Re: [PATCH v2 08/11] drm/msm/dsi_phy_28nm: Replace parent names with clk_hw pointers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2 Jun 2022 at 01:08, Marijn Suijten
<marijn.suijten@xxxxxxxxxxxxxx> wrote:
>
> parent_hw pointers are easier to manage and cheaper to use than
> repeatedly formatting the parent name and subsequently leaving the clk
> framework to perform lookups based on that name.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

> ---
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 50 ++++++++++------------
>  1 file changed, 23 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> index 7d3cabeca743..04411fefb808 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> @@ -519,17 +519,17 @@ static int dsi_28nm_pll_restore_state(struct msm_dsi_phy *phy)
>
>  static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **provided_clocks)
>  {
> -       char clk_name[32], parent1[32], parent2[32], vco_name[32];
> +       char clk_name[32];
>         struct clk_init_data vco_init = {
>                 .parent_data = &(const struct clk_parent_data) {
>                         .fw_name = "ref", .name = "xo",
>                 },
>                 .num_parents = 1,
> -               .name = vco_name,
> +               .name = clk_name,
>                 .flags = CLK_IGNORE_UNUSED,
>         };
>         struct device *dev = &pll_28nm->phy->pdev->dev;
> -       struct clk_hw *hw;
> +       struct clk_hw *hw, *analog_postdiv, *indirect_path_div2, *byte_mux;
>         int ret;
>
>         DBG("%d", pll_28nm->phy->id);
> @@ -539,32 +539,30 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
>         else
>                 vco_init.ops = &clk_ops_dsi_pll_28nm_vco_hpm;
>
> -       snprintf(vco_name, sizeof(vco_name), "dsi%dvco_clk", pll_28nm->phy->id);
> +       snprintf(clk_name, sizeof(clk_name), "dsi%dvco_clk", pll_28nm->phy->id);
>         pll_28nm->clk_hw.init = &vco_init;
>         ret = devm_clk_hw_register(dev, &pll_28nm->clk_hw);
>         if (ret)
>                 return ret;
>
>         snprintf(clk_name, sizeof(clk_name), "dsi%danalog_postdiv_clk", pll_28nm->phy->id);
> -       snprintf(parent1, sizeof(parent1), "dsi%dvco_clk", pll_28nm->phy->id);
> -       hw = devm_clk_hw_register_divider(dev, clk_name, parent1,
> -                       CLK_SET_RATE_PARENT, pll_28nm->phy->pll_base +
> +       analog_postdiv = devm_clk_hw_register_divider_parent_hw(dev, clk_name,
> +                       &pll_28nm->clk_hw, CLK_SET_RATE_PARENT,
> +                       pll_28nm->phy->pll_base +
>                                 REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG,
>                         0, 4, 0, NULL);
> -       if (IS_ERR(hw))
> -               return PTR_ERR(hw);
> +       if (IS_ERR(analog_postdiv))
> +               return PTR_ERR(analog_postdiv);
>
>         snprintf(clk_name, sizeof(clk_name), "dsi%dindirect_path_div2_clk", pll_28nm->phy->id);
> -       snprintf(parent1, sizeof(parent1), "dsi%danalog_postdiv_clk", pll_28nm->phy->id);
> -       hw = devm_clk_hw_register_fixed_factor(dev, clk_name, parent1,
> -                       CLK_SET_RATE_PARENT, 1, 2);
> -       if (IS_ERR(hw))
> -               return PTR_ERR(hw);
> +       indirect_path_div2 = devm_clk_hw_register_fixed_factor_parent_hw(dev,
> +                       clk_name, analog_postdiv, CLK_SET_RATE_PARENT, 1, 2);
> +       if (IS_ERR(indirect_path_div2))
> +               return PTR_ERR(indirect_path_div2);
>
>         snprintf(clk_name, sizeof(clk_name), "dsi%dpll", pll_28nm->phy->id);
> -       snprintf(parent1, sizeof(parent1), "dsi%dvco_clk", pll_28nm->phy->id);
> -       hw = devm_clk_hw_register_divider(dev, clk_name, parent1, 0,
> -                       pll_28nm->phy->pll_base +
> +       hw = devm_clk_hw_register_divider_parent_hw(dev, clk_name,
> +                       &pll_28nm->clk_hw, 0, pll_28nm->phy->pll_base +
>                                 REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG,
>                         0, 8, 0, NULL);
>         if (IS_ERR(hw))
> @@ -572,20 +570,18 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
>         provided_clocks[DSI_PIXEL_PLL_CLK] = hw;
>
>         snprintf(clk_name, sizeof(clk_name), "dsi%dbyte_mux", pll_28nm->phy->id);
> -       snprintf(parent1, sizeof(parent1), "dsi%dvco_clk", pll_28nm->phy->id);
> -       snprintf(parent2, sizeof(parent2), "dsi%dindirect_path_div2_clk", pll_28nm->phy->id);
> -       hw = devm_clk_hw_register_mux(dev, clk_name,
> -                       ((const char *[]){
> -                               parent1, parent2,
> +       byte_mux = devm_clk_hw_register_mux_parent_hws(dev, clk_name,
> +                       ((const struct clk_hw *[]){
> +                               &pll_28nm->clk_hw,
> +                               indirect_path_div2,
>                         }), 2, CLK_SET_RATE_PARENT, pll_28nm->phy->pll_base +
>                                 REG_DSI_28nm_PHY_PLL_VREG_CFG, 1, 1, 0, NULL);
> -       if (IS_ERR(hw))
> -               return PTR_ERR(hw);
> +       if (IS_ERR(byte_mux))
> +               return PTR_ERR(byte_mux);
>
>         snprintf(clk_name, sizeof(clk_name), "dsi%dpllbyte", pll_28nm->phy->id);
> -       snprintf(parent1, sizeof(parent1), "dsi%dbyte_mux", pll_28nm->phy->id);
> -       hw = devm_clk_hw_register_fixed_factor(dev, clk_name, parent1,
> -                       CLK_SET_RATE_PARENT, 1, 4);
> +       hw = devm_clk_hw_register_fixed_factor_parent_hw(dev, clk_name,
> +                       byte_mux, CLK_SET_RATE_PARENT, 1, 4);
>         if (IS_ERR(hw))
>                 return PTR_ERR(hw);
>         provided_clocks[DSI_BYTE_PLL_CLK] = hw;
> --
> 2.36.1
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux