On 17-05-22, 10:25, Kuogee Hsieh wrote:
pls use the correct subsystem tag, "phy: xxx" in this case
> This patch add regulator_set_load() to both eDP and DP phy driver
> to have totally control regulators.
Can you explain what is meant by "totally control regulators"
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> ---
> drivers/phy/qualcomm/phy-qcom-edp.c | 25 +++++++++++++++++++++----
> drivers/phy/qualcomm/phy-qcom-qmp.c | 24 ++++++++++++++++++++++++
> 2 files changed, 45 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index cacd32f..9b55095 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -87,17 +87,24 @@ struct qcom_edp {
>
> struct clk_bulk_data clks[2];
> struct regulator_bulk_data supplies[2];
> + int enable_load[2];
> + int disable_load[2];
> };
>
> static int qcom_edp_phy_init(struct phy *phy)
> {
> struct qcom_edp *edp = phy_get_drvdata(phy);
> int ret;
> + int num_consumers = ARRAY_SIZE(edp->supplies);
> + int i;
>
> - ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
> + ret = regulator_bulk_enable(num_consumers, edp->supplies);
> if (ret)
> return ret;
>
> + for (i = num_consumers - 1; i >= 0; --i)
> + regulator_set_load(edp->supplies[i].consumer, edp->enable_load[i]);
> +
> ret = clk_bulk_prepare_enable(ARRAY_SIZE(edp->clks), edp->clks);
> if (ret)
> goto out_disable_supplies;
> @@ -425,9 +432,15 @@ static int qcom_edp_phy_power_off(struct phy *phy)
> static int qcom_edp_phy_exit(struct phy *phy)
> {
> struct qcom_edp *edp = phy_get_drvdata(phy);
> + int num_consumers = ARRAY_SIZE(edp->supplies);
> + int i;
>
> clk_bulk_disable_unprepare(ARRAY_SIZE(edp->clks), edp->clks);
> - regulator_bulk_disable(ARRAY_SIZE(edp->supplies), edp->supplies);
> +
> + for (i = num_consumers - 1; i >= 0; --i)
> + regulator_set_load(edp->supplies[i].consumer, edp->disable_load[i]);
> +
> + regulator_bulk_disable(num_consumers, edp->supplies);
>
> return 0;
> }
> @@ -633,8 +646,12 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> - edp->supplies[0].supply = "vdda-phy";
> - edp->supplies[1].supply = "vdda-pll";
> + edp->supplies[0].supply = "vdda-1p2";
> + edp->supplies[1].supply = "vdda-0p9";
These are documented in bindings, so cannot be removed, Reminder binding
is an ABI
You have not documented the new names either...
> + edp->enable_load[0] = 21800; /* 1.2 V */
> + edp->enable_load[1] = 36000; /* 1.2 V */
> + edp->disable_load[0] = 4; /* 0.9 V */
> + edp->disable_load[1] = 4; /* 10.9V */
is that correct, 10.9V?
> ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
> if (ret)
> return ret;
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index b144ae1..c589231 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
This is a different driver, so should be a different patch!
> @@ -3130,6 +3130,8 @@ struct qmp_phy_cfg {
> int num_resets;
> /* regulators to be requested */
> const char * const *vreg_list;
> + const unsigned int *vreg_enable_load;
> + const unsigned int *vreg_disable_load;
> int num_vregs;
>
> /* array of registers with different offsets */
> @@ -3346,6 +3348,14 @@ static const char * const qmp_phy_vreg_l[] = {
> "vdda-phy", "vdda-pll",
> };
>
> +static const unsigned int qmp_phy_vreg_enable_load[] = {
> + 21800, 36000
> +};
> +
> +static const unsigned int qmp_phy_vreg_disable_load[] = {
> + 4, 32
> +};
> +
> static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
> .type = PHY_TYPE_USB3,
> .nlanes = 1,
> @@ -4072,6 +4082,8 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
> .reset_list = msm8996_usb3phy_reset_l,
> .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> .vreg_list = qmp_phy_vreg_l,
> + .vreg_enable_load = qmp_phy_vreg_enable_load,
> + .vreg_disable_load = qmp_phy_vreg_disable_load,
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = qmp_v4_usb3phy_regs_layout,
>
> @@ -4139,6 +4151,8 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
> .reset_list = msm8996_usb3phy_reset_l,
> .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
> .vreg_list = qmp_phy_vreg_l,
> + .vreg_enable_load = qmp_phy_vreg_enable_load,
> + .vreg_disable_load = qmp_phy_vreg_disable_load,
> .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> .regs = qmp_v4_usb3phy_regs_layout,
>
> @@ -5015,6 +5029,11 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
> goto err_reg_enable;
> }
>
> + if (cfg->vreg_enable_load) {
> + for (i = cfg->num_vregs - 1; i >= 0; --i)
> + regulator_set_load(qmp->vregs[i].consumer, cfg->vreg_enable_load[i]);
> + }
> +
> for (i = 0; i < cfg->num_resets; i++) {
> ret = reset_control_assert(qmp->resets[i]);
> if (ret) {
> @@ -5116,6 +5135,11 @@ static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy)
>
> clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
>
> + if (cfg->vreg_disable_load[i]) {
> + for (i = cfg->num_vregs - 1; i >= 0; --i)
> + regulator_set_load(qmp->vregs[i].consumer, cfg->vreg_disable_load[i]);
> + }
> +
> regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
>
> mutex_unlock(&qmp->phy_mutex);
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
--
~Vinod
