From: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe fails before mipi_dsi_device_register_full is called, then in trying to log the error message if uses ts->dsi->dev when it is still NULL. Use ts->i2c->dev instead, which is initialised earlier in probe. Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.") Signed-off-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> --- drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c index 46029c5610c8..1f805eb8fdb5 100644 --- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c +++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c @@ -229,7 +229,7 @@ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts, ret = i2c_smbus_write_byte_data(ts->i2c, reg, val); if (ret) - dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret); + dev_err(&ts->i2c->dev, "I2C write failed: %d\n", ret); } static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val) -- 2.25.1