Add wb_idx to existing DRM prints in dpu_encoder and also
print the intf_mode so that its clear that for any INTF_CMD/VID
there will be a valid intf_idx and any INTF_WB_* there will be a
valid wb_idx.
Update the debugfs to add the same information. Here is a sample
output with this change:
root:/sys/kernel/debug/dri/0/encoder31# cat status
intf:1 wb:-1 vsync: 31 underrun: 0 mode: INTF_MODE_VIDEO
root:/sys/kernel/debug/dri/0/encoder33# cat status
intf:-1 wb:2 vsync: 7 underrun: 0 mode: INTF_MODE_WB_LINE
Also remove DPU_DEBUG_PHYS macros as its unused because the
respective dpu_encoder_phys_* files have their own macros.
changes in v2:
- use switch case instead of if/else-if for get_intf_type
Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 52 +++++++++++++----------------
1 file changed, 24 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 9ae9bd4..7bd20fa 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -37,18 +37,6 @@
#define DPU_ERROR_ENC(e, fmt, ...) DPU_ERROR("enc%d " fmt,\
(e) ? (e)->base.base.id : -1, ##__VA_ARGS__)
-#define DPU_DEBUG_PHYS(p, fmt, ...) DRM_DEBUG_ATOMIC("enc%d intf%d pp%d " fmt,\
- (p) ? (p)->parent->base.id : -1, \
- (p) ? (p)->intf_idx - INTF_0 : -1, \
- (p) ? ((p)->hw_pp ? (p)->hw_pp->idx - PINGPONG_0 : -1) : -1, \
- ##__VA_ARGS__)
-
-#define DPU_ERROR_PHYS(p, fmt, ...) DPU_ERROR("enc%d intf%d pp%d " fmt,\
- (p) ? (p)->parent->base.id : -1, \
- (p) ? (p)->intf_idx - INTF_0 : -1, \
- (p) ? ((p)->hw_pp ? (p)->hw_pp->idx - PINGPONG_0 : -1) : -1, \
- ##__VA_ARGS__)
-
/*
* Two to anticipate panels that can do cmd/vid dynamic switching
* plan is to create all possible physical encoder types, and switch between
@@ -262,12 +250,30 @@ static void _dpu_encoder_setup_dither(struct dpu_hw_pingpong *hw_pp, unsigned bp
hw_pp->ops.setup_dither(hw_pp, &dither_cfg);
}
+static char *dpu_encoder_helper_get_intf_type(enum dpu_intf_mode intf_mode)
+{
+ switch (intf_mode) {
+ case INTF_MODE_VIDEO:
+ return "INTF_MODE_VIDEO";
+ case INTF_MODE_CMD:
+ return "INTF_MODE_CMD";
+ case INTF_MODE_WB_BLOCK:
+ return "INTF_MODE_WB_BLOCK";
+ case INTF_MODE_WB_LINE:
+ return "INTF_MODE_WB_LINE";
+ default:
+ return "INTF_MODE_UNKNOWN";
+ }
+}
+
void dpu_encoder_helper_report_irq_timeout(struct dpu_encoder_phys *phys_enc,
enum dpu_intr_idx intr_idx)
{
- DRM_ERROR("irq timeout id=%u, intf=%d, pp=%d, intr=%d\n",
- DRMID(phys_enc->parent), phys_enc->intf_idx - INTF_0,
- phys_enc->hw_pp->idx - PINGPONG_0, intr_idx);
+ DRM_ERROR("irq timeout id=%u, intf_mode=%s intf=%d wb=%d, pp=%d, intr=%d\n",
+ DRMID(phys_enc->parent),
+ dpu_encoder_helper_get_intf_type(phys_enc->intf_mode),
+ phys_enc->intf_idx - INTF_0, phys_enc->wb_idx - WB_0,
+ phys_enc->hw_pp->idx - PINGPONG_0, intr_idx);
if (phys_enc->parent_ops->handle_frame_done)
phys_enc->parent_ops->handle_frame_done(
@@ -2048,22 +2054,12 @@ static int _dpu_encoder_status_show(struct seq_file *s, void *data)
for (i = 0; i < dpu_enc->num_phys_encs; i++) {
struct dpu_encoder_phys *phys = dpu_enc->phys_encs[i];
- seq_printf(s, "intf:%d vsync:%8d underrun:%8d ",
- phys->intf_idx - INTF_0,
+ seq_printf(s, "intf:%d wb:%d vsync:%8d underrun:%8d ",
+ phys->intf_idx - INTF_0, phys->wb_idx - WB_0,
atomic_read(&phys->vsync_cnt),
atomic_read(&phys->underrun_cnt));
- switch (phys->intf_mode) {
- case INTF_MODE_VIDEO:
- seq_puts(s, "mode: video\n");
- break;
- case INTF_MODE_CMD:
- seq_puts(s, "mode: command\n");
- break;
- default:
- seq_puts(s, "mode: ???\n");
- break;
- }
+ seq_printf(s, "mode: %s\n", dpu_encoder_helper_get_intf_type(phys->intf_mode));
}
mutex_unlock(&dpu_enc->enc_lock);
--
2.7.4
