Add a reset_intf_cfg operation for dpu_hw_ctl to reset the
entire CTL path by disabling each component namely layer mixer,
3d-merge and interface blocks.
changes in v3:
- none
Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 32 ++++++++++++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 8 ++++++++
2 files changed, 40 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index dc27579..524f024 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -563,6 +563,37 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
DPU_REG_WRITE(c, CTL_TOP, intf_cfg);
}
+static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
+ struct dpu_hw_intf_cfg *cfg)
+{
+ struct dpu_hw_blk_reg_map *c = &ctx->hw;
+ u32 intf_active = 0;
+ u32 merge3d_active = 0;
+
+ /*
+ * This API resets each portion of the CTL path namely,
+ * clearing the sspps staged on the lm, merge_3d block,
+ * interfaces etc to ensure clean teardown of the pipeline.
+ * This will be used for writeback to begin with to have a
+ * proper teardown of the writeback session but upon further
+ * validation, this can be extended to all interfaces.
+ */
+ if (cfg->merge_3d) {
+ merge3d_active = DPU_REG_READ(c, CTL_MERGE_3D_ACTIVE);
+ merge3d_active &= ~BIT(cfg->merge_3d - MERGE_3D_0);
+ DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
+ merge3d_active);
+ }
+
+ dpu_hw_ctl_clear_all_blendstages(ctx);
+
+ if (cfg->intf) {
+ intf_active = DPU_REG_READ(c, CTL_INTF_ACTIVE);
+ intf_active &= ~BIT(cfg->intf - INTF_0);
+ DPU_REG_WRITE(c, CTL_INTF_ACTIVE, intf_active);
+ }
+}
+
static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx,
unsigned long *fetch_active)
{
@@ -586,6 +617,7 @@ static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
if (cap & BIT(DPU_CTL_ACTIVE_CFG)) {
ops->trigger_flush = dpu_hw_ctl_trigger_flush_v1;
ops->setup_intf_cfg = dpu_hw_ctl_intf_cfg_v1;
+ ops->reset_intf_cfg = dpu_hw_ctl_reset_intf_cfg_v1;
ops->update_pending_flush_intf =
dpu_hw_ctl_update_pending_flush_intf_v1;
ops->update_pending_flush_merge_3d =
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
index 97f326d..c61a8fd 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
@@ -140,6 +140,14 @@ struct dpu_hw_ctl_ops {
void (*setup_intf_cfg)(struct dpu_hw_ctl *ctx,
struct dpu_hw_intf_cfg *cfg);
+ /**
+ * reset ctl_path interface config
+ * @ctx : ctl path ctx pointer
+ * @cfg : interface config structure pointer
+ */
+ void (*reset_intf_cfg)(struct dpu_hw_ctl *ctx,
+ struct dpu_hw_intf_cfg *cfg);
+
int (*reset)(struct dpu_hw_ctl *c);
/*
--
2.7.4
