To return the orientation property to drm/kms driver.
Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-ilitek-ili9881c.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
index ba30d11547ad..c098a0ed6be7 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9881c.c
@@ -853,17 +853,31 @@ static int ili9881c_get_modes(struct drm_panel *panel,
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
+ /*
+ * drm drivers are expected to call drm_panel_get_orientation() to get
+ * panel's orientation then drm_connector_set_panel_orientation() to
+ * set the property before drm_dev_register(). Otherwise there will be
+ * a WARN_ON if orientation is set after drm is registered.
+ */
drm_connector_set_panel_orientation(connector, ctx->orientation);
return 1;
}
+static enum drm_panel_orientation ili9881c_get_orientation(struct drm_panel *panel)
+{
+ struct ili9881c *ctx = panel_to_ili9881c(panel);
+
+ return ctx->orientation;
+}
+
static const struct drm_panel_funcs ili9881c_funcs = {
.prepare = ili9881c_prepare,
.unprepare = ili9881c_unprepare,
.enable = ili9881c_enable,
.disable = ili9881c_disable,
.get_modes = ili9881c_get_modes,
+ .get_orientation = ili9881c_get_orientation,
};
static int ili9881c_dsi_probe(struct mipi_dsi_device *dsi)
--
2.36.1.255.ge46751e96f-goog
