Re: [REGRESSION] VGA output with AST 2600 graphics.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

Am 07.06.22 um 13:02 schrieb Thorsten Leemhuis:
Hi, this is your Linux kernel regression tracker.

On 01.06.22 14:29, Jocelyn Falempe wrote:
On 01/06/2022 12:33, Thomas Zimmermann wrote:
Am 01.06.22 um 11:33 schrieb Jocelyn Falempe:

I've found a regression in the ast driver, for AST2600 hardware.

before the upstream commit f9bd00e0ea9d
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f9bd00e0ea9d9b04140aa969a9a13ad3597a1e4e


The ast driver handled AST 2600 chip like an AST 2500.

After this commit, it uses some default values, more like the older
AST chip.

There are a lot of places in the driver like this:
https://elixir.bootlin.com/linux/v5.18.1/source/drivers/gpu/drm/ast/ast_post.c#L82

where it checks for (AST2300 || AST2400 || AST2500) but not for AST2600.

This makes the VGA output, to be blurred and flickered with whites
lines on AST2600.

The issue is present since v5.11

For v5.11~v5.17 I propose a simple workaround (as there are no other
reference to AST2600 in the driver):
--- a/drivers/gpu/drm/ast/ast_main.c
+++ b/drivers/gpu/drm/ast/ast_main.c
@@ -146,7 +146,8 @@ static int ast_detect_chip(struct drm_device
*dev, bool *need_post)

       /* Identify chipset */
       if (pdev->revision >= 0x50) {
-        ast->chip = AST2600;
+        /* Workaround to use the same codepath for AST2600 */
+        ast->chip = AST2500;

The whole handling of different models in this driver is broken by
design and needs to be replaced.  I don't have much of the affected
hardware, so such things are going slowly. :(

For an intermediate fix, it would be better to change all tests for
AST2500 to include AST2600 as well. There aren't too many IIRC.

I feel a bit uncomfortable doing this, because I don't know if this
settings are good for AST2600 or not. I just know that AST2500 settings
are better than the "default".

KuoHsiang Chou, you wrote the commit causing this regression. Could you
maybe take care of the idea Thomas outlined to get this fixed relative
quickly? Or do you have a better idea?

Thanks for the reminder. I've sent out a patch for this problem. [1]

Best regards
Thomas

[1] https://lore.kernel.org/dri-devel/20220607120248.31716-1-tzimmermann@xxxxxxx/T/#u


Also it may not apply cleanly up to v5.11

FWIW, 5.11 is EOL anyway.

I will do a test patch and see what it gives.

Another solution would be to just revert f9bd00e0ea9d for v5.11 to v5.17 ?

That might cause a regression for users that depend on something
supported thx to this change. :-/

Ciao, Thorsten

--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Ivo Totev

Attachment: OpenPGP_signature
Description: OpenPGP digital signature


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux