From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> If the controller isn't clocked or its domain powered up, the register accesses will either stall the CPU or return garbage, respectively. Thus, we had a warning in our register access function to complain when that kind of risky accesses were performed. In order to check the runtime_pm power state, we were using pm_runtime_active(), but it turns out that it will become active only once the runtime_resume hook has been executed. This prevents us from doing any WARN-free register access in our runtime_resume() implementation, while this is valid. Let's switch to pm_runtime_status_suspended() instead. Fixes: 14e193b95604 ("drm/vc4: hdmi: Warn if we access the controller while disabled") Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> --- drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_hdmi_regs.h b/drivers/gpu/drm/vc4/vc4_hdmi_regs.h index 549cc63dab39..0198de96c7b2 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi_regs.h +++ b/drivers/gpu/drm/vc4/vc4_hdmi_regs.h @@ -423,7 +423,7 @@ static inline u32 vc4_hdmi_read(struct vc4_hdmi *hdmi, const struct vc4_hdmi_variant *variant = hdmi->variant; void __iomem *base; - WARN_ON(!pm_runtime_active(&hdmi->pdev->dev)); + WARN_ON(pm_runtime_status_suspended(&hdmi->pdev->dev)); if (reg >= variant->num_registers) { dev_warn(&hdmi->pdev->dev, @@ -453,7 +453,7 @@ static inline void vc4_hdmi_write(struct vc4_hdmi *hdmi, lockdep_assert_held(&hdmi->hw_lock); - WARN_ON(!pm_runtime_active(&hdmi->pdev->dev)); + WARN_ON(pm_runtime_status_suspended(&hdmi->pdev->dev)); if (reg >= variant->num_registers) { dev_warn(&hdmi->pdev->dev, -- 2.36.1