Connector detection using poll method won't work in case of bridge attached to the encoder with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR, as the code defaults to HPD. Enable DRM_BRIDGE_OP_HPD based on HPD interrupt availability, so that it will fall back to polling, if HPD is not available. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 668dcefbae17..b3f10c54e064 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -1292,8 +1292,10 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id) goto err_unregister_cec; adv7511->bridge.funcs = &adv7511_bridge_funcs; - adv7511->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID - | DRM_BRIDGE_OP_HPD; + adv7511->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID; + if (adv7511->i2c_main->irq) + adv7511->bridge.ops |= DRM_BRIDGE_OP_HPD; + adv7511->bridge.of_node = dev->of_node; adv7511->bridge.type = DRM_MODE_CONNECTOR_HDMIA; -- 2.25.1
