Hi, Rex:
On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote:
> From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
>
> This patch adds a DisplayPort driver for the Mediatek mt8195 SoC.
>
> It supports the mt8195, the embedded DisplayPort units. It offers
> DisplayPort 1.4 with up to 4 lanes.
>
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so
> that
> both can work with the same register range. The phy driver sets
> device
> data that is read by the parent to get the phy device that can be
> used
> to control the phy properties.
>
> This driver is based on an initial version by
> Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>.
>
> Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
> ---
[snip]
> +
> +static bool mtk_dp_set_swing_pre_emphasis(struct mtk_dp *mtk_dp, int
> lane_num,
> + int swing_val, int
> preemphasis)
The return value is never processed, so let this function to be void.
Regards,
CK
> +{
> + int ret;
> +
> + u32 lane_shift = lane_num * DP_TX1_VOLT_SWING_SHIFT;
> +
> + if (lane_num < 0 || lane_num > 3)
lane_num < 0 would not happen. lane_num > 3 only if device tree max
lane is wrong. So I would like to checkout max lane when parsing device
tree instead of checking here.
> + return false;
> +
> + dev_dbg(mtk_dp->dev,
> + "link training swing_val= 0x%x, preemphasis = 0x%x\n",
> + swing_val, preemphasis);
> +
> + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_SWING_EMP,
> + swing_val << (DP_TX0_VOLT_SWING_SHIFT
> + lane_shift),
> + DP_TX0_VOLT_SWING_MASK << lane_shift);
> + if (ret)
> + return ret;
> + ret = mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_SWING_EMP,
> + preemphasis << (DP_TX0_PRE_EMPH_SHIFT
> + lane_shift),
> + DP_TX0_PRE_EMPH_MASK << lane_shift);
> +
> + return !ret;
> +}
> +
