Re: [PATCH v17 07/21] soc: mediatek: mmsys: modify reset controller for MT8195 vdosys1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Matthias,

Thanks for the review.

On Fri, 2022-04-22 at 13:37 +0200, Matthias Brugger wrote:
> 
> On 16/04/2022 04:07, Nancy.Lin wrote:
> > MT8195 vdosys1 has more than 32 reset bits and a different reset
> > base
> > than other chips. Modify mmsys for support 64 bit and different
> > reset
> > base.
> > 
> > Signed-off-by: Nancy.Lin <nancy.lin@xxxxxxxxxxxx>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@xxxxxxxxxxxxx>
> > ---
> >   drivers/soc/mediatek/mt8195-mmsys.h |  1 +
> >   drivers/soc/mediatek/mtk-mmsys.c    | 39 ++++++++++++++++++----
> > -------
> >   drivers/soc/mediatek/mtk-mmsys.h    |  1 +
> >   3 files changed, 27 insertions(+), 14 deletions(-)
> > 
> > diff --git a/drivers/soc/mediatek/mt8195-mmsys.h
> > b/drivers/soc/mediatek/mt8195-mmsys.h
> > index 5469073e3073..0a286fa5a824 100644
> > --- a/drivers/soc/mediatek/mt8195-mmsys.h
> > +++ b/drivers/soc/mediatek/mt8195-mmsys.h
> > @@ -139,6 +139,7 @@
> >   #define MT8195_VDO1_MIXER_SOUT_SEL_IN				
> > 0xf68
> >   #define MT8195_MIXER_SOUT_SEL_IN_FROM_DISP_MIXER			
> > 0
> >   
> > +#define MT8195_VDO1_SW0_RST_B		0x1d0
> >   #define MT8195_VDO1_MERGE0_ASYNC_CFG_WD	0xe30
> >   #define MT8195_VDO1_HDRBE_ASYNC_CFG_WD	0xe70
> >   #define MT8195_VDO1_HDR_TOP_CFG		0xd00
> > diff --git a/drivers/soc/mediatek/mtk-mmsys.c
> > b/drivers/soc/mediatek/mtk-mmsys.c
> > index ea04aa2c3840..d7c806f9e494 100644
> > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > @@ -20,6 +20,8 @@
> >   #include "mt8195-mmsys.h"
> >   #include "mt8365-mmsys.h"
> >   
> > +#define MMSYS_SW_RESET_PER_REG 32
> > +
> >   static const struct mtk_mmsys_driver_data
> > mt2701_mmsys_driver_data = {
> >   	.clk_driver = "clk-mt2701-mm",
> >   	.routes = mmsys_default_routing_table,
> > @@ -86,6 +88,7 @@ static const struct mtk_mmsys_driver_data
> > mt8173_mmsys_driver_data = {
> >   	.routes = mmsys_default_routing_table,
> >   	.num_routes = ARRAY_SIZE(mmsys_default_routing_table),
> >   	.sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> > +	.num_resets = 32,
> >   };
> >   
> >   static const struct mtk_mmsys_match_data mt8173_mmsys_match_data
> > = {
> > @@ -100,6 +103,7 @@ static const struct mtk_mmsys_driver_data
> > mt8183_mmsys_driver_data = {
> >   	.routes = mmsys_mt8183_routing_table,
> >   	.num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
> >   	.sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> > +	.num_resets = 32,
> >   };
> >   
> >   static const struct mtk_mmsys_match_data mt8183_mmsys_match_data
> > = {
> > @@ -114,6 +118,7 @@ static const struct mtk_mmsys_driver_data
> > mt8186_mmsys_driver_data = {
> >   	.routes = mmsys_mt8186_routing_table,
> >   	.num_routes = ARRAY_SIZE(mmsys_mt8186_routing_table),
> >   	.sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
> > +	.num_resets = 32,
> >   };
> >   
> >   static const struct mtk_mmsys_match_data mt8186_mmsys_match_data
> > = {
> > @@ -148,6 +153,8 @@ static const struct mtk_mmsys_driver_data
> > mt8195_vdosys1_driver_data = {
> >   	.clk_driver = "clk-mt8195-vdo1",
> >   	.routes = mmsys_mt8195_routing_table,
> >   	.num_routes = ARRAY_SIZE(mmsys_mt8195_routing_table),
> > +	.sw0_rst_offset = MT8195_VDO1_SW0_RST_B,
> > +	.num_resets = 64,
> >   };
> >   
> >   static const struct mtk_mmsys_match_data mt8195_mmsys_match_data
> > = {
> > @@ -234,18 +241,22 @@ static int mtk_mmsys_reset_update(struct
> > reset_controller_dev *rcdev, unsigned l
> >   {
> >   	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys,
> > rcdev);
> >   	unsigned long flags;
> > +	u32 offset;
> >   	u32 reg;
> >   
> > +	offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32);
> > +	id = id % MMSYS_SW_RESET_PER_REG;
> > +
> >   	spin_lock_irqsave(&mmsys->lock, flags);
> >   
> > -	reg = readl_relaxed(mmsys->regs + mmsys->data->sw0_rst_offset);
> > +	reg = readl_relaxed(mmsys->regs + mmsys->data->sw0_rst_offset +
> > offset);
> >   
> >   	if (assert)
> >   		reg &= ~BIT(id);
> >   	else
> >   		reg |= BIT(id);
> >   
> > -	writel_relaxed(reg, mmsys->regs + mmsys->data->sw0_rst_offset);
> > +	writel_relaxed(reg, mmsys->regs + mmsys->data->sw0_rst_offset +
> > offset);
> >   
> >   	spin_unlock_irqrestore(&mmsys->lock, flags);
> >   
> > @@ -360,18 +371,6 @@ static int mtk_mmsys_probe(struct
> > platform_device *pdev)
> >   		return ret;
> >   	}
> >   
> > -	spin_lock_init(&mmsys->lock);
> > -
> > -	mmsys->rcdev.owner = THIS_MODULE;
> > -	mmsys->rcdev.nr_resets = 32;
> > -	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> > -	mmsys->rcdev.of_node = pdev->dev.of_node;
> > -	ret = devm_reset_controller_register(&pdev->dev, &mmsys-
> > >rcdev);
> > -	if (ret) {
> > -		dev_err(&pdev->dev, "Couldn't register mmsys reset
> > controller: %d\n", ret);
> > -		return ret;
> > -	}
> > -
> 
> I'm not sure why you move that code block. It's not explained in the
> commit message.
> 
> Regards,
> Matthias

The reason for moving the code block is the need for getting mmsys-
>data first and then getting the nr_resets from mmsys->data-
>num_resets. So I move the whole reset code section behind the get
mmsys->data code section. I will explain more detail in the commit
message.

Regards,
Nancy





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux