Re: [PATCH v7 1/4] drm/msm/dp: Add eDP support via aux_bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/04/2022 23:09, Doug Anderson wrote:
Hi,

On Thu, Apr 14, 2022 at 12:40 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:

Quoting Dmitry Baryshkov (2022-04-14 12:16:14)

I think it's too verbose and a bit incorrect.

Not sure which part you're asserting is incorrect, but shorter is OK w/ me too.

I was referring to the "If we don't implement the ops..." part. For some reason I thought that panel implements detect() callback (and thus the DRM will not care because the next bridge takes precedence).

However I was mistaken, please excuse me. Your description was correct and I was wrong. The panel bridge doesn't implement callback. Most probably I mixed it with the display_connector bridge.

So... your description is more correct.



This is a bit saner:
/*
   * These ops do not make sense for eDP, since they are provided
   * by the panel-bridge corresponding to the attached eDP panel.
   */

My question was whether we really need to disable them for eDP since for
eDP the detect and and get_modes will be overridden anyway.

Hmm, interesting. Probably for DRM_BRIDGE_OP_MODES that will work?
It's definitely worth confirming but from my reading of the code it
_probably_ wouldn't hurt.

One thing someone would want to confirm would be what would happen if
we move this code and the panel code to implement DRM_BRIDGE_OP_EDID
properly. It looks as if both actually ought to be implementing that
instead of DRM_BRIDGE_OP_MODES, at least in some cases. A fix for a
future day. Could we get into trouble if one moved before the other?
Then the panel would no longer override the eDP controller and the eDP
controller would try to read from a possibly unpowered panel?

That would depend on the way the get_edid would be implemented in DP driver. Currently the edid is cached via the dp_display_process_hpd_high() -> dp_panel_read_sink_caps() call chain.

With this patchset, the dp_hpd_plug_handle() -> dp_display_usbpd_configure_cb() -> dp_display_process_hpd_high() will be called too late for the get_modes/get_edid (from dp_bridge's enable() op).

There is another issue. drm_panel has only get_modes() callback, so panel_bridge can not implement get_edid() unless we extend the panel interface (which might be a good idea).


So I guess in the end my preference would be that we know that driving
the EDID read from the controller isn't a great idea for eDP (since we
have no way to ensure that the panel is powered) so why risk it and
set the bit saying we can do it?

Yep.


For hotplug/detect I'm even less confident that setting the bits would
be harmless. I haven't sat down and traced everything, but from what I
can see the panel _doesn't_ set these bits, does it? I believe that
the rule is that when every bridge in the chain _doesn't_ implement
detect/hotplug that the panel is always present. The moment someone
says "hey, I can detect" then it suddenly becomes _not_ always
present. Yes, I guess we could have the panel implement "detect" and
return true, but I'm not convinced that's actually better...

I think it makes sense to implement OP_DETECT in panel bridge (that always returns connector_status_connected) at least to override the possible detect ops in previous bridges.

And to go further, I'd expect that a bridge should expose the
functionality that it supports, regardless of what is connected down the
chain. Otherwise we won't be able to mix and match bridges because the
code is brittle, making assumptions about what is connected.

 From my point of view the bridge simply doesn't support any of the
three things when we're in eDP mode. Yes, it's the same driver. Yes,
eDP and DP share nearly the same signalling on the wire. Yes, it's
easily possible to make a single controller that supports DP and eDP.
...but the rules around detection and power sequencing are simply
different for the two cases.

I just hope that during refactoring this can be expressed in a more natural way.

The controller simply _cannot_ detect
whether the panel is connected in the eDP case and it _must_ assume
that the panel is always connected. Yes, it has an HPD pin. No, that
HPD pin doesn't tell when the panel is present. The panel is always
present. The panel is always present.

Yep, I remember regarding the HPD pin. And I still think that panel-edp (and panel bridge) should provide an overriding OP_DETECT.

So, IMO, it is _incorrect_ to say we can support HPD and DETECT if we
know we're in eDP mode.

I see your point. Let's do it this way. Maybe (hopefully) it will become more logical during refactoring. Or maybe I'll just tune myself into the DP/eDP logic :D

--
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux