Gentle ping on this path, thanks. > -----Original Message----- > From: Neal Liu <neal_liu@xxxxxxxxxxxxxx> > Sent: Monday, May 23, 2022 11:02 AM > To: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; Rob Herring > <robh+dt@xxxxxxxxxx>; Krzysztof Kozlowski > <krzysztof.kozlowski+dt@xxxxxxxxxx>; Joel Stanley <joel@xxxxxxxxx>; Andrew > Jeffery <andrew@xxxxxxxx>; Felipe Balbi <balbi@xxxxxxxxxx>; Sumit Semwal > <sumit.semwal@xxxxxxxxxx>; Christian König <christian.koenig@xxxxxxx>; > Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>; Li Yang <leoyang.li@xxxxxxx> > Cc: Neal Liu <neal_liu@xxxxxxxxxxxxxx>; linux-aspeed@xxxxxxxxxxxxxxxx; > linux-usb@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > linux-media@xxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx; > linaro-mm-sig@xxxxxxxxxxxxxxxx > Subject: [PATCH v5 2/3] ARM: dts: aspeed: Add USB2.0 device controller node > > Add USB2.0 device controller(udc) node to device tree for AST2600. > > Signed-off-by: Neal Liu <neal_liu@xxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/aspeed-g6.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi > b/arch/arm/boot/dts/aspeed-g6.dtsi > index 3d5ce9da42c3..822f4fd854f5 100644 > --- a/arch/arm/boot/dts/aspeed-g6.dtsi > +++ b/arch/arm/boot/dts/aspeed-g6.dtsi > @@ -298,6 +298,16 @@ vhub: usb-vhub@1e6a0000 { > status = "disabled"; > }; > > + udc: usb@1e6a2000 { > + compatible = "aspeed,ast2600-udc"; > + reg = <0x1e6a2000 0x300>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb2bd_default>; > + status = "disabled"; > + }; > + > apb { > compatible = "simple-bus"; > #address-cells = <1>; > -- > 2.25.1