Add bindings for the EBBG FT8719 6.18" 2246x1080 DSI video mode panel, which can be found on some Xiaomi Poco F1 phones. The backlight is managed through the QCOM WLED driver. Signed-off-by: Joel Selvaraj <jo@xxxxxxxxxxx> --- .../bindings/display/panel/ebbg,ft8719.yaml | 78 +++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml diff --git a/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml new file mode 100644 index 000000000000..fac6c9692c55 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EBBG FT8719 MIPI-DSI LCD panel + +maintainers: + - Joel Selvaraj <jo@xxxxxxxxxxx> + +description: | + The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution + of 1080x2246. It is a video mode DSI panel. The backlight is managed + through the QCOM WLED driver. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: ebbg,ft8719 + + reg: + description: DSI virtual channel of the peripheral + + reset-gpios: + description: phandle of gpio for reset line + + vddio-supply: + description: phandle of the Power IC supply regulator + + vddpos-supply: + description: phandle of the positive boost supply regulator + + vddneg-supply: + description: phandle of the negative boost supply regulator + + backlight: true + port: true + +required: + - compatible + - reg + - vddio-supply + - vddpos-supply + - vddneg-supply + - reset-gpios + - port + +unevaluatedProperties: false + +examples: + - |+ + #include <dt-bindings/gpio/gpio.h> + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "ebbg,ft8719"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + backlight = <&pmi8998_wled>; + + port { + ebbg_ft8719_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; -- 2.35.1
