On 10/05/2022 22:29, Douglas Anderson wrote:
While it works, for the most part, to assume that the panel has
finished probing when devm_of_dp_aux_populate_ep_devices() returns,
it's a bit fragile. This is talked about at length in commit
a1e3667a9835 ("drm/bridge: ti-sn65dsi86: Promote the AUX channel to
its own sub-dev").
When reviewing the ps8640 code, I managed to convince myself that it
was OK not to worry about it there and that maybe it wasn't really
_that_ fragile. However, it turns out that it really is. Simply
hardcoding panel_edp_probe() to return -EPROBE_DEFER was enough to put
the boot process into an infinite loop. I believe this manages to trip
the same issues that we used to trip with the main MSM code where
something about our actions trigger Linux to re-probe previously
deferred devices right away and each time we try again we re-trigger
Linux to re-probe.
Let's fix this using the callback introduced in the patch ("drm/dp:
Callbacks to make it easier for drivers to use DP AUX bus properly").
When using the new callback, we have to be a little careful. The
probe_done() callback is no longer always called in the context of
our probe routine. That means we can't rely on being able to return
-EPROBE_DEFER from it. We re-jigger the order of things a bit to
account for that.
With this change, the device still boots (though obviously the panel
doesn't come up) if I force panel-edp to always return
-EPROBE_DEFER. If I fake it and make the panel probe exactly once it
also works.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
Changes in v3:
- Adapt to v3 changes in aux bus.
- Use devm_drm_bridge_add() to simplify.
Changes in v2:
- Rewrote atop new method introduced by patch #1.
drivers/gpu/drm/bridge/parade-ps8640.c | 74 ++++++++++++++++----------
1 file changed, 46 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
index e2467e58b5b7..ff4227f6d800 100644
--- a/drivers/gpu/drm/bridge/parade-ps8640.c
+++ b/drivers/gpu/drm/bridge/parade-ps8640.c
@@ -537,7 +537,7 @@ static const struct drm_bridge_funcs ps8640_bridge_funcs = {
.pre_enable = ps8640_pre_enable,
};
-static int ps8640_bridge_host_attach(struct device *dev, struct ps8640 *ps_bridge)
+static int ps8640_bridge_get_dsi_resources(struct device *dev, struct ps8640 *ps_bridge)
{
struct device_node *in_ep, *dsi_node;
struct mipi_dsi_device *dsi;
@@ -576,13 +576,40 @@ static int ps8640_bridge_host_attach(struct device *dev, struct ps8640 *ps_bridg
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->lanes = NUM_MIPI_LANES;
- return devm_mipi_dsi_attach(dev, dsi);
+ return 0;
+}
+
+static int ps8640_bridge_link_panel(struct drm_dp_aux *aux)
+{
+ struct ps8640 *ps_bridge = aux_to_ps8640(aux);
+ struct device *dev = aux->dev;
+ struct device_node *np = dev->of_node;
+ int ret;
+
+ /*
+ * NOTE about returning -EPROBE_DEFER from this function: if we
+ * return an error (most relevant to -EPROBE_DEFER) it will only
+ * be passed out to ps8640_probe() if it called this directly (AKA the
+ * panel isn't under the "aux-bus" node). That should be fine because
+ * if the panel is under "aux-bus" it's guaranteed to have probed by
+ * the time this function has been called.
+ */
+
+ /* port@1 is ps8640 output port */
+ ps_bridge->panel_bridge = devm_drm_of_get_bridge(dev, np, 1, 0);
+ if (IS_ERR(ps_bridge->panel_bridge))
+ return PTR_ERR(ps_bridge->panel_bridge);
+
+ ret = devm_drm_bridge_add(dev, &ps_bridge->bridge);
+ if (ret)
+ return ret;
+
+ return devm_mipi_dsi_attach(dev, ps_bridge->dsi);
}
static int ps8640_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
- struct device_node *np = dev->of_node;
struct ps8640 *ps_bridge;
int ret;
u32 i;
@@ -623,6 +650,14 @@ static int ps8640_probe(struct i2c_client *client)
if (!ps8640_of_panel_on_aux_bus(&client->dev))
ps_bridge->bridge.ops = DRM_BRIDGE_OP_EDID;
+ /*
+ * Get MIPI DSI resources early. These can return -EPROBE_DEFER so
+ * we want to get them out of the way sooner.
+ */
+ ret = ps8640_bridge_get_dsi_resources(&client->dev, ps_bridge);
+ if (ret)
+ return ret;
+
ps_bridge->page[PAGE0_DP_CNTL] = client;
ps_bridge->regmap[PAGE0_DP_CNTL] = devm_regmap_init_i2c(client, ps8640_regmap_config);
@@ -665,35 +700,19 @@ static int ps8640_probe(struct i2c_client *client)
if (ret)
return ret;
- devm_of_dp_aux_populate_ep_devices(&ps_bridge->aux);
+ ret = devm_of_dp_aux_populate_bus(&ps_bridge->aux, ps8640_bridge_link_panel);
- /* port@1 is ps8640 output port */
- ps_bridge->panel_bridge = devm_drm_of_get_bridge(dev, np, 1, 0);
- if (IS_ERR(ps_bridge->panel_bridge))
- return PTR_ERR(ps_bridge->panel_bridge);
-
- drm_bridge_add(&ps_bridge->bridge);
-
- ret = ps8640_bridge_host_attach(dev, ps_bridge);
- if (ret)
- goto err_bridge_remove;
-
- return 0;
+ /*
+ * If devm_of_dp_aux_populate_bus() returns -ENODEV then it's up to
+ * usa to call ps8640_bridge_link_panel() directly. NOTE: in this case
+ * the function is allowed to -EPROBE_DEFER.
+ */
+ if (ret == -ENODEV)
+ return ps8640_bridge_link_panel(&ps_bridge->aux);
-err_bridge_remove:
- drm_bridge_remove(&ps_bridge->bridge);
return ret;
}
-static int ps8640_remove(struct i2c_client *client)
-{
- struct ps8640 *ps_bridge = i2c_get_clientdata(client);
-
- drm_bridge_remove(&ps_bridge->bridge);
-
- return 0;
-}
-
static const struct of_device_id ps8640_match[] = {
{ .compatible = "parade,ps8640" },
{ }
@@ -702,7 +721,6 @@ MODULE_DEVICE_TABLE(of, ps8640_match);
static struct i2c_driver ps8640_driver = {
.probe_new = ps8640_probe,
- .remove = ps8640_remove,
.driver = {
.name = "ps8640",
.of_match_table = ps8640_match,
--
With best wishes
Dmitry
