Thanks Wayne for clarifying.
I will correct the typos and submit the patch again.
-----Original Message-----
From: Lin, Wayne <Wayne.Lin@xxxxxxx>
Sent: Monday, June 13, 2022 3:25 PM
To: Tseng, William <william.tseng@xxxxxxxxx>; dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>; Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>; Lee, Shawn C <shawn.c.lee@xxxxxxxxx>
Subject: RE: [PATCH v2] drm/edid: ignore the CEA modes not defined in CEA-861-D
[AMD Official Use Only - General]
Thanks William!
After fixing few typos below, feel free to add:
Acked-by: Wayne Lin <Wayne.Lin@xxxxxxx>
> -----Original Message-----
> From: William Tseng <william.tseng@xxxxxxxxx>
> Sent: Monday, June 13, 2022 12:27 PM
> To: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> Cc: William Tseng <william.tseng@xxxxxxxxx>; Ville Syrjälä
> <ville.syrjala@xxxxxxxxxxxxxxx>; Jani Nikula
> <jani.nikula@xxxxxxxxxxxxxxx>; Lin, Wayne <Wayne.Lin@xxxxxxx>; Lee
> Shawn C <shawn.c.lee@xxxxxxxxx>
> Subject: [PATCH v2] drm/edid: ignore the CEA modes not defined in CEA-
> 861-D
>
> This is a workaround for HDMI 1.4 sink which has a CEA mode with
> higher vic than what is defined in CEA-861-D.
>
> As an example, a HDMI 1.4 sink has the video format 2560x1080p to be
> displayed and the video format is indicated by both SVD (with vic 90
> and pictuure aspect ratio 64:27) and DTD. When connecting to such
> sink, source
Typo - picture
> can't output the video format in SVD because an error is returned by
> drm_hdmi_avi_infoframe_from_display_mode(), which can't fill the
> infoframe with pictuure aspect ratio 64:27 and the vic, which is
> originally 90
Typo - picture
> and is changed to 0 by drm_mode_cea_vic().
>
> To work around it, do not set the vic 0 so the corresponding mode may
> be accepted in drm_hdmi_avi_infoframe_from_display_mode() and be
> dispalyed.
>
> Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Cc: Wayne Lin <waynelin@xxxxxxx>
> Cc: Lee Shawn C <shawn.c.lee@xxxxxxxxx>
> Signed-off-by: William Tseng <william.tseng@xxxxxxxxx>
> ---
> drivers/gpu/drm/drm_edid.c | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index bc43e1b32092..a4582627ec9d 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -5876,7 +5876,8 @@ static u8 drm_mode_hdmi_vic(const struct
> drm_connector *connector, }
>
> static u8 drm_mode_cea_vic(const struct drm_connector *connector,
> - const struct drm_display_mode *mode)
> + const struct drm_display_mode *mode,
> + bool is_hdmi2_sink)
> {
> u8 vic;
>
> @@ -5896,7 +5897,7 @@ static u8 drm_mode_cea_vic(const struct
> drm_connector *connector,
> * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we
> * have to make sure we dont break HDMI 1.4 sinks.
> */
> - if (!is_hdmi2_sink(connector) && vic > 64)
> + if (!is_hdmi2_sink && vic > 64)
> return 0;
>
> return vic;
> @@ -5927,7 +5928,7 @@
> drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe
> *frame,
> if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> frame->pixel_repeat = 1;
>
> - vic = drm_mode_cea_vic(connector, mode);
> + vic = drm_mode_cea_vic(connector, mode, true);
> hdmi_vic = drm_mode_hdmi_vic(connector, mode);
>
> frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE; @@ -
> 5971,7 +5972,8 @@ drm_hdmi_avi_infoframe_from_display_mode(struct
> hdmi_avi_infoframe *frame,
> picture_aspect = HDMI_PICTURE_ASPECT_NONE;
> }
>
> - frame->video_code = vic;
> + frame->video_code = drm_mode_cea_vic(connector, mode,
> + is_hdmi2_sink(connector));
> frame->picture_aspect = picture_aspect;
> frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
> frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
> --
> 2.17.1
