX0_RX2);
> > +             anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> > +                               SW_SEL2_SSTX_TX1 | SW_SEL2_DPTX1_TX2);
> > +     } else if (orientation == TYPEC_ORIENTATION_REVERSE) {
> > +             anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_0,
> > +                               SW_SEL1_SSRX_RX2 | SW_SEL1_DPTX0_RX1);
> > +             anx7625_reg_write(ctx, ctx->i2c.tcpc_client, TCPC_SWITCH_1,
> > +                               SW_SEL2_SSTX_TX2 | SW_SEL2_DPTX1_TX1);
> > +     }
> > +}
> > +
> > +static void anx7625_typec_two_ports_update(struct anx7625_data *ctx)
> > +{
> > +     if (ctx->typec_ports[0].dp_connected && ctx->typec_ports[1].dp_connected)
> > +             /* Both ports available, do nothing to retain the current one. */
> > +             return;
> > +     else if (ctx->typec_ports[0].dp_connected)
> > +             anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_NORMAL);
> > +     else if (ctx->typec_ports[1].dp_connected)
> > +             anx7625_set_crosspoint_switch(ctx, TYPEC_ORIENTATION_REVERSE);
> > +}
> > +
> >   static int anx7625_typec_mux_set(struct typec_mux_dev *mux,
> >                                struct typec_mux_state *state)
> >   {
> > +     struct anx7625_port_data *data = typec_mux_get_drvdata(mux);
> > +     struct anx7625_data *ctx = data->ctx;
> > +     struct device *dev = &ctx->client->dev;
> > +
> > +     bool old_dp_connected = (ctx->typec_ports[0].dp_connected ||
> > +                              ctx->typec_ports[1].dp_connected);
>
> So the old connection state is "either port0 or port1 are currently connected"...
>
> > +     bool new_dp_connected;
> > +
> > +     if (ctx->num_typec_switches == 1)
> > +             return 0;
> > +
> > +     dev_dbg(dev, "mux_set dp_connected: c0=%d, c1=%d\n",
> > +             ctx->typec_ports[0].dp_connected, ctx->typec_ports[1].dp_connected);
> > +
> > +     data->dp_connected = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
> > +                           state->alt->mode == USB_TYPEC_DP_MODE);
> > + > + new_dp_connected = (ctx->typec_ports[0].dp_connected ||
> > +                         ctx->typec_ports[1].dp_connected);
>
> ...and the new connection state is the same as the old one, because I don't see
> anything that could ever modify it in this function's flow, until reaching this
> assignment.

The typec mux driver data (`struct anx7625_port_data *data =
typec_mux_get_drvdata(mux)`) is set to one of the
`ctx->typec_ports[*]` in `anx7625_register_mode_switch` (see patch 6
of this series).

So, the `data->dp_connected = ...` assignment may change the new
connection state.

Best regards,
Pin-yen

>
> > +
> > +     /* dp on, power on first */
> > +     if (!old_dp_connected && new_dp_connected)
> > +             pm_runtime_get_sync(dev);
>
> ...so that will never happen...
>
> > +
> > +     anx7625_typec_two_ports_update(ctx);
> > +
> > +     /* dp off, power off last */
> > +     if (old_dp_connected && !new_dp_connected)
> > +             pm_runtime_put_sync(dev);
>
> ...and same here.
>
> Regards,
> Angelo



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux