This is a follow up from my v4 patchset. The power management pieces have been split out to a separate independent set of patches by Stefan [1]. This version 5 of the DRM patches are independent and given the V3D driver has been upstream for some time the two patches to enable it in defconfigs can be taken at anytime independent of the enablement for the Raspberry Pi 4. I've tested this using mesa 22.0.x and Wayland/Gnome on Fedora 36, it's more or less stable with basic testing. Changes since v4: - Fixes for device tree and bindings - Split out the power management changes into an independent set - Rebase to 5.18 - Individual changes in patches [1] https://www.spinics.net/lists/arm-kernel/msg980342.html Nicolas Saenz Julienne (1): arm64: config: Enable DRM_V3D Peter Robinson (5): dt-bindings: gpu: v3d: Add BCM2711's compatible drm/v3d: Get rid of pm code drm/v3d: Add support for bcm2711 ARM: dts: bcm2711: Enable V3D ARM: configs: Enable DRM_V3D .../devicetree/bindings/gpu/brcm,bcm-v3d.yaml | 1 + arch/arm/boot/dts/bcm2711-rpi.dtsi | 4 ++++ arch/arm/boot/dts/bcm2711.dtsi | 11 +++++++++++ arch/arm/configs/bcm2835_defconfig | 1 + arch/arm/configs/multi_v7_defconfig | 1 + arch/arm64/configs/defconfig | 1 + drivers/gpu/drm/v3d/Kconfig | 2 +- drivers/gpu/drm/v3d/v3d_debugfs.c | 18 +----------------- drivers/gpu/drm/v3d/v3d_drv.c | 12 +----------- drivers/gpu/drm/v3d/v3d_gem.c | 12 +----------- 10 files changed, 23 insertions(+), 40 deletions(-) -- 2.36.1
