Re: [PATCH 4/9] drm/msm/dsi_phy_28nm: Replace parent names with clk_hw pointers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 24 May 2022 at 00:38, Marijn Suijten
<marijn.suijten@xxxxxxxxxxxxxx> wrote:
>
> parent_hw pointers are easier to manage and cheaper to use than
> repeatedly formatting the parent name and subsequently leaving the clk
> framework to perform lookups based on that name.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>



> ---
>  drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 52 +++++++++-------------
>  1 file changed, 22 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> index 48eab80b548e..6926c8ff6255 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> @@ -519,7 +519,7 @@ static int dsi_28nm_pll_restore_state(struct msm_dsi_phy *phy)
>
>  static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **provided_clocks)
>  {
> -       char clk_name[32], parent1[32], parent2[32], vco_name[32];
> +       char clk_name[32], vco_name[32];

While we are at it, we might also get rid of vco_name and use clk_name
everywhere.

>         struct clk_init_data vco_init = {
>                 .parent_data = &(const struct clk_parent_data) {
>                         .fw_name = "ref", .name = "xo",
> @@ -529,7 +529,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
>                 .flags = CLK_IGNORE_UNUSED,
>         };
>         struct device *dev = &pll_28nm->phy->pdev->dev;
> -       struct clk_hw *hw;
> +       struct clk_hw *hw, *analog_postdiv, *indirect_path_div2, *byte_mux;
>         int ret;
>
>         DBG("%d", pll_28nm->phy->id);
> @@ -546,48 +546,40 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
>                 return ret;
>
>         snprintf(clk_name, 32, "dsi%danalog_postdiv_clk", pll_28nm->phy->id);
> -       snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->phy->id);
> -       hw = devm_clk_hw_register_divider(dev, clk_name,
> -                       parent1, CLK_SET_RATE_PARENT,
> +       analog_postdiv = devm_clk_hw_register_divider_parent_hw(dev, clk_name,
> +                       &pll_28nm->clk_hw, CLK_SET_RATE_PARENT,
>                         pll_28nm->phy->pll_base +
> -                       REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG,
> -                       0, 4, 0, NULL);
> -       if (IS_ERR(hw))
> -               return PTR_ERR(hw);
> +                       REG_DSI_28nm_PHY_PLL_POSTDIV1_CFG, 0, 4, 0, NULL);

The diff is already hard enough to read. Could you please drop
syntax/whitespace/newline changes?

> +       if (IS_ERR(analog_postdiv))
> +               return PTR_ERR(analog_postdiv);
>
>         snprintf(clk_name, 32, "dsi%dindirect_path_div2_clk", pll_28nm->phy->id);
> -       snprintf(parent1, 32, "dsi%danalog_postdiv_clk", pll_28nm->phy->id);
> -       hw = devm_clk_hw_register_fixed_factor(dev, clk_name,
> -                       parent1, CLK_SET_RATE_PARENT,
> -                       1, 2);
> -       if (IS_ERR(hw))
> -               return PTR_ERR(hw);
> +       indirect_path_div2 = devm_clk_hw_register_fixed_factor_parent_hw(dev,
> +                       clk_name, analog_postdiv, CLK_SET_RATE_PARENT, 1, 2);
> +       if (IS_ERR(indirect_path_div2))
> +               return PTR_ERR(indirect_path_div2);
>
>         snprintf(clk_name, 32, "dsi%dpll", pll_28nm->phy->id);
> -       snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->phy->id);
> -       hw = devm_clk_hw_register_divider(dev, clk_name,
> -                               parent1, 0, pll_28nm->phy->pll_base +
> -                               REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG,
> -                               0, 8, 0, NULL);
> +       hw = devm_clk_hw_register_divider_parent_hw(dev, clk_name,
> +                       &pll_28nm->clk_hw, 0, pll_28nm->phy->pll_base +
> +                       REG_DSI_28nm_PHY_PLL_POSTDIV3_CFG, 0, 8, 0, NULL);
>         if (IS_ERR(hw))
>                 return PTR_ERR(hw);
>         provided_clocks[DSI_PIXEL_PLL_CLK] = hw;
>
>         snprintf(clk_name, 32, "dsi%dbyte_mux", pll_28nm->phy->id);
> -       snprintf(parent1, 32, "dsi%dvco_clk", pll_28nm->phy->id);
> -       snprintf(parent2, 32, "dsi%dindirect_path_div2_clk", pll_28nm->phy->id);
> -       hw = devm_clk_hw_register_mux(dev, clk_name,
> -                       ((const char *[]){
> -                               parent1, parent2
> +       byte_mux = devm_clk_hw_register_mux_parent_hws(dev, clk_name,
> +                       ((const struct clk_hw *[]){
> +                               &pll_28nm->clk_hw,
> +                               indirect_path_div2,
>                         }), 2, CLK_SET_RATE_PARENT, pll_28nm->phy->pll_base +
>                         REG_DSI_28nm_PHY_PLL_VREG_CFG, 1, 1, 0, NULL);
> -       if (IS_ERR(hw))
> -               return PTR_ERR(hw);
> +       if (IS_ERR(byte_mux))
> +               return PTR_ERR(byte_mux);
>
>         snprintf(clk_name, 32, "dsi%dpllbyte", pll_28nm->phy->id);
> -       snprintf(parent1, 32, "dsi%dbyte_mux", pll_28nm->phy->id);
> -       hw = devm_clk_hw_register_fixed_factor(dev, clk_name,
> -                               parent1, CLK_SET_RATE_PARENT, 1, 4);
> +       hw = devm_clk_hw_register_fixed_factor_parent_hw(dev, clk_name,
> +                       byte_mux, CLK_SET_RATE_PARENT, 1, 4);
>         if (IS_ERR(hw))
>                 return PTR_ERR(hw);
>         provided_clocks[DSI_BYTE_PLL_CLK] = hw;
> --
> 2.36.1
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux