Re: [PATCH v4] drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/05/2022 00:40, Kuogee Hsieh wrote:
dp_catalog_ctrl_reset() will software reset DP controller. But it will
not reset programmable registers to default value. DP driver still have
to clear mask bits to interrupt status registers to disable interrupts
after software reset of controller. This patch removes the enable flag
condition checking to always clear mask bits of interrupt status
registers to disable interrupts if enable flag is false.

This patch also will fix the potential problem happen at system suspend where
dp_ctrl_reset_irq_ctrl() was called to try to disable HPD related irqs but
the irq is still unmasked unexpectedly

Why is it unmasked? Especially unexpectedly.

and can come in while system are
suspending. This leads to bus hangs if the irq is handled after we power down
the DP hardware because we run the irq handler and access a device register
assuming that no irq could ever come in if we powered down the device. We
don't know when the irq will be handled though, so it's possible the irq is
pending from before we disable the irq in the hardware.

Please split into two patches.


Changes in v2:
-- add more details commit text

Changes in v3:
-- add synchrons_irq()
-- add atomic_t suspended

Changes in v4:
-- correct Fixes's commit ID

Fixes: 989ebe7bc446 ("drm/msm/dp: do not initialize phy until plugin interrupt received")
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
  drivers/gpu/drm/msm/dp/dp_ctrl.c    |  9 +++++++--
  drivers/gpu/drm/msm/dp/dp_display.c | 18 ++++++++++++++++++
  2 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index af7a80c..f3e333e 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1389,8 +1389,13 @@ void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable)
dp_catalog_ctrl_reset(ctrl->catalog); - if (enable)
-		dp_catalog_ctrl_enable_irq(ctrl->catalog, enable);
+	/*
+	 * all dp controller programmable registers will not
+	 * be reset to default value after DP_SW_RESET
+	 * therefore interrupt mask bits have to be updated
+	 * to enable/disable interrupts
+	 */
+	dp_catalog_ctrl_enable_irq(ctrl->catalog, enable);
  }
void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index c388323..c34dbfc 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -98,6 +98,8 @@ struct dp_display_private {
  	struct dp_ctrl    *ctrl;
  	struct dp_debug   *debug;
+ atomic_t suspended;

Usage of atomic_t signifies that something is wrong here. Bool should be enough here.

+
  	struct dp_usbpd_cb usbpd_cb;
  	struct dp_display_mode dp_mode;
  	struct msm_dp dp_display;
@@ -187,6 +189,11 @@ static int dp_add_event(struct dp_display_private *dp_priv, u32 event,
  	int pndx;
spin_lock_irqsave(&dp_priv->event_lock, flag);
+	if (atomic_read(&dp_priv->suspended)) {
+		spin_unlock_irqrestore(&dp_priv->event_lock, flag);
+		return -EPERM;

Why EPERM?

+	}
+
  	pndx = dp_priv->event_pndx + 1;
  	pndx %= DP_EVENT_Q_MAX;
  	if (pndx == dp_priv->event_gndx) {
@@ -454,6 +461,13 @@ static void dp_display_host_deinit(struct dp_display_private *dp)
  		dp->dp_display.connector_type, dp->core_initialized,
  		dp->phy_initialized);
+ if (!dp->core_initialized) {

Can this happen?

+		DRM_DEBUG_DP("DP core not initialized\n");
+		return;
+	}
+
+	synchronize_irq(dp->irq);

Why? If you need to run with IRQs disabled, you can use suspend_late/early_resume. But generally it should be enough to check for the !suspended in the IRQ.

+
  	dp_ctrl_reset_irq_ctrl(dp->ctrl, false);
  	dp_aux_deinit(dp->aux);
  	dp_power_deinit(dp->power);
@@ -1362,6 +1376,8 @@ static int dp_pm_resume(struct device *dev)
  		dp->dp_display.connector_type, dp->core_initialized,
  		dp->phy_initialized, dp_display->power_on);
+ atomic_set(&dp->suspended, 0);
+
  	/* start from disconnected state */
  	dp->hpd_state = ST_DISCONNECTED;
@@ -1431,6 +1447,8 @@ static int dp_pm_suspend(struct device *dev)
  		dp->dp_display.connector_type, dp->core_initialized,
  		dp->phy_initialized, dp_display->power_on);
+ atomic_inc(&dp->suspended);
+
  	/* mainlink enabled */
  	if (dp_power_clk_status(dp->power, DP_CTRL_PM))
  		dp_ctrl_off_link_stream(dp->ctrl);


--
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux