Hi,
On Tue, May 31, 2022 at 2:29 PM Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
>
> > @@ -136,6 +178,13 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
> > {
> > int ret;
> >
> > + /*
> > + * Several components have AXI clocks that can only be turned on if
> > + * the interconnect is enabled (non-zero bandwidth). Let's make sure
> > + * that the interconnects are at least at a minimum amount.
> > + */
> > + msm_mdss_icc_request_bw(msm_mdss, MIN_IB_BW);
> > +
>
> This patch does two things :
>
> 1) Move the min icc vote from the dpu_runtime_resume() path to the
> msm_mdss_enable() so that while resuming, we add the min vote to the
> parent device. We do need a min vote before turning on the AXI clk as
> per this comment mentioned in c33b7c0389e1 (drm/msm/dpu: add support for
> clk and bw scaling for display)
>
>
> @@ -1101,8 +1129,15 @@ static int __maybe_unused
> dpu_runtime_resume(struct device *dev)
> struct drm_encoder *encoder;
> struct drm_device *ddev;
> struct dss_module_power *mp = &dpu_kms->mp;
> + int i;
>
> ddev = dpu_kms->dev;
> +
> + /* Min vote of BW is required before turning on AXI clk */
> + for (i = 0; i < dpu_kms->num_paths; i++)
> + icc_set_bw(dpu_kms->path[i], 0,
> + dpu_kms->catalog->perf.min_dram_ib);
>
> So I understand and I am fine with this part.
>
> 2) Add a min vote in msm_mdss_init().
>
> This is the part I am not able to fully follow.
>
> If we only need to add the min vote before voting for the clocks, adding
> it in mdss_mdss_enable() should be enough.
>
> Do we need this part of adding the min vote to the msm_mdss_init()?
>
> If so, why?
Ah, good question. Mostly I was matching how things were done before
commit a670ff578f1f ("drm/msm/dpu: always use mdp device to scale
bandwidth"). Before that commit we used to put the min vote in the
init path.
...but you're right, I don't see any good reason for it. I'll send a
v2 removing that line from msm_mdss_init().
-Doug
