Quoting Kuogee Hsieh (2022-04-25 17:16:53)
> At normal operation, transmit phy test pattern has to be terminated before
> DP controller switch to video ready state. However during phy compliance
> testing, transmit phy test pattern should not be terminated until end of
> compliance test which usually indicated by unplugged interrupt.
>
> Only stop sending the train pattern in dp_ctrl_on_stream() if we're not
> doing compliance testing. We also no longer reset 'p_level' and
> 'v_level' within dp_ctrl_on_link() due to both 'p_level' and 'v_level'
> are acquired from link status at previous dpcd read and we like to use
> those level to start link training.
>
> Changes in v2:
> -- add more details commit text
> -- correct Fixes
>
> Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready")
> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> ---
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
One comment.
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index 193cc1a..f99e173 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -1839,6 +1831,13 @@ int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl)
> return 0;
> }
>
> + if (!dp_ctrl_channel_eq_ok(ctrl)) {
> + dp_ctrl_link_retrain(ctrl);
> + }
Drop unnecessary braces.
