Re: [PATCH] drm/msm/dp: move add fail safe mode to dp_connector_get_mode()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 4/22/2022 11:25 PM, Dmitry Baryshkov wrote:
On Sat, 23 Apr 2022 at 03:12, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:



On 4/22/2022 5:07 PM, Dmitry Baryshkov wrote:
On 23/04/2022 02:45, Kuogee Hsieh wrote:
Current DP driver implementation has adding safe mode done at
dp_hpd_plug_handle() which is expected to be executed under event
thread context.

However there is possible circular locking happen (see blow stack trace)
after edp driver call dp_hpd_plug_handle() from dp_bridge_enable() which
is executed under drm_thread context.

To break this circular locking, this patch have safe mode added at
dp_connector_get_mode() which is executed under drm thread context.
Therefore no lock acquired required for &dev->mode_config.mutex while
adding fail safe mode since it has been hold by drm thread already.

======================================================
   WARNING: possible circular locking dependency detected
   5.15.35-lockdep #6 Tainted: G        W
   ------------------------------------------------------
   frecon/429 is trying to acquire lock:
   ffffff808dc3c4e8 (&dev->mode_config.mutex){+.+.}-{3:3}, at:
dp_panel_add_fail_safe_mode+0x4c/0xa0

   but task is already holding lock:
   ffffff808dc441e0 (&kms->commit_lock[i]){+.+.}-{3:3}, at:
lock_crtcs+0xb4/0x124

   which lock already depends on the new lock.

   the existing dependency chain (in reverse order) is:

   -> #3 (&kms->commit_lock[i]){+.+.}-{3:3}:
          __mutex_lock_common+0x174/0x1a64
          mutex_lock_nested+0x98/0xac
          lock_crtcs+0xb4/0x124
          msm_atomic_commit_tail+0x330/0x748
          commit_tail+0x19c/0x278
          drm_atomic_helper_commit+0x1dc/0x1f0
          drm_atomic_commit+0xc0/0xd8
          drm_atomic_helper_set_config+0xb4/0x134
          drm_mode_setcrtc+0x688/0x1248
          drm_ioctl_kernel+0x1e4/0x338
          drm_ioctl+0x3a4/0x684
          __arm64_sys_ioctl+0x118/0x154
          invoke_syscall+0x78/0x224
          el0_svc_common+0x178/0x200
          do_el0_svc+0x94/0x13c
          el0_svc+0x5c/0xec
          el0t_64_sync_handler+0x78/0x108
          el0t_64_sync+0x1a4/0x1a8

   -> #2 (crtc_ww_class_mutex){+.+.}-{3:3}:
          __mutex_lock_common+0x174/0x1a64
          ww_mutex_lock+0xb8/0x278
          modeset_lock+0x304/0x4ac
          drm_modeset_lock+0x4c/0x7c
          drmm_mode_config_init+0x4a8/0xc50
          msm_drm_init+0x274/0xac0
          msm_drm_bind+0x20/0x2c
          try_to_bring_up_master+0x3dc/0x470
          __component_add+0x18c/0x3c0
          component_add+0x1c/0x28
          dp_display_probe+0x954/0xa98
          platform_probe+0x124/0x15c
          really_probe+0x1b0/0x5f8
          __driver_probe_device+0x174/0x20c
          driver_probe_device+0x70/0x134
          __device_attach_driver+0x130/0x1d0
          bus_for_each_drv+0xfc/0x14c
          __device_attach+0x1bc/0x2bc
          device_initial_probe+0x1c/0x28
          bus_probe_device+0x94/0x178
          deferred_probe_work_func+0x1a4/0x1f0
          process_one_work+0x5d4/0x9dc
          worker_thread+0x898/0xccc
          kthread+0x2d4/0x3d4
          ret_from_fork+0x10/0x20

   -> #1 (crtc_ww_class_acquire){+.+.}-{0:0}:
          ww_acquire_init+0x1c4/0x2c8
          drm_modeset_acquire_init+0x44/0xc8
          drm_helper_probe_single_connector_modes+0xb0/0x12dc
          drm_mode_getconnector+0x5dc/0xfe8
          drm_ioctl_kernel+0x1e4/0x338
          drm_ioctl+0x3a4/0x684
          __arm64_sys_ioctl+0x118/0x154
          invoke_syscall+0x78/0x224
          el0_svc_common+0x178/0x200
          do_el0_svc+0x94/0x13c
          el0_svc+0x5c/0xec
          el0t_64_sync_handler+0x78/0x108
          el0t_64_sync+0x1a4/0x1a8

   -> #0 (&dev->mode_config.mutex){+.+.}-{3:3}:
          __lock_acquire+0x2650/0x672c
          lock_acquire+0x1b4/0x4ac
          __mutex_lock_common+0x174/0x1a64
          mutex_lock_nested+0x98/0xac
          dp_panel_add_fail_safe_mode+0x4c/0xa0
          dp_hpd_plug_handle+0x1f0/0x280
          dp_bridge_enable+0x94/0x2b8
          drm_atomic_bridge_chain_enable+0x11c/0x168
          drm_atomic_helper_commit_modeset_enables+0x500/0x740
          msm_atomic_commit_tail+0x3e4/0x748
          commit_tail+0x19c/0x278
          drm_atomic_helper_commit+0x1dc/0x1f0
          drm_atomic_commit+0xc0/0xd8
          drm_atomic_helper_set_config+0xb4/0x134
          drm_mode_setcrtc+0x688/0x1248
          drm_ioctl_kernel+0x1e4/0x338
          drm_ioctl+0x3a4/0x684
          __arm64_sys_ioctl+0x118/0x154
          invoke_syscall+0x78/0x224
          el0_svc_common+0x178/0x200
          do_el0_svc+0x94/0x13c
          el0_svc+0x5c/0xec
          el0t_64_sync_handler+0x78/0x108
          el0t_64_sync+0x1a4/0x1a8

Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
   drivers/gpu/drm/msm/dp/dp_display.c |  6 ------
   drivers/gpu/drm/msm/dp/dp_panel.c   | 23 +++++++++++++----------
   2 files changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
b/drivers/gpu/drm/msm/dp/dp_display.c
index 92cd50f..01453db 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -555,12 +555,6 @@ static int dp_hpd_plug_handle(struct
dp_display_private *dp, u32 data)
       mutex_unlock(&dp->event_mutex);
-    /*
-     * add fail safe mode outside event_mutex scope
-     * to avoid potiential circular lock with drm thread
-     */
-    dp_panel_add_fail_safe_mode(dp->dp_display.connector);
-
       /* uevent will complete connection part */
       return 0;
   };
diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c
b/drivers/gpu/drm/msm/dp/dp_panel.c
index 1aa9aa8c..23fee42 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.c
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -151,15 +151,6 @@ static int dp_panel_update_modes(struct
drm_connector *connector,
       return rc;
   }
-void dp_panel_add_fail_safe_mode(struct drm_connector *connector)
-{
-    /* fail safe edid */
-    mutex_lock(&connector->dev->mode_config.mutex);
-    if (drm_add_modes_noedid(connector, 640, 480))
-        drm_set_preferred_mode(connector, 640, 480);
-    mutex_unlock(&connector->dev->mode_config.mutex);
-}
-
   int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
       struct drm_connector *connector)
   {
@@ -216,7 +207,11 @@ int dp_panel_read_sink_caps(struct dp_panel
*dp_panel,
               goto end;
           }
-        dp_panel_add_fail_safe_mode(connector);
+        /* fail safe edid */
+        mutex_lock(&connector->dev->mode_config.mutex);
+        if (drm_add_modes_noedid(connector, 640, 480))
+            drm_set_preferred_mode(connector, 640, 480);
+        mutex_unlock(&connector->dev->mode_config.mutex);
       }
       if (panel->aux_cfg_update_done) {
@@ -266,6 +261,14 @@ int dp_panel_get_modes(struct dp_panel *dp_panel,
           return -EINVAL;
       }
+    /*
+     * add fail safe mode (640x480) here
+     * since we are executed in drm_thread context,
+     * no mode_config.mutex acquired required
+     */
+    if (drm_add_modes_noedid(connector, 640, 480))
+        drm_set_preferred_mode(connector, 640, 480);
+
       if (dp_panel->edid)
           return dp_panel_update_modes(connector, dp_panel->edid);
Also, wouldn't calling get_modes() several times make cause adding more
and more 640x480 modes to the modes list?


Shouldnt DRM be blocking that here? Call should trickle down here only
if count_modes was 0

     if (out_resp->count_modes == 0) {
          if (is_current_master)
              connector->funcs->fill_modes(connector,
                               dev->mode_config.max_width,
                               dev->mode_config.max_height);
          else
              drm_dbg_kms(dev, "User-space requested a forced probe on
[CONNECTOR:%d:%s] but is not the DRM master, demoting to read-only probe",
                      connector->base.id, connector->name);
      }


count_modes is set by userspace:
         /*
          * This ioctl is called twice, once to determine how much space is
          * needed, and the 2nd time to fill it.
          */

So, nothing prevents userspace from passing zero count_mode more than once.
Ack, some non-optimized usermodes can do this.

However drm_helper_probe_single_connector_modes() will set old modes
to MODE_STALE and then will call get_modes().
Then drm_mode_prune_invalid() will prune stale modes. So, this should be fine.

Got it.
A more generic question is why do we need to add the mode in two places?

Answering behalf of kuogee but the two places are for different purposes:

1) When there is no EDID read

if (!dp_panel->edid) {

That case we should add the fail-safe mode as otherwise display will be blank for cases where there was nothing wrong with the monitor as such but the EDID read from aux failed for some reason. Even DRM does this but just not 640x480 here:

518 	if (count == 0 && (connector->status == connector_status_connected ||
519 			   connector->status == connector_status_unknown))
520 		count = drm_add_modes_noedid(connector, 1024, 768);


2) When there was a valid EDID but no 640x480 mode

This is the equipment specific case and the one even I was a bit surprised. There is a DP compliance equipment we have in-house and while validation, it was found that in its list of modes , it did not have any modes which chromebook supported ( due to 2 lanes ). But my understanding was that, all sinks should have atleast 640x480 but apparently this one did not have that. So to handle this DP compliance equipment behavior, we had to do this.

Thanks

Abhinav



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux