Re: [PATCH resend v8 1/5] drm/bridge: nwl-dsi: Set PHY mode in nwl_dsi_mode_set()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
On Tue, Apr 19, 2022 at 09:08:48AM +0800, Liu Ying wrote:
> The Northwest Logic MIPI DSI host controller embedded in i.MX8qxp
> works with a Mixel MIPI DPHY + LVDS PHY combo to support either
> a MIPI DSI display or a LVDS display.  So, this patch calls
> phy_set_mode() from nwl_dsi_mode_set() to set PHY mode to MIPI DPHY
> explicitly.
> 
> Cc: Guido Günther <agx@xxxxxxxxxxx>
> Cc: Robert Chiras <robert.chiras@xxxxxxx>
> Cc: Martin Kepplinger <martin.kepplinger@xxxxxxx>
> Cc: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
> Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Jonas Karlman <jonas@xxxxxxxxx>
> Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
> Cc: David Airlie <airlied@xxxxxxxx>
> Cc: Daniel Vetter <daniel@xxxxxxxx>
> Cc: NXP Linux Team <linux-imx@xxxxxxx>
> Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
> ---
> v7->v8:
> * Resend with Andrzej's and Jernej's mail addressed updated.
> 
> v6->v7:
> * No change.
> 
> v5->v6:
> * Rebase the series upon v5.17-rc1.
> * Set PHY mode in ->mode_set() instead of ->pre_enable() in the nwl-dsi
>   bridge driver due to the rebase.
> * Drop Guido's R-b tag due to the rebase.
> 
> v4->v5:
> * No change.
> 
> v3->v4:
> * No change.
> 
> v2->v3:
> * No change.
> 
> v1->v2:
> * Add Guido's R-b tag.
> 
>  drivers/gpu/drm/bridge/nwl-dsi.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
> index d5945501a5ee..85bab7372af1 100644
> --- a/drivers/gpu/drm/bridge/nwl-dsi.c
> +++ b/drivers/gpu/drm/bridge/nwl-dsi.c
> @@ -666,6 +666,12 @@ static int nwl_dsi_mode_set(struct nwl_dsi *dsi)
>  		return ret;
>  	}
>  
> +	ret = phy_set_mode(dsi->phy, PHY_MODE_MIPI_DPHY);
> +	if (ret < 0) {
> +		DRM_DEV_ERROR(dev, "Failed to set DSI phy mode: %d\n", ret);
> +		goto uninit_phy;
> +	}
> +
>  	ret = phy_configure(dsi->phy, phy_cfg);
>  	if (ret < 0) {
>  		DRM_DEV_ERROR(dev, "Failed to configure DSI phy: %d\n",
> ret);

I can't currently test this but it still looks good so

Reviewed-by: Guido Günther <agx@xxxxxxxxxxx>

Cheers,
 -- Guido

> -- 
> 2.25.1
> 



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux