Re: [PATCH v10 18/21] drm/mediatek: Add mt8195 Embedded DisplayPort driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Guillaume:

On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote:
> From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> 
> This patch adds a DisplayPort driver for the Mediatek mt8195 SoC.
> 
> It supports the mt8195, the embedded DisplayPort units. It offers
> DisplayPort 1.4 with up to 4 lanes.
> 
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so
> that
> both can work with the same register range. The phy driver sets
> device
> data that is read by the parent to get the phy device that can be
> used
> to control the phy properties.
> 
> This driver is based on an initial version by
> Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>.
> 
> Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
> ---
>  

[snip]

> +
> +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev)

I don't have a DP spec. I find one in [1] but I'm not sure it's real
spec or not. If it's real, in section 3.1.3.2, it describe:

3.1.3.2 Hot Plug/Unplug Detection
One signal (HPD) is used by a device (an Upstream device) to detect
that a Downstream port on the device has been connected to another
device (the Downstream device). Implementation of HPD is optional for
an embedded link configuration. At least a “trickle power” must be
present both in the Upstream and Downstream devices for a Hot Plug
event to be detected. 

I focus on the statement "Implementation of HPD is optional for an
embedded link configuration". I'm not sure what does 'optional' mean.
Does it mean eDP panel without HPD signal is possible? If so, I think
driver should support eDP panel without HPD signal. Maybe I
misunderstanding this spec. Please explain for me.

Regards,
CK


[1] https://glenwing.github.io/docs/DP-1.2.pdf

> +{
> +	struct mtk_dp *mtk_dp = dev;
> +	int event;
> +	u8 buf[DP_RECEIVER_CAP_SIZE] = {};
> +
> +	event = mtk_dp_plug_state(mtk_dp) ? connector_status_connected
> :
> +						  connector_status_disc
> onnected;
> +
> +	if (event < 0)
> +		return IRQ_HANDLED;
> +
> +	if (mtk_dp->drm_dev) {
> +		dev_info(mtk_dp->dev, "drm_helper_hpd_irq_event\n");
> +		drm_helper_hpd_irq_event(mtk_dp->bridge.dev);
> +	}
> +
> +	if (mtk_dp->train_info.cable_state_change) {
> +		mtk_dp->train_info.cable_state_change = false;
> +
> +		mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP;
> +
> +		if (!mtk_dp->train_info.cable_plugged_in ||
> +		    !mtk_dp_plug_state(mtk_dp)) {
> +			mtk_dp_video_mute(mtk_dp, true);
> +
> +			mtk_dp_initialize_priv_data(mtk_dp);
> +			mtk_dp_set_idle_pattern(mtk_dp, true);
> +			if (mtk_dp->has_fec)
> +				mtk_dp_fec_enable(mtk_dp, false);
> +
> +			mtk_dp_update_bits(mtk_dp,
> MTK_DP_TOP_PWR_STATE,
> +					   DP_PWR_STATE_BANDGAP_TPLL,
> +					   DP_PWR_STATE_MASK);
> +		} else {
> +			mtk_dp_update_bits(mtk_dp,
> MTK_DP_TOP_PWR_STATE,
> +					   DP_PWR_STATE_BANDGAP_TPLL_LA
> NE,
> +					   DP_PWR_STATE_MASK);
> +			drm_dp_read_dpcd_caps(&mtk_dp->aux, buf);
> +			mtk_dp->train_info.link_rate =
> +				min_t(int, mtk_dp->max_linkrate,
> +				      buf[mtk_dp->max_linkrate]);
> +			mtk_dp->train_info.lane_count =
> +				min_t(int, mtk_dp->max_lanes,
> +				      drm_dp_max_lane_count(buf));
> +		}
> +	}
> +
> +	if (mtk_dp->train_info.irq_status & MTK_DP_HPD_INTERRUPT) {
> +		dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n");
> +		mtk_dp->train_info.irq_status &= ~MTK_DP_HPD_INTERRUPT;
> +		mtk_dp_hpd_sink_event(mtk_dp);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux