[PATCH v2 1/2] phy/qcom: add regulator_set_load to edp/dp phy

[Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>]

This patch add regulator_set_load() to both eDP and DP phy driver
to have totally control regulators.

Changes in v2:
-- no regulator_set_laod() before disable regulator

Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 25 +++++++++++++++++++++----
 drivers/phy/qualcomm/phy-qcom-qmp.c | 13 +++++++++++++
 2 files changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index cacd32f..9b55095 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -87,17 +87,24 @@ struct qcom_edp {
 
 	struct clk_bulk_data clks[2];
 	struct regulator_bulk_data supplies[2];
+	int enable_load[2];
+	int disable_load[2];
 };
 
 static int qcom_edp_phy_init(struct phy *phy)
 {
 	struct qcom_edp *edp = phy_get_drvdata(phy);
 	int ret;
+	int num_consumers = ARRAY_SIZE(edp->supplies);
+	int i;
 
-	ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
+	ret = regulator_bulk_enable(num_consumers, edp->supplies);
 	if (ret)
 		return ret;
 
+	for (i = num_consumers - 1; i >= 0; --i)
+		regulator_set_load(edp->supplies[i].consumer, edp->enable_load[i]);
+
 	ret = clk_bulk_prepare_enable(ARRAY_SIZE(edp->clks), edp->clks);
 	if (ret)
 		goto out_disable_supplies;
@@ -425,9 +432,15 @@ static int qcom_edp_phy_power_off(struct phy *phy)
 static int qcom_edp_phy_exit(struct phy *phy)
 {
 	struct qcom_edp *edp = phy_get_drvdata(phy);
+	int num_consumers = ARRAY_SIZE(edp->supplies);
+	int i;
 
 	clk_bulk_disable_unprepare(ARRAY_SIZE(edp->clks), edp->clks);
-	regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies);
+
+	for (i = num_consumers - 1; i >= 0; --i)
+		regulator_set_load(edp->supplies[i].consumer, edp->disable_load[i]);
+
+	regulator_bulk_disable(num_consumers, edp->supplies);
 
 	return 0;
 }
@@ -633,8 +646,12 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	edp->supplies[0].supply = "vdda-phy";
-	edp->supplies[1].supply = "vdda-pll";
+	edp->supplies[0].supply = "vdda-1p2";
+	edp->supplies[1].supply = "vdda-0p9";
+	edp->enable_load[0] = 21800;	/* 1.2 V */
+	edp->enable_load[1] = 36000;	/* 1.2 V */
+	edp->disable_load[0] = 4;	/* 0.9 V */
+	edp->disable_load[1] = 4;	/* 10.9V */
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
 	if (ret)
 		return ret;
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index b144ae1..0a4c8a8 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3130,6 +3130,7 @@ struct qmp_phy_cfg {
 	int num_resets;
 	/* regulators to be requested */
 	const char * const *vreg_list;
+	const unsigned int *vreg_enable_load;
 	int num_vregs;
 
 	/* array of registers with different offsets */
@@ -3346,6 +3347,10 @@ static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
 };
 
+static const unsigned int qmp_phy_vreg_enable_load[] = {
+	21800, 36000
+};
+
 static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 	.type			= PHY_TYPE_USB3,
 	.nlanes			= 1,
@@ -4072,6 +4077,7 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
+	.vreg_enable_load	= qmp_phy_vreg_enable_load,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v4_usb3phy_regs_layout,
 
@@ -4139,6 +4145,7 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
+	.vreg_enable_load	= qmp_phy_vreg_enable_load,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v4_usb3phy_regs_layout,
 
@@ -5008,6 +5015,11 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
 		return 0;
 	}
 
+	if (cfg->vreg_enable_load) {
+		for (i = cfg->num_vregs - 1; i >= 0; --i)
+			regulator_set_load(qmp->vregs[i].consumer, cfg->vreg_enable_load[i]);
+	}
+
 	/* turn on regulator supplies */
 	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
 	if (ret) {
@@ -5116,6 +5128,7 @@ static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
 
 	clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
 
+	/* no minimum load set required before disable regulator */
 	regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
 
 	mutex_unlock(&qmp->phy_mutex);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project